Studio view of the 7/16 inch Daredevil spade bit featuring a blue paddle, full-cone threaded tip, and hex shank.
Infographic diagram detailing features including the self-feeding threaded tip, speedwave paddle for chip removal, and hex shank with power groove.
Angled close-up view of the spade bit tip highlighting the threaded cone and spur scoring cutters on the blue paddle.
Graphic titled Best For displaying a cross-section of a tree log labeled Wood to indicate the primary application material.
Action shot of a person using a cordless drill to bore a hole overhead into wooden framing with the spade bit.
Close-up action shot of the blue spade bit boring a hole through wood with chips being ejected by the contoured paddle.
Close-up action shot of a blue spade bit boring a hole through a wooden stud showing the size marking 1 1/8 on the paddle.
Close-up action shot of the spade bit boring through a wooden stud, demonstrating the clean exit hole capability.
Low angle view of a blue spade bit secured in the chuck of a cordless impact driver with a blurred construction background.
Action shot of a cordless impact driver driving a fastener into a wooden stud demonstrating the tool platform compatibility.
Studio view of the 7/16 inch Daredevil spade bit featuring a blue paddle, full-cone threaded tip, and hex shank.
Infographic diagram detailing features including the self-feeding threaded tip, speedwave paddle for chip removal, and hex shank with power groove.
Angled close-up view of the spade bit tip highlighting the threaded cone and spur scoring cutters on the blue paddle.
Graphic titled Best For displaying a cross-section of a tree log labeled Wood to indicate the primary application material.
Action shot of a person using a cordless drill to bore a hole overhead into wooden framing with the spade bit.
Close-up action shot of the blue spade bit boring a hole through wood with chips being ejected by the contoured paddle.
Close-up action shot of a blue spade bit boring a hole through a wooden stud showing the size marking 1 1/8 on the paddle.
Close-up action shot of the spade bit boring through a wooden stud, demonstrating the clean exit hole capability.
Low angle view of a blue spade bit secured in the chuck of a cordless impact driver with a blurred construction background.
Action shot of a cordless impact driver driving a fastener into a wooden stud demonstrating the tool platform compatibility.
BOSCH

Bosch Spade Drill Bit Set DSB1004 5 Piece 7/16 Inch Daredevil Wood Boring Paddle Tool Pack 6 Inch Length 1/4 Hex Shank Self Feeding For Studs

In stock
SKU: DSB1004
$3.29 USD

Description

Bosch Promtional Logo Logout

High-Speed Self-Feeding Spade Bit Assortment for Fast Mechanical and Electrical Rough-Ins

The Bosch DSB1004 Daredevil Spade Drill Bit Set is a 5-piece wood-boring kit containing 7/16-inch diameter by 6-inch length paddle tools engineered to execute fast penetrations through structural framing lumber up to 10 times faster than standard alternatives. An aggressive full-cone threaded tip continuously self-feeds through wood fibers, minimizing manual downforce requirements while dampening operational tool vibration. The patented contoured wave paddle geometry optimizes high-speed chip evacuation to prevent thermal binding and friction stalls within deep 5-inch drilling depths. Equipped with a universal 1/4-inch hex shank and safety power groove, these high-carbon steel bits provide a slip-free mechanical anchor inside modern impact drivers and standard drill chucks.

Best Used For:

  • Electrical Wiring Paths: Boring multiple clean 7/16-inch utility channels through structural studs and framing plates for small-gauge cables.
  • Control Line Installation: Fabricating accurate clearance paths through floor joists and partitions for HVAC control wiring or thermostat lines.
  • General Carpentry Layouts: Creating crisp, splinter-free entry and exit penetrations in structural pine, plywood, and softwoods.

Key Performance & Safety Features

  • Full-Cone Threaded Tip: Aggressively self-feeds the tool into wood substrates for rapid, high-speed drilling with minimal physical pressure.
  • Spur and Reamer Geometry: Scores wood fibers along the outer perimeter first, yielding clean exits with reduced breakthrough splintering.
  • Contoured Paddle Profile: Engineered wave design forces wood chips away from the cutting path instantly to eliminate boring stalls.
  • Hex Shank Power Groove: Fixed 1/4-inch hex configuration provides slip-free torque transfer and rapid-change utility in impactors.
  • High Carbon Steel Composition: Premium tool steel matrix preserves tooth sharpness and extends structural life during rigorous industrial use.

What's Included

  • (5) 7/16 In. x 6 In. Daredevil™ Spade Drill Bits

Technical Specifications

Brand Bosch
Model Number DSB1004
Product Type Spade Bit Set / Paddle Bit Kit
Bit Diameter 7/16 in.
Overall Length 6 in.
Drilling Depth 5 in.
Shank Diameter 1/4 in.
Shank Type Hex with Power Groove
Material High Carbon Steel
Self Feeding Yes
Number of Pieces 5
Country of Origin China
Pack Weight 0.4 lbs

Pro-Tip: Because this bit is self-feeding, maintain a firm, balanced grip on your drill driver. Let the threaded cone lead the tool through the wood, maintaining a straight approach angle to prevent structural binding.