Front view of the Bosch DH1020VC inline SDS-Max demolition hammer, highlighting its large main handle, auxiliary handle, and robust housing.
Front view of the Bosch DH1020VC inline SDS-Max demolition hammer, highlighting its large main handle, auxiliary handle, and robust housing.
Annotated diagram of the Bosch DH1020VC demolition hammer, with labels pointing to features like variable speed dial, in-line design, vibration control system, SDS-Max chuck, best-in-class impact energy, service minder brushes, constant response circuitry, and Vario-Lock positioning.
Front view of the Bosch DH1020VC inline SDS-Max demolition hammer, highlighting its large main handle, auxiliary handle, and robust housing.
Side view of the Bosch DH1020VC inline SDS-Max demolition hammer, showing the main handle, auxiliary handle, SDS-Max chuck, and cord.
A construction worker in full PPE (hard hat, ear protection, safety glasses, mask) operates the Bosch DH1020VC demolition hammer, breaking concrete off the edge of an elevated structure.
A construction worker wearing gloves and work clothes uses the Bosch DH1020VC inline SDS-Max demolition hammer to chisel a concrete floor indoors.
Bosch DH1020VC SDS-Max Demolition Hammer with 15 Amp motor and vibration control for heavy concrete breaking tasks
Front view of the Bosch DH1020VC inline SDS-Max demolition hammer, highlighting its large main handle, auxiliary handle, and robust housing.
Front view of the Bosch DH1020VC inline SDS-Max demolition hammer, highlighting its large main handle, auxiliary handle, and robust housing.
Annotated diagram of the Bosch DH1020VC demolition hammer, with labels pointing to features like variable speed dial, in-line design, vibration control system, SDS-Max chuck, best-in-class impact energy, service minder brushes, constant response circuitry, and Vario-Lock positioning.
Front view of the Bosch DH1020VC inline SDS-Max demolition hammer, highlighting its large main handle, auxiliary handle, and robust housing.
Side view of the Bosch DH1020VC inline SDS-Max demolition hammer, showing the main handle, auxiliary handle, SDS-Max chuck, and cord.
A construction worker in full PPE (hard hat, ear protection, safety glasses, mask) operates the Bosch DH1020VC demolition hammer, breaking concrete off the edge of an elevated structure.
A construction worker wearing gloves and work clothes uses the Bosch DH1020VC inline SDS-Max demolition hammer to chisel a concrete floor indoors.
Bosch DH1020VC SDS-Max Demolition Hammer with 15 Amp motor and vibration control for heavy concrete breaking tasks
BOSCH

Bosch Demolition Hammer DH1020VC SDS-Max Inline Breaker Gun (17.0 Ft Lbs Impact Energy 15A Motor Vibration Control Vario-Lock 120V Case Tool)

In stock
SKU: DH1020VC
$1,205.00 USD

Description

Bosch Promotional Logo Logout

Bosch DH1020VC 15-Amp SDS-Max Inline Demolition Breaker Hammer

The Bosch DH1020VC 15-amp SDS-Max corded inline demolition hammer generates 17.0 ft-lbs of impact energy to fracture heavy concrete foundation slabs, break structural masonry walls, cut asphalt channels, and scale tough mortar beds. Driven by an industrial 120V electric motor paired with Constant Response circuitry, this 25.1-lb chipping gun maintains continuous striking power under severe resistance while dampening mechanical kickback via active internal Vibration Control air cushions. Outfitted with an elongated inline chassis for balanced horizontal and vertical chiseling, an adjustable variable-speed dial delivering 900 to 1,700 BPM, a 12-position Vario-Lock chuck collar, and a Service Minder maintenance monitor, it delivers pinpoint impact control and structural demolition power across heavy commercial jobsites.

Best Used For:

  • Horizontal Wall and Masonry Beam Demolition: Knocking out reinforced cinder block partitions, structural brick walls, and concrete window headers with balanced inline leverage.
  • Foundation Slab and Trench Concrete Breaking: Fracturing 4-inch to 8-inch cured concrete slabs, utility footings, and pavement pads during deep plumbing pipe channel trenching.
  • Surface Scaling and Floor Tile Removal: Peeling commercial quarry tiles, hardened thin-set mortar, and concrete spatter without shattering underlying subfloors by dialing down strike force.

Key Performance & Safety Features

  • 17.0 Ft-Lbs Impact Force: High-efficiency electro-pneumatic drive mechanism delivers class-leading fracturing energy for rapid stock removal in cured high-PSI aggregate.
  • 15.0-Amp Industrial Motor: Heavy-duty corded electric power plant supplies continuous driving force for severe commercial demolition and chiseling passes.
  • Active Vibration Control Architecture: Internal air cushion in the striker barrel combined with an isolated, padded rear handle absorbs hand-arm vibration during all-day operation.
  • Linear Inline Chassis Configuration: Inline motor-to-barrel layout provides balanced weight distribution for ergonomic horizontal wall scaling and downward floor breaking.
  • Constant Response Circuitry: Monitors motor load electronically to regulate speed under heavy resistance while ensuring soft starts and electrical overload protection.
  • 12-Position Vario-Lock Indexing: Allows operators to rotate and lock SDS-Max chisels into 12 distinct attack positions to match tight workspace angles.

What's Included

  • (1) Bosch DH1020VC 15-Amp SDS-Max Inline Demolition Hammer
  • (1) 360-Degree Articulating Auxiliary D-Handle
  • (1) Tube of Chisel Shank Lubricant Grease
  • (1) Heavy-Duty Molded Jobsite Carrying Storage Case

Technical Specifications

Manufacturer Bosch Power Tools
Model Number DH1020VC
Product Category Corded SDS-Max Inline Demolition Breaker Hammer
Motor Current Rating 15.0 Amps (120 Volts AC / 60 Hz)
Impact Energy (EPTA Certified) 17.0 ft-lbs (23.0 Joules)
Impact Frequency (BPM) 900 - 1,700 Blows Per Minute (Variable Speed Dial)
Chuck Drive Interface SDS-Max Tool-Free Quick-Change Retainer
Chisel Angle Positions 12 Distinct Indexing Angles (Vario-Lock System)
Vibration Dampening Technology Internal Air Cushion & Shock-Absorbing Rear Handle
Electronic Control System Constant Response Circuitry with Soft-Start
Maintenance Diagnostic System Service Minder Carbon Brush Light Indicator
Tool Net Operating Weight 25.10 lbs (401.6 oz / 11.39 kg)
Tool Dimensions (L x W x H) 27.5 in x 5.0 in x 9.0 in (698.5 mm x 127.0 mm x 228.6 mm)
Auxiliary Handle Type 360° Articulating Clamping D-Handle

Pro-Tip: When breaking vertical foundation walls, utilize the linear inline barrel grip to push directly behind the chisel axis; keeping your body aligned with the tool body directs maximum impact force straight into the concrete while minimizing side-load stress on the SDS-Max chuck.