The complete Bosch GXL18V-291B25 2-tool combo kit, showing the screwgun, cut-out tool, two CORE18V 4.0Ah batteries, charger, bits, collets, and the blue Bosch carrying bag.
An informational graphic of the Bosch GCU18V-30 cut-out tool with callouts pointing to key features: "DUST HOOD," "ADJUSTABLE FOOT PLATE," "CONVENIENCE BRAKE," "LED LIGHT," "DUST-RESISTANT SWITCH," and "BRUSHLESS MOTOR."
An informational graphic of the Bosch GTB18V-45 screwgun with callouts pointing to its key features: "XTEND DRIVE," "BRUSHLESS MOTOR," "REVERSIBLE DEPTH GAUGE," "BALANCED GRIP," and "BELT CLIP."
The complete Bosch GXL18V-291B25 2-tool combo kit, showing the screwgun, cut-out tool, two CORE18V 4.0Ah batteries, charger, bits, collets, and the blue Bosch carrying bag.
A side profile studio shot of the Bosch GTB18V-45 brushless screwgun (bare tool) highlighting the belt clip side.
A detailed close-up of the adjustable depth gauge and cone on the front of the Bosch GTB18V-45 screwgun.
A three-quarter studio shot of the Bosch GCU18V-30 brushless cut-out tool with a CORE18V 4.0Ah battery attached and the clear dust hood in place.
A side profile studio shot of the Bosch GCU18V-30 brushless cut-out tool (bare tool) with the clear dust hood attached.
A close-up view of the red power switch, "BRUSHLESS MOTOR" label, and collet on the Bosch GCU18V-30 cut-out tool.
The complete Bosch GXL18V-291B25 2-tool combo kit, showing the screwgun, cut-out tool, two CORE18V 4.0Ah batteries, charger, bits, collets, and the blue Bosch carrying bag.
A person holds the Bosch GTB18V-45 screwgun and uses it to drive a screw into a sheet of drywall attached to wooden studs.
A person uses the Bosch GCU18V-30 brushless cut-out tool to cut a hole in a sheet of drywall, with the tool's LED light illuminating the cut line.
The Bosch GTB18V-45 screwgun and GCU18V-30 cut-out tool are shown standing on a piece of drywall on a workbench, with drywall screws scattered nearby and a wood-framed wall in the background.
The complete Bosch GXL18V-291B25 2-tool combo kit, showing the screwgun, cut-out tool, two CORE18V 4.0Ah batteries, charger, bits, collets, and the blue Bosch carrying bag.
An informational graphic of the Bosch GCU18V-30 cut-out tool with callouts pointing to key features: "DUST HOOD," "ADJUSTABLE FOOT PLATE," "CONVENIENCE BRAKE," "LED LIGHT," "DUST-RESISTANT SWITCH," and "BRUSHLESS MOTOR."
An informational graphic of the Bosch GTB18V-45 screwgun with callouts pointing to its key features: "XTEND DRIVE," "BRUSHLESS MOTOR," "REVERSIBLE DEPTH GAUGE," "BALANCED GRIP," and "BELT CLIP."
The complete Bosch GXL18V-291B25 2-tool combo kit, showing the screwgun, cut-out tool, two CORE18V 4.0Ah batteries, charger, bits, collets, and the blue Bosch carrying bag.
A side profile studio shot of the Bosch GTB18V-45 brushless screwgun (bare tool) highlighting the belt clip side.
A detailed close-up of the adjustable depth gauge and cone on the front of the Bosch GTB18V-45 screwgun.
A three-quarter studio shot of the Bosch GCU18V-30 brushless cut-out tool with a CORE18V 4.0Ah battery attached and the clear dust hood in place.
A side profile studio shot of the Bosch GCU18V-30 brushless cut-out tool (bare tool) with the clear dust hood attached.
A close-up view of the red power switch, "BRUSHLESS MOTOR" label, and collet on the Bosch GCU18V-30 cut-out tool.
The complete Bosch GXL18V-291B25 2-tool combo kit, showing the screwgun, cut-out tool, two CORE18V 4.0Ah batteries, charger, bits, collets, and the blue Bosch carrying bag.
A person holds the Bosch GTB18V-45 screwgun and uses it to drive a screw into a sheet of drywall attached to wooden studs.
A person uses the Bosch GCU18V-30 brushless cut-out tool to cut a hole in a sheet of drywall, with the tool's LED light illuminating the cut line.
The Bosch GTB18V-45 screwgun and GCU18V-30 cut-out tool are shown standing on a piece of drywall on a workbench, with drywall screws scattered nearby and a wood-framed wall in the background.
BOSCH

Bosch Drywall Tool Kit GXL18V-291B25 1/4 Inch Hex Screwgun Cutout Set (XTEND DRIVE 30000 RPM Dual 4.0Ah CORE18V Battery Charger Sheetrock Hanging)

