1 Top Tools Framing Nails P21113HDGR314 3-1/4 In x 0.113 In 12d (2000 Count HDG Ring Shank Steel 21 Degree Collated Pressure Treated Deck Fastener)

Industrial-Grade 3-1/4 Inch x 0.113 Inch 12d 21 Degree Collated HDG Ring Shank Framing Nails 2000 Count

The 1 Top Tools 3-1/4-Inch x 0.113-Inch (12d Size) Hot-Dipped Galvanized Ring Shank Framing Nails function as commercial-grade collated pneumatic fasteners engineered to execute high-durability exterior timber framing, pressure-treated decking assembly, and perimeter fencing installation. Formulated from high-tensile carbon steel encapsulated in a thick Hot-Dipped Galvanized (HDG) molten zinc protective barrier meeting ASTM F1667 standards, these 21-degree plastic-strip collated nails feature annular ring shanks that interlock directly with wood fibers to prevent fastener backing-out and board squeaking over time. Incorporating a 0.113-inch (12 Gauge) shank diameter, precision diamond point tip, and full round head profile for high pull-through resistance, the 2,000-count fastener bulk pack maintains rapid jam-free feeding across continuous pneumatic framing passes in outdoor high-moisture environments.

Best Used For:

• Pressure-Treated Deck Framing & Sub-Structures: Fastening pressure-treated ACQ deck joists, ledger boards, and decking substructures exposed to high ground moisture and chemical preservatives.
• Exterior Cedar & Redwood Fencing: Securing cedar pickets, redwood fence rails, and outdoor timber panels without creating rust bleed streaks or surface fastener pops.
• Outdoor Wall Framing & Structural Sheathing: Attaching exterior plywood wall sheathing, shear panels, subfloors, and roof decking exposed to humid weathering conditions.

Key Performance & Safety Features

• ASTM F1667 Certified HDG Zinc Barrier: Heavy molten zinc coating provides sacrificial corrosion defense specifically approved for use in pressure-treated lumber.
• High-Holding Power Ring Shank: Annular ridges act like locking barbs to wedge into timber fibers, maximizing resistance against wood cupping and load withdrawal.
• Full Round Head (FRH) Geometry: Delivers maximum surface contact area for high pull-through resistance and strict structural building code compliance.
• 21-Degree Plastic Strip Collation: Precision-angled collation strips feed smoothly into standard 20-degree to 22-degree pneumatic framing nailers and shatter cleanly upon driver impact.
• Standard 12d Industrial Sizing: 3-1/4-inch length and 0.113-inch diameter meet standard structural specs for exterior wood-to-wood framing connections.
• Bulk 2,000-Piece Contractor Box: Packed in a 2M quantity box to maintain continuous job site productivity with fewer magazine reloads.

What's Included

• (2,000) 1 Top Tools 3-1/4" x 0.113" 12d 21-Degree Hot-Dipped Galvanized Ring Shank Collated Framing Nails

Technical Specifications

Pro-Tip: When installing tongue-and-groove decking or exterior wall sheathing panels using these 12d 3-1/4-inch ASTM F1667 HDG ring shank nails, calibrate your 21-degree pneumatic nailer pressure to approximately 90–100 PSI. Driving the full round head perfectly flush leaves the thick protective zinc barrier intact over the nail head, preventing standing rainwater from degrading the steel core inside pressure-treated lumber joints.