Studio view of nine blue Daredevil spade bits arranged by size ranging from 1/4 inch to 1 inch.
Studio view of nine blue Daredevil spade bits arranged by size ranging from 1/4 inch to 1 inch.
Front view of the retail packaging containing a 9-piece spade bit set highlighting features like 10x faster speed and full-thread tips.
Bosch RapidFeed spade drill bit set displayed in a nylon fabric case. Bits are arranged in two rows with elastic straps and labeled sizes printed in white on blue-painted heads. Sizes range from 3/8" to 1-1/4", designed for fast, clean wood drilling.
Infographic diagram of a single spade bit detailing the self-feeding fullthread tip, speedwave paddle, spur and reamer, and hex shank.
Close-up action shot of a blue spade bit drilling into wood with a graphic overlay highlighting fast drilling and chip removal.
Close-up detail view of the threaded tip and spur entering a piece of wood with text pointing out the spur and reamer tips.
Close-up view of the bit's shank with a magnifying graphic highlighting the 1/4 inch hex shank drive geometry.
Detailed close-up of the metal hex shank with a graphic overlay emphasizing the hex shank drive design.
Low angle lifestyle shot of a construction worker using a drill with a spade bit to bore a hole through a wooden stud overhead.
Studio view of nine blue Daredevil spade bits arranged by size ranging from 1/4 inch to 1 inch.
Studio view of nine blue Daredevil spade bits arranged by size ranging from 1/4 inch to 1 inch.
Front view of the retail packaging containing a 9-piece spade bit set highlighting features like 10x faster speed and full-thread tips.
Bosch RapidFeed spade drill bit set displayed in a nylon fabric case. Bits are arranged in two rows with elastic straps and labeled sizes printed in white on blue-painted heads. Sizes range from 3/8" to 1-1/4", designed for fast, clean wood drilling.
Infographic diagram of a single spade bit detailing the self-feeding fullthread tip, speedwave paddle, spur and reamer, and hex shank.
Close-up action shot of a blue spade bit drilling into wood with a graphic overlay highlighting fast drilling and chip removal.
Close-up detail view of the threaded tip and spur entering a piece of wood with text pointing out the spur and reamer tips.
Close-up view of the bit's shank with a magnifying graphic highlighting the 1/4 inch hex shank drive geometry.
Detailed close-up of the metal hex shank with a graphic overlay emphasizing the hex shank drive design.
Low angle lifestyle shot of a construction worker using a drill with a spade bit to bore a hole through a wooden stud overhead.
BOSCH

Bosch Spade Drill Bit Set DSB5013P 1/4 to 1-1/2 Inch RapidFeed (13-Piece Full-Cone Threaded Tip Hex Shank Wood Framing Conduit Rough In Case)

In stock
SKU: DSB5013P
$28.29 USD

Description

Bosch Promotional Logo Logout

Bosch RapidFeed DSB5013P 13-Piece Self-Feeding Spade Drill Bit Set

The Bosch RapidFeed DSB5013P 13-piece spade drill bit set delivers rapid, self-feeding bore cutting and clean hole breakouts across heavy framing lumber, plywood subfloors, oriented strand board (OSB), and wood composites. Manufactured from black oxide-coated hardened alloy steel with a 135-degree cutting angle, these aggressive wood-boring bits span cutting diameters from 1/4 in to 1-1/2 in. Featuring self-pulling full-cone threaded tips, contoured paddle flutes for immediate chip evacuation, spur and reamer cutting edges, and 1/4-inch hex power groove shanks, this complete boring system drives smoothly through structural studs in corded drills and high-torque cordless impact drivers.

Best Used For:

  • Electrical and Conduit Rough-Ins: Boring clean, splinter-free wire runs and PVC conduit pass-throughs through multiple 2x4 and 2x6 timber wall studs.
  • Plumbing Supply Line and Pipe Installation: Drilling large-diameter 1-1/8-inch to 1-1/2-inch clearance holes through floor joists and framing plates for PEX and copper water lines.
  • Cabinetry and Structural Timber Framing: Sizing precise dowel holes and hardware pockets in structural posts, plywood subflooring, and engineered lumber beams without surface tear-out.

Key Performance & Safety Features

  • Full-Cone Threaded Lead Tip: Pulls the spade bit aggressively through wood fibers on contact to eliminate drill bit walking and reduce operator push effort.
  • Contoured Chip-Ejection Paddle: Curved paddle geometry lifts and throws wood chips away from the cutting hole to prevent jamming and flute clogging.
  • Spur and Reamer Cutting Geometry: Dual cutting spurs scribe hole perimeters cleanly before the paddle face enters, virtually eliminating exit-side wood breakout.
  • 1/4-Inch Hex Power Groove Shank: Locks firmly into standard quick-change impact driver chucks and 3-jaw drill chucks to eliminate shank slippage under high torque.
  • Black Oxide Protective Coating: Provides increased lubricity to lower frictional heat buildup while resisting corrosion in damp jobsite environments.
  • Impact-Rated Toughness: Engineered with a reinforced steel core to withstand high-torque pulsation shocks delivered by modern 18V impact drivers.

What's Included

  • (13) Bosch RapidFeed Spade Drill Bits: 1/4", 3/8", 1/2", 9/16", 5/8", 11/16", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2"
  • (1) Heavy-Duty Reinforced Folding Nylon Storage Case with Dedicated Elastic Slots

Technical Specifications

Manufacturer Bosch Power Tools
Model Number DSB5013P
Product Line RapidFeed Series Spade Bits
Total Piece Count 13 Drill Bits + 1 Case (14 Pieces Total)
Diameter Range (SAE) 1/4 in to 1-1/2 in (6.35 mm to 38.1 mm)
Drive Shank Interface 1/4" Hex Shank with Quick-Change Power Groove
Lead Tip Design Self-Feeding Full-Cone Threaded Screw Point
Cutting Point Angle 135.0 Degrees
Material Composition Fully Hardened High-Carbon Alloy Steel
Surface Treatment Black Oxide Thermal Wear-Resistant Finish
Target Substrates Dimensional Framing Lumber, Plywood, OSB, Hardwoods, Softwoods
Tool Compatibility 1/4" Impact Drivers, 3/8" Drills, 1/2" Drill Drivers
Storage Enclosure Padded Ballistic Nylon Roll-Up Case with Hook-and-Loop Closure

Pro-Tip: When drilling all the way through visible finish materials, ease off forward drill pressure as the center threaded cone breaks through the backside; this allows the outer scoring spurs to slice the wood fibers cleanly without blowing out large splinters.