Side view of the Bosch GDX18V-1860CN impact driver/wrench (bare tool), highlighting the compact design and the two-in-one hex/square drive head.
Annotated diagram of the Bosch GDX18V-1860CN impact driver, labeling features such as the two-in-one drive, powerful brushless motor, Auto Bolt Release, and connectivity options.
Side profile of the Bosch GDX18V-1860CN impact driver/wrench (bare tool), showing the attached belt clip, red accents, and the two-in-one drive head.
Front-on view of the Bosch GDX18V-1860CN impact driver/wrench, highlighting the 1/2 inch square drive anvil and the red impact mechanism ring.
Top-down view of the Bosch GDX18V-1860CN handle and base, highlighting the brushless motor placement and the belt clip attached to the side.
Composite image detailing the Bosch GDX18V-1860CN's two-in-one drive: the top image shows a screwdriver bit inserted into the 1/4 inch hex chuck, and the bottom image shows a 1/2 inch socket fitting over the hex chuck assembly. Text reads: QUICKLY CHANGE FROM BITS TO SOCKETS.
A worker using the Bosch GDX18V-1860CN impact driver (with a drill bit) to fasten into a concrete wall, holding a level in the opposite hand to ensure accuracy.
A worker wearing safety gear uses the Bosch GDX18V-1860CN impact driver (with an attached battery) to fasten components into a large piece of ceiling HVAC ductwork.
A worker wearing leather gloves uses the Bosch GDX18V-1860CN impact driver (with an attached battery) to fasten a clamp onto a metal pipe railing on a construction site.
Side view of the Bosch GDX18V-1860CN impact driver/wrench (bare tool), highlighting the compact design and the two-in-one hex/square drive head.
Annotated diagram of the Bosch GDX18V-1860CN impact driver, labeling features such as the two-in-one drive, powerful brushless motor, Auto Bolt Release, and connectivity options.
Side profile of the Bosch GDX18V-1860CN impact driver/wrench (bare tool), showing the attached belt clip, red accents, and the two-in-one drive head.
Front-on view of the Bosch GDX18V-1860CN impact driver/wrench, highlighting the 1/2 inch square drive anvil and the red impact mechanism ring.
Top-down view of the Bosch GDX18V-1860CN handle and base, highlighting the brushless motor placement and the belt clip attached to the side.
Composite image detailing the Bosch GDX18V-1860CN's two-in-one drive: the top image shows a screwdriver bit inserted into the 1/4 inch hex chuck, and the bottom image shows a 1/2 inch socket fitting over the hex chuck assembly. Text reads: QUICKLY CHANGE FROM BITS TO SOCKETS.
A worker using the Bosch GDX18V-1860CN impact driver (with a drill bit) to fasten into a concrete wall, holding a level in the opposite hand to ensure accuracy.
A worker wearing safety gear uses the Bosch GDX18V-1860CN impact driver (with an attached battery) to fasten components into a large piece of ceiling HVAC ductwork.
A worker wearing leather gloves uses the Bosch GDX18V-1860CN impact driver (with an attached battery) to fasten a clamp onto a metal pipe railing on a construction site.
Bosch

Bosch GDX18V-1860CN Impact Driver Wrench 18V Brushless Two-in-One 1/4" Hex and 1/2" Socket Tool with 1,860 In.-Lbs. Torque (Bare Tool)

In stock
SKU: GDX18V-1860CN
$159.00
Description

The FREAK Tool: Two-in-One Impact Driver and Wrench with Custom Mode Control

The Bosch GDX18V-1860CN Two-in-One Impact Driver/Wrench, nicknamed "The Freak," is designed for ultimate versatility and efficiency on the jobsite. This single tool features a two-in-one bit/socket drive—a 1/4 in. hex shank for bits and a 1/2 in. square drive for sockets—eliminating the need for fragile adapters. Its powerful brushless motor delivers a maximum of 1,860 In.-Lbs. of torque and up to 4,100 impacts per minute (IPM). With three speed/torque settings, plus special preset modes (like Auto Bolt Release to prevent dropped fasteners), this tool gives you unmatched control, especially when connected to the Bosch PRO360 App (module sold separately) for advanced customization.

**Battery and charger sold separately.**

Key Features

  • Two-in-One Drive: Features a combined 1/4" Hex shank and 1/2" Square drive anvil, allowing seamless switching between bits and sockets without adapters.
  • High Torque & IPM: Powerful brushless motor delivers max 1,860 In.-Lbs. of torque and up to 4,100 IPM for professional-grade fastening.
  • Smart Control Modes: Includes Advanced Modes with presets for metal and wood screws, plus Auto Bolt Release (in reverse) to prevent dropped nuts/bolts during removal.
  • Customization Ready: Connected-Ready (module sold separately) allows linking to the Bosch PRO360 App to customize settings and receive tool feedback.
  • Precision Speed: Variable-speed trigger and three speed/torque settings provide accurate control for delicate or heavy-duty applications.
  • Protection Features: Electronic Cell and Motor Protection helps safeguard the tool and battery from overloading conditions.

What's Included

  • (1) GDX18V-1860C 18V Connected-Ready Two-In-One Impact Driver/Wrench (Bare Tool)
  • (1) 4x Bit Holder
  • (1) Belt Clip

Specifications

Attribute Value
Drive Type 1/4" Hex & 1/2" Square
Max Torque (in. lbs.) 1,860 in.-lbs.
Max IPM 4,100
No Load RPM (3 Speed) 0-1,100 / 0-2,300 / 0-3,400
Weight (Tool Only) 2.6 lb
Length 5.8 Inches
Motor Type Brushless
Battery System 18V LXT® (AMPShare™ Compatible)
Connectivity Bosch PRO360 App Ready (Module Sold Separately)
Recommended Battery GBA18V40 / GBA18V80 (For Max Performance)

Looking to expand your capabilities? To ensure this impact driver/wrench delivers peak performance for your high-torque applications, we strongly recommend powering it with the best battery available. Consider upgrading to the Bosch CORE18V 8.0 Ah PROFACTOR Performance Battery (GBA18V80). This high-capacity battery provides up to 75% more power and 50% more runtime than the 4.0 Ah version, making it the essential power source for your most demanding driving and wrenching tasks.