1 Top Tools Framing Nails P21113HDG 2 In x 0.113 In 6d (2000 Count HDG Ring Shank Steel 21 Degree Collated Pressure Treated Decking Fastener)

Industrial-Grade 2 Inch x 0.113 Inch 6d 21 Degree Collated HDG Ring Shank Framing Nails 2000 Count

The 1 Top Tools 2-Inch x 0.113-Inch (6d Size) Hot-Dipped Galvanized Ring Shank Framing Nails function as contractor-grade collated pneumatic fasteners engineered to deliver high corrosion resistance and maximum withdrawal power when securing pressure-treated lumber, exterior decking, and structural sheathing. Formulated from high-tensile carbon steel encapsulated in a thick Hot-Dipped Galvanized (HDG) protective zinc barrier, these 21-degree plastic-strip collated nails feature annular ring shank threads that interlock directly with wood fibers to eliminate nail-pop and board shifting over time. Incorporating a 0.113-inch shank diameter, diamond point tip, and full round head profile for high pull-through resistance, the 2,000-count fastener bulk pack ensures consistent jam-free feeding across high-volume pneumatic framing passes in outdoor environments.

Best Used For:

• Pressure-Treated Decking & Sub-Structures: Fastening pressure-treated deck joists, ledger boards, and decking planks exposed to high ground moisture and chemical preservatives.
• Exterior Wall Framing & Sheathing: Securing exterior wall sheathing, plywood shear walls, and structural wood framing in high-humidity outdoor applications.
• General Outdoor Carpentry & Siding: Attaching fence panels, exterior trim, and timber sub-assemblies without creating rust bleed streaks or surface fastener pops.

Key Performance & Safety Features

• Hot-Dipped Galvanized (HDG) Zinc Barrier: Heavy molten zinc coating provides sacrificial corrosion defense specifically approved for use in pressure-treated lumber.
• High-Holding Power Ring Shank: Annular ridges act like locking barbs to wedge into timber fibers, maximizing resistance against wood cupping and load withdrawal.
• Full Round Head (FRH) Geometry: Delivers maximum surface contact area for high pull-through resistance and strict structural building code compliance.
• 21-Degree Plastic Strip Collation: Precision-angled collation strips feed smoothly into standard 21-degree pneumatic framing nailers and shatter cleanly upon drive.
• Industrial 6d Standard Sizing: 2-inch length and 0.113-inch shank diameter meet standard structural specifications for wood-to-wood structural connections.
• Bulk 2,000-Piece Contractor Box: Packed in a 2M quantity box to maintain continuous job site productivity with fewer magazine reloads.

What's Included

• (2,000) 1 Top Tools 2" x 0.113" 6d 21-Degree Hot-Dipped Galvanized Ring Shank Collated Framing Nails

Technical Specifications

Pro-Tip: When driving these 6d 2-inch HDG nails into pressure-treated decking joists or wet dimensional lumber, set your pneumatic nailer operating pressure to approximately 90–100 PSI so the full round head drives perfectly flush. Flush driving leaves the protective zinc layer intact over the head face, preventing localized moisture traps and ensuring maximum corrosion resistance in exterior wood joints.