Bosch Reconditioned Rotary Hammer Kit GBH18V-36CK24-RT 1-9/16 Inch SDS-max Core Drill (18V BITURBO 5.2 Ft-Lbs Impact Heavy Concrete Demolition)

Industrial Cordless Concrete Demolition and Anchor Boring Performance

The Bosch GBH18V-36CK24-RT Reconditioned 18V PROFACTOR Brushless 1-9/16-inch SDS-max Rotary Hammer Kit delivers 5.2 Ft.-Lbs. of impact energy for high-speed drilling and heavy-duty concrete chipping. Driven by high-performance BITURBO Brushless technology, this commercial-grade power tool matches standard corded tool capabilities to run large-diameter masonry anchor holes and through-hole structural layout conduit. Integrated electronic KickBack Control sensors immediately shut down the motor during sudden bit binds, while internal air dampening systems actively mitigate structural vibration to minimize operator fatigue on commercial jobsites.

Note: This is a manufacturer-reconditioned tool, certified to look and perform like new.

Best Used For:

• Structural Anchoring: Boring large-diameter structural anchor holes up to 1-9/16 inches deep into reinforced or cured concrete structures.
• Utility Thru-Drilling: Running heavy core bits up to 4 inches for clean electrical conduit and plumbing pipe penetration layouts.
• Masonry Demolition: Chipping, scaling, and breaking concrete, brickwork, or tile using advanced multi-position chisel rotation modes.

Key Performance & Safety Features

• BITURBO Brushless Drivetrain: Combines high-output magnets and optimized motor layout to supply industrial corded performance over an 18V battery network.
• High Impact Output: Produces 5.2 Ft.-Lbs. of EPTA impact energy for accelerated penetration speeds through dense structural aggregate.
• KickBack Control Protection: Employs built-in physical acceleration sensors to kill power instantly if a drill bit encounters structural rebar binds.
• Interactive User Interface: Displays instant diagnostic readouts, active temperature monitoring, and dynamic battery charge states directly on the tool housing.
• Vibration Control Dampening: Utilizes extended internal air cushions alongside decoupled handle designs to drastically lower continuous user fatigue.
• Vario-Lock Chisel System: Allows workers to rotate and firmly lock chisels into customized working angles for accurate surface scaling jobs.

What's Included

• (1) GBH18V-36C PROFACTOR 18V Connected-Ready SDS-max 1-9/16 In. Rotary Hammer
• (2) GBA18V80 18V CORE18V Lithium-Ion 8.0 Ah High Power Batteries
• (1) GAL18V-160C 18V Lithium-Ion Turbo Charger
• (1) Auxiliary Handle
• (1) Heavy-Duty Carrying Case

Technical Specifications