Bosch Rotary Hammer Drill Kit GBH18V-26DK24 18V SDS-plus 1 Inch (1.9 Ft-Lbs Impact 4350 BPM EC Brushless KickBack Control Dual CORE18V 8.0Ah)

Bosch GBH18V-26DK24 18V 1-Inch SDS-plus Rotary Hammer Kit

The Bosch GBH18V-26DK24 18V 1-Inch SDS-plus Bulldog Rotary Hammer Kit is a cordless concrete drilling and chiseling power tool engineered for setting structural anchors, boring utility penetrations, and executing light chipping in cured concrete slabs and masonry structures. Driven by an EC Brushless motor that delivers 1.9 foot-pounds of EPTA impact energy, a variable speed range of 0 to 890 RPM, and an impact rate of 0 to 4,350 blows per minute, this 5.8-pound D-handle tool incorporates KickBack Control technology to disengage the drive system during bit bind-up conditions. Outfitted with two CORE18V 8.0 Ah High Power batteries utilizing 21700 cell architecture, an 18V fast charger, a 360-degree auxiliary handle, and a carrying case, this kit executes high-volume overhead and downward drilling.

Best Used For:

• Concrete Anchor & Rebar Tie Installation: Drilling 1/2-inch to 1-inch diameter anchor holes in poured concrete slabs and tilt-up wall panels.
• Thin-Wall Core Bit Masonry Penetrations: Boring large utility openings up to 2-5/8 inches in diameter through cinder block and brick masonry.
• Light Demolition & Chipping Operations: Removing tile, scaling concrete splatter, and slotting conduit channels in hammer-only mode.

Key Performance & Safety Features

• 1.9 Ft.-Lbs. EPTA Impact Energy Engine: High-efficiency EC Brushless motor delivers 1.9 ft-lbs of impact energy for rapid drilling throughput.
• KickBack Control Safety System: Integrated acceleration sensor disengages the tool motor automatically during sudden bit binding events.
• Dual CORE18V 8.0 Ah High Power Batteries: Advanced 21700 lithium-ion cell technology doubles runtime and power delivery under heavy loads.
• Ergonomic D-Handle Frame Architecture: Traditional D-handle design provides balanced control for downward floor drilling and overhead ceiling work.
• CoolPack 2.0 Heat Management: Advanced battery housing cools internal battery cells faster to extend total operational lifespan.
• Variable-Speed Reversing Trigger: Provides precise bit starts and controlled backing-out when drilling deep concrete holes.

What's Included

• (1) GBH18V-26D 18V EC Brushless SDS-plus Bulldog 1 In. Rotary Hammer
• (2) GBA18V80 18V CORE18V Lithium-Ion 8.0 Ah High Power Batteries
• (1) 18V Lithium-Ion Battery Fast Charger
• (1) 360-Degree Auxiliary Side Handle
• (1) Adjustable Depth Gauge
• (1) Heavy-Duty Carrying Case

Technical Specifications

Pro-Tip: Apply a thin coat of high-temperature bit grease to SDS-plus bit shanks prior to inserting into the chuck; proper shank lubrication protects the internal anvil and chuck seals during continuous 4,350 BPM concrete drilling passes.