1 Top Tools Framing Nails P21113HDGS 2-3/8 In x 0.113 In 8d (2000 Count HDG Smooth Shank Steel 21 Degree Collated Pressure Treated Decking Fastener)

Industrial-Grade 2-3/8 Inch x 0.113 Inch 8d 21 Degree Collated HDG Smooth Shank Framing Nails 2000 Count

The 1 Top Tools 2-3/8-Inch x 0.113-Inch (8d Size) Hot-Dipped Galvanized Smooth Shank Framing Nails function as contractor-grade collated pneumatic fasteners engineered to execute high-speed exterior timber framing, pressure-treated decking installation, and perimeter fencing assembly. Formulated from high-tensile carbon steel encapsulated in a thick Hot-Dipped Galvanized (HDG) molten zinc protective barrier, these 21-degree plastic-strip collated nails feature a smooth shank profile that glides into dense lumber to minimize driver blade wear and air consumption. Incorporating a 0.113-inch wire gauge shank diameter, diamond point tip, and full round head profile for high pull-through resistance, the 2,000-count fastener bulk box maintains rapid jam-free feeding across continuous pneumatic framing passes in outdoor environments.

Best Used For:

• Pressure-Treated Deck Framing & Sub-Structures: Fastening pressure-treated deck joists, ledger boards, and decking substructures exposed to high ground moisture and ACQ/CA-B preservatives.
• Exterior Cedar & Redwood Fencing: Securing cedar pickets, redwood fence rails, and outdoor timber panels without creating rust bleed streaks.
• Outdoor Wall Framing & Exterior Sheathing: Attaching exterior plywood wall sheathing, shear panels, and roof decking exposed to humid weathering conditions.

Key Performance & Safety Features

• Hot-Dipped Galvanized (HDG) Zinc Barrier: Heavy molten zinc coating provides sacrificial corrosion defense specifically approved for use in pressure-treated lumber.
• High-Speed Penetration Smooth Shank: Uniform 0.113-inch smooth wire profile reduces penetration drag and protects pneumatic driver blades from premature wear.
• Full Round Head (FRH) Geometry: Delivers maximum surface contact area for high pull-through resistance and strict structural building code compliance.
• 21-Degree Plastic Strip Collation: Precision-angled collation strips feed smoothly into standard 21-degree pneumatic framing nailers and shatter cleanly upon driver impact.
• Standard 8d Industrial Sizing: 2-3/8-inch length and 0.113-inch diameter meet standard structural specs for exterior wood-to-wood connections.
• Bulk 2,000-Piece Contractor Box: Packed in a 2M quantity box to maintain continuous job site productivity with fewer magazine reloads.

What's Included

• (2,000) 1 Top Tools 2-3/8" x 0.113" 8d 21-Degree Hot-Dipped Galvanized Smooth Shank Collated Framing Nails

Technical Specifications

Pro-Tip: When driving these 8d 2-3/8-inch HDG smooth shank nails into wet, pressure-treated decking joists or heavy fence rails, calibrate your pneumatic framing nailer operating pressure to approximately 85–95 PSI. Smooth shanks require less air volume to penetrate wet lumber, so lowering the air pressure prevents over-countersinking and keeps the hot-dipped zinc protective layer on the nail head flush with the wood surface.