1 Top Tools Framing Nails P21113HDGSCR 2-3/8 In x 0.113 In 8d (2000 Count HDG Screw Shank Steel 21 Degree Collated Decking Fastener)

Industrial-Grade 2-3/8 Inch x 0.113 Inch 8d 21 Degree Collated HDG Screw Shank Framing Nails 2000 Count

The 1 Top Tools 2-3/8-Inch x 0.113-Inch (8d Size) Hot-Dipped Galvanized Screw Shank Framing Nails function as commercial-grade collated pneumatic fasteners engineered to execute heavy-duty exterior timber framing, pressure-treated decking installation, and roof truss assembly. Manufactured from high-tensile carbon steel encapsulated in a Hot-Dipped Galvanized (HDG) zinc coating meeting ASTM A153 Class D standards, these 21-degree plastic-strip collated nails feature spiral screw shanks that rotate upon pneumatic impact to create an interlocking mechanical bond within wood fibers. Incorporating a 0.113-inch wire gauge shank diameter, diamond point tip, and full round head profile for high pull-through resistance, the 2,000-count fastener bulk pack ensures jam-free feeding and severe corrosion defense in ACQ and MCQ pressure-treated lumber applications.

Best Used For:

• Pressure-Treated Decking & Sub-Structures: Fastening pressure-treated ACQ/MCQ deck joists, ledger boards, and decking planks exposed to high ground moisture and chemical preservatives.
• Roof Truss & Exterior Timber Framing: Threading spiral screw shanks into roof trusses, floor joists, and wall plates to prevent structural fastener withdrawal under heavy load stresses.
• Exterior Cedar & Redwood Fencing: Securing cedar pickets, fence rails, and exterior wood siding panels without creating rust bleed lines or surface fastener pops.

Key Performance & Safety Features

• ASTM A153 Class D HDG Galvanization: Molten zinc coating provides sacrificial corrosion defense specifically approved for ACQ and MCQ pressure-treated lumber.
• Spiral Thread Screw Shank Geometry: Helical threads rotate during driving to form an interlocking mechanical anchor inside timber fibers, maximizing withdrawal resistance.
• Full Round Head (FRH) Profile: Delivers maximum surface contact area for high pull-through resistance and strict structural building code compliance.
• 21-Degree Plastic Strip Collation: Precision-angled plastic collation strips feed smoothly into standard 21-degree pneumatic framing nailers and shatter cleanly upon impact.
• Standard 8d Industrial Sizing: 2-3/8-inch length and 0.113-inch diameter meet standard structural specifications for wood-to-wood framing connections.
• Bulk 2,000-Piece Contractor Box: Packed in a 2M quantity box to maintain continuous job site productivity with fewer magazine reloads.

What's Included

• (2,000) 1 Top Tools 2-3/8" x 0.113" 8d 21-Degree Hot-Dipped Galvanized Screw Shank Collated Framing Nails

Technical Specifications

Pro-Tip: When installing ACQ or MCQ pressure-treated decking joists or roof trusses using these 8d 2-3/8-inch ASTM A153 Class D HDG screw shank nails, set your 21-degree pneumatic nailer pressure to approximately 90–100 PSI. As the nail drives, the spiral shank rotates and locks into the wet timber while keeping the heavy zinc layer intact on the full round head face to prevent preservative chemicals from degrading the inner steel core.