1 Top Tools Framing Nails P21113HDG 2 In x 0.113 In (2000 Count HDG Ring Shank Steel 21 Degree Collated Pressure Treated Wood Fastener)

High-Performance 2 Inch x 0.113 Inch 21 Degree Collated HDG Ring Shank Framing Nails 2000 Count

The 1 Top Tools 2-Inch x 0.113-Inch Hot-Dipped Galvanized Ring Shank Framing Nails operate as commercial-grade collated pneumatic fasteners engineered to deliver maximum corrosion resistance and withdrawal power when securing pressure-treated lumber, exterior decking, and cedar structures. Manufactured from high-tensile carbon steel encapsulated in a thick Hot-Dipped Galvanized (HDG) protective zinc barrier, these 21-degree plastic-strip collated nails feature annular ring shanks that interlock with wood fibers to prevent fastener backing-out and structural squeaking. Incorporating a 0.113-inch wire gauge shank diameter, diamond point tip, and full round head design for high pull-through resistance, the 2,000-count fastener bulk pack maintains reliable jam-free feeding across high-volume pneumatic framing passes in exterior environments.

Best Used For:

• Pressure-Treated Decking & Sub-Structures: Fastening pressure-treated joists, ledger boards, and decking planks exposed to high-moisture ground contact.
• Exterior Cedar & Redwood Siding Installation: Securing exterior wood siding and trim panels without creating rust bleed lines or surface fastener pops.
• Outdoor Structural Framing & Sheathing: Attaching exterior shear wall sheathing, fence posts, and roof decking exposed to humid weathering conditions.

Key Performance & Safety Features

• Hot-Dipped Galvanized (HDG) Coating: Heavy zinc coating provides ultimate sacrificial corrosion protection against chemicals in pressure-treated lumber.
• High-Holding Power Ring Shank: Annular ridges act like locking barbs to wedge into timber fibers, maximizing resistance against wood cupping and load withdrawal.
• Full Round Head (FRH) Geometry: Delivers maximum surface contact area for high pull-through resistance and strict structural building code compliance.
• 21-Degree Plastic Strip Collation: Angled plastic collation strips feed smoothly into standard 21-degree framing nailers and shatter cleanly upon driver impact.
• Industrial Carbon Steel Core: High-tensile steel wire resists shank bending during rapid driving into dense wet-treated framing lumber.
• Bulk 2,000-Piece Contractor Box: Packed in a 2M quantity box to maintain continuous job site productivity with fewer magazine reloads.

What's Included

• (2,000) 1 Top Tools 2" x 0.113" 21-Degree Hot-Dipped Galvanized Ring Shank Collated Framing Nails

Technical Specifications

Pro-Tip: When fastening copper-treated exterior lumber (ACQ or CA-B) with these Hot-Dipped Galvanized nails, set the drive depth on your 21-degree framing nailer so the full round head seats flush without tearing the outer zinc layer. Keeping the HDG coating intact prevents chemical reactions between the wood preservatives and the steel core, ensuring decades of corrosion-free holding power.