Bosch Demolition Hammer BH2760VCB 1-1/8 Inch Hex Brute Breaker Kit (15 Amp 120V 35 Ft-Lbs Impact Energy 1000 BPM Concrete Removal Slab Breaking)

Bosch BH2760VCB Brute 15 Amp 1-1/8 Inch Hex Concrete Breaker Demolition Hammer Kit

The Bosch BH2760VCB Brute 15 Amp 1-1/8 Inch Hex Concrete Breaker Demolition Hammer Kit is a heavy-duty electric jackhammer system engineered for high-volume reinforced concrete slab removal, foundation demolition, and utility trenching. Driven by a 15.0 Amp motor generating 35 ft-lbs of EPTA impact energy at 1,000 impacts per minute, this corded breaker operates on standard 120V AC/DC electrical outlets or 2,500-watt jobsite generators without requiring tow-behind air compressors. Outfitted with Active Vibration Control shock-absorbing handles, a grease-packed maintenance-free drive mechanism, and a Service MinderBrush automatic shut-off system, this 63.2-pound portable unit maintains high fracturing performance across tough masonry substrates.

Best Used For:

• Reinforced Concrete Slab & Driveway Breaking: Fracturing thick reinforced concrete driveways, poured patio slabs, and building foundations rapidly.
• Utility Trenching & Asphalt Removal: Slicing asphalt street surfaces, opening underground utility trenches, and breaking frozen earth for pipe installation.
• Heavy Wall & Foundation Pier Demolition: Knocking down poured concrete basement walls, brick masonry structures, and reinforced footing piers.

Key Performance & Safety Features

• 15.0 Amp High-Output Electric Motor: Delivers 35 ft-lbs of impact energy to match pneumatic breaker performance without towing tow-behind compressors.
• Active Vibration Control System: Internal counter-balance mechanism and rubber-decoupled shock-absorbing handles reduce felt vibration to lower fatigue.
• Service MinderBrush Protection: Automatically shuts down electrical power when carbon brushes require replacement to safeguard internal armatures.
• Grease-Packed Drive Gearbox: Sealed lubrication system eliminates daily jobsite greasing routines and protects internal hammer components.
• 1-1/8 Inch Hex Anvil System: Accepts standard 1-1/8-inch hex notch steels and air-tool steel chisels for maximum collateral torque transfer.
• 120V AC/DC Power Flexibility: Operates efficiently on standard 15A/20A electrical branch circuits or portable 2,500W generators.

What's Included

• (1) BH2760VC Brute 1-1/8 In. Hex Breaker Hammer
• (1) HS2163 Narrow Flat Chisel (1-1/8 In. Hex)
• (1) HS2161 Moil Point Chisel (1-1/8 In. Hex)
• (1) T1657 Basic Hammer Transport Cart

Technical Specifications

Pro-Tip: Allow the weight of the 63-pound breaker to do the heavy fracturing; avoid applying excessive body weight force down on the handles to maximize the damping efficiency of the Active Vibration Control system.