Studio view of the Bosch BlueGranite Turbo 1/8 inch hammer drill bit showing the blue flutes, carbide tip, and hex shank.
Infographic diagram labeling the robust carbide head, milled U-flutes, and hex shank for impact driver compatibility.
Cutaway illustration of the drill bit deep inside a concrete block, demonstrating its ability to cut through rebar reinforcement.
High-angle action shot of a gloved worker using a Bosch rotary hammer to drill downwards into a concrete floor.
Action shot of a worker using a rotary hammer equipped with the bit to drill horizontally into a concrete wall near conduit pipes.
Graphic titled Best For displaying images of masonry, brick, block, and concrete to show suitable materials.
Action shot of a worker installing an outlet box in a kitchen, using a cordless drill with the BlueGranite bit to drill into a tiled wall.
Action shot of a worker wearing a yellow hard hat using a drill to anchor a metal electrical box into a white cinder block wall.
Studio lifestyle shot of a single BlueGranite Turbo drill bit resting on a piece of granite next to stack of tiles and a concrete block.
Close-up studio shot of the drill bit resting on a piece of granite with the Bosch BlueGranite Turbo logo overlay.
Studio view of the Bosch BlueGranite Turbo 1/8 inch hammer drill bit showing the blue flutes, carbide tip, and hex shank.
Infographic diagram labeling the robust carbide head, milled U-flutes, and hex shank for impact driver compatibility.
Cutaway illustration of the drill bit deep inside a concrete block, demonstrating its ability to cut through rebar reinforcement.
High-angle action shot of a gloved worker using a Bosch rotary hammer to drill downwards into a concrete floor.
Action shot of a worker using a rotary hammer equipped with the bit to drill horizontally into a concrete wall near conduit pipes.
Graphic titled Best For displaying images of masonry, brick, block, and concrete to show suitable materials.
Action shot of a worker installing an outlet box in a kitchen, using a cordless drill with the BlueGranite bit to drill into a tiled wall.
Action shot of a worker wearing a yellow hard hat using a drill to anchor a metal electrical box into a white cinder block wall.
Studio lifestyle shot of a single BlueGranite Turbo drill bit resting on a piece of granite next to stack of tiles and a concrete block.
Close-up studio shot of the drill bit resting on a piece of granite with the Bosch BlueGranite Turbo logo overlay.
BOSCH

Bosch Hammer Drill Bit HCBG01T 1/8 Inch BlueGranite Turbo Hex Shank Carbide Tipped Masonry Concrete Brick Power Fastener Pilot Boring Anchor Tool

Only 2 left
SKU: HCBG01T
$3.29 USD

Description

Bosch Promtional Logo Logout

Contractor-Grade 1/8-Inch Impact-Rated Hex Shank Masonry Bit with Upgraded Four-Grind Carbide Centering Head and Deep-Spiral Dust Removal U-Flutes

The Bosch HCBG01T BlueGranite Turbo 1/8 Inch Hammer Drill Bit Impact Rated Hex Shank Carbide Tipped Masonry Concrete 3 Inch Length delivers specialized rotary percussive excavation utility and exceptional structural pilot hole preparation efficiency across demanding residential, commercial, and engineering jobsites. Engineered with a robust 1/4-inch hex shank configuration that connects natively to high-torque cordless impact drivers and standard hammer drills, this premium consumable bit maintains 2x faster drilling velocities and up to 5x longer operational lifespan cycles than baseline masonry bits. This professional contractor solution resolves surface skidding layout errors on smooth brick, structural binding stalls caused by high-friction dust column pack-in, and catastrophic tip shearing failures under continuous percussive loads by combining a multi-grind carbide centering pilot with milled deep-spiral U-flutes and an upgraded four-grind head matrix carrying two additional cutting angles. Outfitted with an essential 1/8-inch boring capacity, a 3-inch overall structural tool length providing a 2-inch maximum active depth, and a custom-formulated Bosch carbide wear tip, this robust masonry bit optimizes subcontractor mounting metrics during small masonry anchor installations, low-profile screw pilot routing, and heavy electrical staging cycles.

Best Used For:

  • Masonry Fastener Pilot Boring: Drilling precise, uniform pilot holes down to 2 inches deep natively for setting small-diameter concrete screws and toggle anchors without bit drift.
  • Commercial Utility Strap Mounting: Pre-drilling rapid utility path channels through dense fired clay bricks and cinder block mortars to fix conduit boxes or light control panels single-handedly.
  • Subcontractor Service Call Layouts: Utilizing high-torque cordless impact drivers in confined wiring channels or ceiling bays to quickly establish reliable anchors in masonry boundaries.

Key Performance & Safety Features

  • Impact Rated Hex Shank: Power-hardened 1/4-inch hex mounting base stops chuck slippage errors completely, transmitting percussive hammer drill impact vectors smoothly.
  • Four-Grind Cutting Matrix: Upgraded head engineering introduces two extra cutting angle paths to maximize aggregate material fracture speeds and lower motor burden drops.
  • Multi-Grind Centering Pilot: Integrated mechanical pilot tip bites into concrete boundaries immediately upon trigger pull, preventing wandering paths and surface gouging errors.
  • Milled U-Flute Deep Spirals: Evacuation pathways channel abrasive powder lines out of active holes continuously, mitigating thermal damage and core binding stalls.
  • Bosch Sintered Carbide Base: Micrograin carbide composition resists devastating fracture wear points under heavy loads, retaining edge accuracy across long stone runs.

What's Included

  • (1) Bosch BlueGranite Turbo™ 1/8-Inch x 3-Inch Hex Shank Carbide-Tipped Masonry Drill Bit (HCBG01T)

Technical Specifications

Specification Value
Brand Name Bosch
Model Number HCBG01T
Product Series Alliance BlueGranite Turbo™
Product Classification Type Impact Rated Masonry Drill Bit Accessory
Connection Shank Type Hex Shank quick-change style
Connection Shank Size Style 1/4 in.
Drill Bit Outer Diameter 1/8 in.
Total Mechanical Tool Length 3 in.
Maximum Usable Sizing Length 2 in. max hole depth
Working Head Face Material Carbide Tipped Four-Grind Profile Matrix
Kinetic Tool Compatibility Rating Yes (Impact Drivers and Rotary Hammer Drills)
Target Application Substrates Poured Concrete, Cinder Blocks, Brick Mortar, Hard Stone

Pro-Tip: When deploying these slim impact-rated masonry accessories inside dense cured structural aggregate concrete slabs, avoid applying heavy side pressure on the tool body chassis. Let the percussive hammer action cycle lines work at their native frequency to ensure optimal tracking path accuracy and shield the hex shank connection points from excessive torsional shear strain loops.