1 Top Tools Framing Nails P21113HDGR 2-3/8 In x 0.113 In 8d (2000 Count HDG Ring Shank Steel 21 Degree Collated Pressure Treated Deck Fastener)
Couldn't load pickup availability
Industrial-Grade 2-3/8 Inch x 0.113 Inch 8d 21 Degree Collated HDG Ring Shank Framing Nails 2000 Count
The 1 Top Tools 2-3/8-Inch x 0.113-Inch (8d Size) Hot-Dipped Galvanized Ring Shank Framing Nails function as commercial-grade collated pneumatic fasteners engineered to execute high-durability exterior timber framing, pressure-treated decking installation, and perimeter fencing assembly. Formulated from high-tensile carbon steel encapsulated in a thick Hot-Dipped Galvanized (HDG) molten zinc barrier, these 21-degree plastic-strip collated nails feature annular ring shanks that interlock with wood fibers to prevent fastener backing-out and board squeaking. Incorporating a 0.113-inch wire gauge shank diameter, diamond point tip, and full round head profile for high pull-through resistance, the 2,000-count fastener bulk box maintains rapid jam-free feeding across continuous pneumatic framing passes in outdoor environments.
Best Used For:
- Pressure-Treated Deck Framing & Sub-Structures: Fastening pressure-treated deck joists, ledger boards, and decking substructures exposed to high ground moisture and ACQ/CA-B chemical preservatives.
- Exterior Cedar & Redwood Fencing: Securing cedar pickets, redwood fence rails, and outdoor timber panels without creating rust bleed streaks or surface fastener pops.
- Outdoor Wall Framing & Exterior Sheathing: Attaching exterior plywood wall sheathing, shear panels, and roof decking exposed to humid weathering conditions.
Key Performance & Safety Features
- Hot-Dipped Galvanized (HDG) Zinc Barrier: Heavy molten zinc coating provides sacrificial corrosion defense specifically approved for use in pressure-treated lumber.
- High-Holding Power Ring Shank: Annular ridges act like locking barbs to wedge into timber fibers, maximizing resistance against wood cupping and load withdrawal.
- Full Round Head (FRH) Geometry: Delivers maximum surface contact area for high pull-through resistance and strict structural building code compliance.
- 21-Degree Plastic Strip Collation: Precision-angled collation strips feed smoothly into standard 21-degree pneumatic framing nailers and shatter cleanly upon driver impact.
- Standard 8d Industrial Sizing: 2-3/8-inch length and 0.113-inch diameter meet standard structural specs for exterior wood-to-wood connections.
- Bulk 2,000-Piece Contractor Box: Packed in a 2M quantity box to maintain continuous job site productivity with fewer magazine reloads.
What's Included
- (2,000) 1 Top Tools 2-3/8" x 0.113" 8d 21-Degree Hot-Dipped Galvanized Ring Shank Collated Framing Nails
Technical Specifications
| Brand Name | 1 Top Tools |
| Model Number SKU | P21113HDGR |
| Tool Classification | Collated Pneumatic Framing Nails |
| Fastener Length | 2.375 in. (2-3/8 in.) |
| Shank Diameter Gauge | 0.113 in. Gauge Wire (8d Penny Size) |
| Shank Geometry Profile | Annular Ring Shank (Screw Style) |
| Collation Angle Rating | 21 Degrees Plastic Collated |
| Fastener Protective Finish | Hot-Dipped Galvanized (HDG) Zinc Coating |
| Fastener Head Profile | Full Round Head (FRH) |
| Nail Point Style | Diamond Point |
| Package Quantity Count | 2,000 Nails (2M Pack) |
| Structural Material Composition | High-Tensile Carbon Steel Wire |
| Primary Machine Compatibility | 21-Degree Full Round Head Pneumatic Framing Nailers |
| Target Substrates & Lumber | Pressure-Treated Lumber, Cedar, Redwood, Exterior Sheathing, Decking |
Pro-Tip: When installing tongue-and-groove decking or exterior wall sheathing panels using these 8d 2-3/8-inch HDG ring shank nails, calibrate your 21-degree pneumatic nailer pressure to approximately 90–100 PSI. Driving the full round head flush leaves the thick protective zinc barrier intact over the nail head, preventing standing rainwater from degrading the steel core inside pressure-treated lumber joints.