1 Top Tools Framing Nails P21113HDG 2 In x 0.113 In (2000 Count Ring Shank HDG Steel 21 Degree Collated Deck Fencing Fastener)

High-Performance 2 Inch x 0.113 Inch 21 Degree Collated HDG Ring Shank Framing Nails 2000 Count

The 1 Top Tools 2-Inch x 0.113-Inch Hot-Dipped Galvanized Ring Shank Framing Nails function as commercial-grade collated pneumatic fasteners engineered to deliver high corrosion resistance and maximum withdrawal power when securing pressure-treated lumber, exterior decking, and perimeter fencing. Formulated from high-tensile carbon steel encapsulated in a molten Hot-Dipped Galvanized (HDG) protective zinc barrier, these 21-degree plastic-strip collated nails feature annular ring shank threads that interlock with wood fibers to prevent nail-pop and board squeaking. Incorporating a 0.113-inch (11 Gauge) shank diameter, diamond point tip, and full round head profile for high pull-through resistance, the 2,000-count fastener bulk box ensures consistent jam-free feeding across high-volume pneumatic framing passes.

Best Used For:

• Pressure-Treated Decking & Sub-Structures: Fastening pressure-treated deck joists, ledger boards, and decking planks exposed to high ground moisture.
• Exterior Fencing & Wood Siding Installation: Securing cedar, redwood, and pressure-treated fence pickets and siding panels without creating rust bleed streaks.
• Post-Frame & Pole Barn Construction: Attaching wall girts, roof purlins, and exterior shear panel sheathing exposed to harsh weather conditions.

Key Performance & Safety Features

• Hot-Dipped Galvanized (HDG) Zinc Barrier: Heavy molten zinc coating provides long-lasting corrosion defense against chemicals in pressure-treated lumber.
• High-Holding Power Ring Shank: Annular ridges act like locking barbs to wedge into timber fibers, maximizing resistance against wood cupping and withdrawal.
• Full Round Head (FRH) Geometry: Delivers maximum surface contact area for high pull-through resistance and strict structural building code compliance.
• 21-Degree Plastic Strip Collation: Precision-angled collation strips feed smoothly into 21-degree pneumatic framing nailers and shatter cleanly upon drive.
• Industrial 11-Gauge Carbon Steel Wire: Heavy-duty 0.113-inch carbon steel wire resists shank bending during rapid driving into dense wet framing lumber.
• Bulk 2,000-Piece Contractor Box: Packed in a 2M quantity box to maintain continuous job site productivity with fewer magazine reloads.

What's Included

• (2,000) 1 Top Tools 2" x 0.113" 21-Degree Hot-Dipped Galvanized Ring Shank Collated Framing Nails

Technical Specifications

Pro-Tip: When installing exterior pressure-treated deck boards or cedar fence rails with these 2-inch HDG ring shank nails, calibrate your pneumatic framing nailer air pressure to drive the full round head flush with the wood surface. Avoid countersinking past the face layer, as over-driving can crush the protective zinc coating and allow standing rainwater to collect in the nail hole.