The Bosch 11335K 1-1/8 inch hex breaker hammer with an installed star point chisel, showing its blue and silver industrial design and articulating handle.
The Bosch breaker hammer kit components, including the 15-amp demolition hammer and its heavy-duty blue carrying case with integrated wheels.
A feature callout diagram for the Bosch 11335K, highlighting the Service Minderbrush system, Vibration Control, power-to-weight ratio, all-metal housing, 360-degree auxiliary handle, and two-way bit retention.
A close-up view of the auxiliary handle mounting area on the breaker hammer, featuring the red Vibration Control label.
A person's hand holding the top handle of the breaker hammer, with motion graphics illustrating the shock-reducing movement of the Vibration Control system.
Close-up of a gloved hand sliding the red on/off switch located on top of the Bosch breaker hammer's housing.
Detailed view of the large, heavy-duty black wheel on the base of the blue carrying case for easy transportation.
Rear profile view of the Bosch breaker hammer showing the power cord connection and the slim, balanced in-line design.
Side profile view of the demolition hammer highlighting the 360-degree articulating auxiliary handle and the tool retainer mechanism.
An informational graphic stating Available Modes with a Hammer icon and the text Hammer Only, indicating the tool's dedicated demolition function.
The Bosch 11335K breaker hammer standing upright in a pile of demolished concrete debris at a construction site.
A person using the Bosch breaker hammer with a dust extraction attachment to demolish a concrete floor in an indoor garage.
The Bosch 11335K 1-1/8 inch hex breaker hammer with an installed star point chisel, showing its blue and silver industrial design and articulating handle.
The Bosch breaker hammer kit components, including the 15-amp demolition hammer and its heavy-duty blue carrying case with integrated wheels.
A feature callout diagram for the Bosch 11335K, highlighting the Service Minderbrush system, Vibration Control, power-to-weight ratio, all-metal housing, 360-degree auxiliary handle, and two-way bit retention.
A close-up view of the auxiliary handle mounting area on the breaker hammer, featuring the red Vibration Control label.
A person's hand holding the top handle of the breaker hammer, with motion graphics illustrating the shock-reducing movement of the Vibration Control system.
Close-up of a gloved hand sliding the red on/off switch located on top of the Bosch breaker hammer's housing.
Detailed view of the large, heavy-duty black wheel on the base of the blue carrying case for easy transportation.
Rear profile view of the Bosch breaker hammer showing the power cord connection and the slim, balanced in-line design.
Side profile view of the demolition hammer highlighting the 360-degree articulating auxiliary handle and the tool retainer mechanism.
An informational graphic stating Available Modes with a Hammer icon and the text Hammer Only, indicating the tool's dedicated demolition function.
The Bosch 11335K breaker hammer standing upright in a pile of demolished concrete debris at a construction site.
A person using the Bosch breaker hammer with a dust extraction attachment to demolish a concrete floor in an indoor garage.
BOSCH

Bosch Breaker Hammer 11335K 1-1/8 Inch Hex 15 Amp Corded Concrete Electric Jack Demolition (22 Ft Lbs Impact Energy Vibration Control Wheel Case Kit)

In stock
SKU: 11335K
$1,099.00 USD

Description

Bosch Promtional Logo Logout

Contractor-Grade 15.0 Amp 1-1/8 Inch Hex Electric Jackhammer Matrix with 22 Ft.-Lbs. Impact Force and Integrated Vibration Control

The Bosch 11335K 15 Amp 1-1/8 Inch Hex Corded Concrete Electric Breaker Hammer Kit delivers specialized structural demolition utility and exceptional material fracture efficiency across demanding flatwork and foundation removal sites. Engineered with a heavy-duty 15.0-amp electrical motor profile driving a percussive 1,300 blows per minute (BPM) tracking scale, this high-performance jackhammer maintains an elite material removal rate while keeping hardware mass confined to a balanced 38 lbs. This professional contractor solution resolves severe operator muscle strain from oscillating tool shock pathways, sudden field motor burnouts, and loose chisel retention complications by combining a dual-stage Vibration Control internal air cushion with an automated Service Minderbrush diagnostic cutoff and a versatile two-way steel retention jaw array. Outfitted with an all-metal protective shroud casing, a grease-packed structural gearbox, a 360-degree articulating auxiliary side grip handle, and a wheeled mobile storage carrier, this robust demolition system optimizes subcontractor field production loops during commercial asphalt pavement sectioning, indoor slab structural truing, and heavy concrete footing breakouts.

Best Used For:

  • Commercial Pavement Demolition: Fracturing deep outdoor asphalt vehicle lanes and structural parking lot sub-bases uniformly prior to trenching procedures.
  • Indoor Foundation Remediation: Breaking down structural concrete floor pads, elevator pits, and dense retaining basin footings inside tight building perimeters single-handedly.
  • Heavy Trenching Utility Prep: Chipping through frost layers, compacted rock formations, and hard clay zones to clear paths for commercial plumbing drain line paths.

Key Performance & Safety Features

  • Vibration Control Engine: Extended internal air chamber cushions physical strike recoil metrics while the shock-isolated handle reduces long-term physical joint strain.
  • Service Minderbrush Isolation: Smart internal sensor array tracks brush degradation levels and cuts active electrical pathways automatically when field maintenance is required.
  • Two-Way Bit Lock Collar: Versatile socket receiver accommodates standard 1-1/8 inch hex steel profiles, collared air tools, or internal-locking combination demolition points.
  • All-Metal Body Casting: Ruggedized aluminum and tube steel layout armor resists severe job site drop failures and harsh industrial aggregate impacts.
  • Mobile Transport Engineering: Heavy-duty blow-molded carrying trunk features integrated rollers to facilitate seamless equipment tracking across active structural layouts.

What's Included

  • (1) 11335 Jack 35-Lb. Electric Breaker Hammer Unit
  • (1) HS2861 SDS-Hex Star Point Demolition Chisel
  • (1) 360-Degree Articulating Side Auxiliary Grip Handle
  • (1) High-Performance Gear Lubricant Grease Tube
  • (1) Rugged Protective Carrying Case with Integrated Wheels

Technical Specifications

Specification Value
Brand Name Bosch
Model Number 11335K
Product Classification Type Corded Electric Breaker Jack Hammer Kit
Current Amperage Draw 15.0 Amps
Input Voltage Grid 120V AC Standard Power Line
Percussive Strike Frequency 1,300 Blows Per Minute (BPM)
Kinetic Impact Energy Rating 22 ft.-lbs. Force Output
Tool Chuck Configuration 1-1/8 in. Hex System (Two-Way Retention)
Total Chassis Assembly Length 30 in.
Total Chassis Assembly Width 13 in.
Total Chassis Assembly Height 5 in.
Net Hardware Unit Weight 38 lbs.
Total Kit Shipping Weight 58 lbs.

Pro-Tip: Never use the internal percussive piston to manually pry cracked chunks of structural concrete loose like a crowbar. Forcing structural side load tracking angles onto the tool while the piston fires at 1,300 BPM causes internal barrel misalignment errors and scoring along the main motor housing components.