Bosch Rotary Hammer Drill GBH18V-24CN 18V SDS Plus Bare Tool (1-4/5 Ft Lbs Impact Energy 1 Inch Concrete Capacity KickBack Control Anti Vibration)

Bosch GBH18V-24CN 18V Brushless SDS-Plus Bulldog Rotary Hammer Drill Bare Tool

The Bosch GBH18V-24CN 18V Brushless SDS-Plus Bulldog Rotary Hammer Drill Bare Tool is an industrial pneumatic drilling and light chiseling power tool engineered for anchor hole drilling, concrete overhead ceiling fastening, and brick wall penetration across commercial masonry construction sites. Delivering 1-4/5 ft-lbs of EPTA impact energy at 0 to 4,350 blows per minute (BPM) and 0 to 980 RPM, this 6-2/5 pound tool drills holes up to 1 inch in concrete, 1-1/4 inches in wood, and 1/2 inch in steel. Outfitted with KickBack Control acceleration sensors, Vario-Lock chisel positioning, an anti-vibration damping handle, and Bluetooth smart connectivity for performance diagnostics, this cordless tool operates on any Bosch 18V or AMPShare battery system. **Battery and charger sold separately.

Best Used For:

• Overhead Concrete Anchor & Drop-In Pin Drilling: Drilling 1/4-inch to 5/8-inch anchor holes in concrete ceilings for threaded rod drop hangers and duct straps.
• Brick & Masonry Wall Conduit Penetration: Boring clean 1-inch passage holes through poured concrete and cinder block walls for electrical conduit.
• Light Concrete & Tile Chisel Demolition: Removing thinset mortar, ceramic wall tile, and concrete spall using SDS-plus chisels in hammer-only mode.

Key Performance & Safety Features

• 1-4/5 Ft-Lbs Impact Energy EPTA Rating: High-output pneumatic hammer mechanism drives solid SDS-plus drill bits quickly through dense aggregate.
• Integrated KickBack Control Sensor: Internal acceleration sensors shut down motor power automatically if the bit binds up to prevent sudden tool rotation.
• High-Efficiency Brushless Motor Drive: Brushless motor maximizes battery power transfer and extends overall runtime during continuous drilling.
• Vario-Lock Chisel Rotation System: Rotates and locks SDS-plus chisels into 40 distinct angles to optimize mechanical leverage during tile removal.
• Anti-Vibration Handle & Ergonomic L-Shape: Internal dampening spring isolates motor vibration to reduce arm fatigue during overhead drilling.
• Bosch Toolbox App Smart Connectivity: Built-in connectivity module allows users to track tool status, adjust soft-start settings, and check diagnostic logs.

What's Included

• (1) Bosch GBH18V-24CN 18V Brushless SDS-Plus Bulldog Rotary Hammer (Bare Tool)
• (1) 360-Degree Auxiliary Side Handle
• (1) Adjustable Depth Gauge Rod

Technical Specifications

Pro-Tip: Apply a light coat of grease to the shank of your SDS-plus drill bits before inserting them into the chuck; keeping the shank lubricated prevents friction wear inside the locking mechanism and maximizes impact energy transfer.