In stock
SKU: GXL18V-291B25
$495.00 USD

Description

Bosch Promotional Logo Logout

Bosch GXL18V-291B25 18V Brushless 2-Tool Drywall Combo Kit with (2) CORE18V 4.0Ah Batteries

The Bosch GXL18V-291B25 18V brushless 2-tool cordless drywall combo kit fastens sheetrock panels and routs electrical junction box openings with high-efficiency motor architecture and intelligent power management. Featuring the GTB18V-45 1/4-inch hex screwgun with XTEND DRIVE™ technology, the motor activates only upon bit pressure to drive over 2,000 drywall screws per charge on a single 4.0Ah battery while minimizing jobsite noise. Paired with the GCU18V-30 cut-out tool delivering 30,000 RPM to cut up to 300 linear feet per charge, two CORE18V 4.0Ah advanced power batteries, and an 18V charger, this AMPShare™ compatible package equips commercial drywall contractors, acoustic ceiling installers, and residential framers with rapid hanging and trimming efficiency.

Best Used For:

  • High-Volume Drywall and Sheetrock Hanging: Driving collated or loose drywall fasteners into wood studs and light-gauge steel framing with pressure-activated auto-start functionality.
  • Electrical Outlet and HVAC Opening Cutouts: Plunge routing clean rectangular and circular openings around electrical junction boxes, recessed lighting fixtures, and duct registers.
  • Acoustical Tile and Wallboard Trimming: Slicing window returns, door jamb reliefs, and custom architectural wallboard curves with high-speed 30,000 RPM precision.

Key Performance & Safety Features

  • XTEND DRIVE™ Intelligent Activation: Senses bit pressure to start the screwgun motor automatically, extending battery runtime to over 2,000 screws per charge.
  • High-Speed 4,500 RPM Screwgun: High-efficiency brushless motor rapidly drives standard and coarse-thread drywall screws to precise depths with a toolless nosecone.
  • 30,000 RPM Cut-Out Motor: Delivers corded-equivalent cutting speed capable of routing up to 300 linear feet of 1/2-inch gypsum board on a single battery.
  • IP5X Dust-Resistant Switch & Brake: Sealed switch prevents gypsum dust ingress while an integrated motor brake stops bit rotation rapidly for jobsite safety.
  • CORE18V 4.0Ah High-Density Power: Advanced cell technology provides twice the runtime of standard 2.0Ah batteries with optimized heat management.
  • AMPShare™ System Compatibility: Operates seamlessly across the multi-brand cordless alliance battery platform for streamlined jobsite power management.

What's Included

  • (1) Bosch GTB18V-45 18V Brushless 1/4" Hex Drywall Screwgun
  • (1) Bosch GCU18V-30 18V Brushless Cut-Out Tool
  • (2) Bosch GBA18V40 CORE18V® 18V 4.0Ah Advanced Power Lithium-Ion Batteries
  • (1) Bosch 18V Lithium-Ion Battery Charger
  • (1) 1/8" Collet
  • (1) 1/4" Collet
  • (1) 5/32" Collet
  • (2) 1/8" Drywall Guide-Point Cutting Bits
  • (1) Screwdriver Bit
  • (1) Magnetic Bit Holder
  • (2) Heavy-Duty Belt Clips
  • (1) Heavy-Duty Contractor Carrying Bag

Technical Specifications

Manufacturer Brand Bosch Power Tools (Robert Bosch Tool Corporation)
Model Part Number GXL18V-291B25
Product Category Class 18V Cordless 2-Tool Drywall Combo Kit
System Nominal Voltage 18 Volts DC (AMPShare™ Platform Compatible)
Screwgun Maximum Speed 0 - 4,500 RPM (Revolutions Per Minute)
Screwgun Chuck Interface 0.250 Inches (1/4 in. Quick-Change Hex Drive)
Cut-Out Tool Maximum Speed 30,000 RPM No-Load Operating Speed
Cut-Out Collet Capacities 0.125 in., 0.156 in., 0.250 in. (1/8", 5/32", 1/4" Included)
Cut-Out Tool IP Ingress Rating IP5X Dust-Protected Sealed Power Switch
Batteries Included in Kit (2) GBA18V40 CORE18V® 4.0Ah Lithium-Ion Packs
Battery Charger Included Bosch 18V Fast Lithium-Ion Charger Included
Total Assembled Kit Weight 10.50 lbs (168.00 oz / 4.76 kg)
Storage Packaging Type Heavy-Duty Fabric Contractor Tool Bag
Suitable for material type Gypsum Drywall, Sheetrock, Wood Studs, & Light-Gauge Steel

Pro-Tip: Enable the XTEND DRIVE™ lock-on feature on the screwgun when hanging ceilings; the motor remains silent between fasteners and spins up automatically the instant you push against the stud, saving battery and arm strain.