1 Top Tools Framing Nails P21113S 2-3/8 In x 0.113 In 8d (2000 Count Bright CTD Smooth Shank Steel 21 Degree Collated Sheathing Deck Fastener)
Couldn't load pickup availability
Industrial-Grade 2-3/8 Inch x 0.113 Inch 8d 21 Degree Collated Bright Smooth Shank Framing Nails 2000 Count
The 1 Top Tools 2-3/8-Inch x 0.113-Inch (8d Size) Bright Smooth Shank Framing Nails function as contractor-grade collated pneumatic fasteners engineered to execute high-speed interior wall framing, plywood sheathing installation, and subfloor decking attachment. Formulated from high-tensile carbon steel treated with a friction-reducing bright CTD resin coating, these 21-degree plastic-strip collated nails feature a smooth shank profile that glides into dimensional lumber to minimize driving resistance and tool piston wear. Incorporating a 0.113-inch wire gauge shank diameter, diamond point tip, and full round head design for high pull-through resistance, the 2,000-count fastener bulk box ensures consistent jam-free feeding across continuous pneumatic framing passes in non-corrosive indoor environments.
Best Used For:
- Interior Wall Framing & Timber Assembly: Fastening non-treated 2x4 and 2x6 dimensional lumber framing plates, studs, joists, and timber headers.
- Subfloor & Plywood Sheathing Attachment: Securing interior subfloor panels, OSB wall sheathing, and roof decking to structural joist bays.
- Indoor Wood Decking Sub-Structures & Carpentry: Assembling indoor floor framing grid systems, wooden crates, and structural timber joints where moisture protection is not required.
Key Performance & Safety Features
- Low-Friction Bright CTD Resin Coating: Polymer resin finish lubricates the shank during high-speed driving, then sets to enhance frictional holding power.
- High-Speed Penetration Smooth Shank: Uniform 0.113-inch smooth wire profile reduces penetration drag and protects pneumatic driver blades from premature wear.
- Full Round Head (FRH) Geometry: Delivers maximum surface contact area for high pull-through resistance and strict structural building code compliance.
- 21-Degree Plastic Strip Collation: Precision-angled plastic collation strips feed smoothly into 21-degree framing nailers and shatter cleanly upon driver impact.
- Standard 8d Structural Sizing: 2-3/8-inch length and 0.113-inch diameter meet standard code specs for interior wood-to-wood structural connections.
- Bulk 2,000-Piece Contractor Box: Packed in a 2M quantity box to maintain continuous job site productivity with fewer magazine reloads.
What's Included
- (2,000) 1 Top Tools 2-3/8" x 0.113" 8d 21-Degree Bright Smooth Shank Collated Framing Nails
Technical Specifications
| Brand Name | 1 Top Tools |
| Model Number SKU | P21113S |
| Tool Classification | Collated Pneumatic Framing Nails |
| Fastener Length | 2.375 in. (2-3/8 in.) |
| Shank Diameter Gauge | 0.113 in. Gauge Wire (8d Penny Size) |
| Shank Geometry Profile | Smooth Shank |
| Collation Angle Rating | 21 Degrees Plastic Collated |
| Fastener Protective Finish | Bright Coated (CTD Resin Finish) |
| Fastener Head Profile | Full Round Head (FRH) |
| Nail Point Style | Diamond Point |
| Package Quantity Count | 2,000 Nails (2M Pack) |
| Structural Material Composition | High-Tensile Carbon Steel Wire |
| Primary Machine Compatibility | 21-Degree Full Round Head Pneumatic Framing Nailers |
| Target Substrates & Lumber | Non-Treated Framing Lumber, OSB Panels, Plywood Subflooring, Wood Sheathing |
Pro-Tip: When high-speed toe-nailing interior stud wall plates with these 8d 2-3/8-inch bright smooth shank nails, set your 21-degree framing nailer pressure to approximately 85–95 PSI. The lubricated CTD resin coating reduces driving friction, allowing the full round head to seat tight against the stud angle without splitting the softwood framing timber.