Spotnails Roofing Nails CRN10G 1-1/4 Inch 11 Gauge 7200 Count (Electro Galvanized 15 Degree Wire Coil Asphalt Shingle Siding Pneumatic Fastener)
Couldn't load pickup availability
Spotnails CRN10G 1-1/4-Inch 11-Gauge Electro-Galvanized Coil Roofing Nails (7,200-Count Master Pack)
The Spotnails CRN10G 1-1/4-Inch 11-Gauge Galvanized Coil Roofing Nails fasten fiberglass asphalt shingles, synthetic underlayment, waterproof tar felt, rigid foam insulation, and exterior siding panels across residential and commercial roof decks. Manufactured from high-tensile 0.120-inch steel wire with an electro-galvanized zinc coating, each fastener delivers high pull-through shear resistance and exterior corrosion protection against harsh weather cycles. Engineered with a universal 15-degree conical wire collation in high-volume coils, these nails feed smoothly at production speeds through all standard pneumatic coil roofing nailers without jamming or strip fragmentation.
Best Used For:
- Asphalt & Architectural Shingle Installation: Securing 3-tab and dimensional asphalt shingles to 1/2-inch and 5/8-inch OSB or plywood roof decking with high wind-uplift resistance.
- Roof Underlayment & Vapor Barrier Attachment: Fastening asphalt-saturated tar felt, ice-and-water shield membranes, and synthetic sheets tightly to sheathing without tearing substrate fibers.
- Exterior Siding & Sheathing Fastening: Pinning fiber cement siding backer strips, cedar shakes, and structural wall sheathing boards in high-volume production siding work.
Key Performance & Safety Features
- Electro-Galvanized Zinc Finish: Shields high-strength carbon steel wire from oxidation, rust staining, and acidic moisture exposure on exterior roofs.
- Heavy-Duty 11-Gauge (0.120") Shank: Thick structural wire diameter provides severe shear strength and prevents fastener bending during rapid bump-fire cycling.
- Universal 15-Degree Wire Collation: Precision copper-coated welding wire collation feeds smoothly across all major brand pneumatic coil roofing tools.
- Full Round Head Design: Wide umbrella head profile seats flush over shingle nailing lines to maximize pull-through resistance during high-wind storms.
- Diamond Chisel Point: Pierces multiple roofing layers, ice barriers, and dense wood decking cleanly without splitting framing lumber.
- 7,200-Count Contractor Pack: Supplies high-volume roofing crews with continuous fastener inventory to minimize reloading trips on steep pitches.
What's Included
- (1) Master Carton of 7,200 Spotnails CRN10G 1-1/4" Galvanized 15° Coil Roofing Nails (60 Coils of 120 Nails)
Technical Specifications
| Specification | Detail |
|---|---|
| Model Number | CRN10G |
| Fastener Length | 1.25 in (1-1/4 in / 31.75 mm) |
| Wire Shank Diameter | 0.120 in (11 Gauge) |
| Collation Angle | 15 Degree Conical |
| Collation Material | Copper-Coated Steel Wire Weld |
| Fastener Head Type | Full Round Head (Umbrella Roofing Head) |
| Shank Profile | Smooth Shank |
| Point Style | Diamond Penetration Point |
| Corrosion Protection Finish | Electro-Galvanized Zinc Plating |
| Package Quantity | 7,200 Count (Coiled) |
| Tool Machine Compatibility | All Standard 15° Pneumatic Coil Roofing Nailers |
| Substrate Suitability | Asphalt Shingles, Tar Paper, Synthetic Underlayment, Siding, OSB, Plywood |
Pro-Tip: Adjust your air compressor regulator to 90 PSI and adjust your roofing nailer nose depth so the full round head rests completely flat against the shingle line without cutting into the mineral surface layer.