Studio view of the Bosch BlueGranite Turbo hammer drill bit, featuring a blue spiral flute design, carbide tip, and a silver hex shank for impact driver compatibility.
Top-down close-up view of the drill bit head showing the 2-cutter carbide tip design for masonry drilling.
Infographic diagram labeling the robust carbide head, milled U-flutes, and hex shank for impact driver compatibility.
Graphic titled Best For displaying images of masonry, brick, block, and concrete to show suitable materials.
Action shot of a worker wearing a yellow hard hat using a drill to anchor a metal electrical box into a white cinder block wall.
High-angle action shot of a gloved worker using a Bosch rotary hammer to drill downwards into a concrete floor.
Action shot of a worker installing an outlet box in a kitchen, using a cordless drill with the BlueGranite bit to drill into a tiled wall.
Action shot of a worker securing a large metal panel to a block wall using a drill equipped with a BlueGranite Turbo bit.
Cutaway illustration of the drill bit deep inside a concrete block, demonstrating its ability to cut through rebar reinforcement.
Studio lifestyle shot of a single BlueGranite Turbo drill bit resting on a piece of granite next to stack of tiles and a concrete block.
Close-up studio shot of the drill bit resting on a piece of granite with the Bosch BlueGranite Turbo logo overlay.
Studio view of the Bosch BlueGranite Turbo hammer drill bit, featuring a blue spiral flute design, carbide tip, and a silver hex shank for impact driver compatibility.
Top-down close-up view of the drill bit head showing the 2-cutter carbide tip design for masonry drilling.
Infographic diagram labeling the robust carbide head, milled U-flutes, and hex shank for impact driver compatibility.
Graphic titled Best For displaying images of masonry, brick, block, and concrete to show suitable materials.
Action shot of a worker wearing a yellow hard hat using a drill to anchor a metal electrical box into a white cinder block wall.
High-angle action shot of a gloved worker using a Bosch rotary hammer to drill downwards into a concrete floor.
Action shot of a worker installing an outlet box in a kitchen, using a cordless drill with the BlueGranite bit to drill into a tiled wall.
Action shot of a worker securing a large metal panel to a block wall using a drill equipped with a BlueGranite Turbo bit.
Cutaway illustration of the drill bit deep inside a concrete block, demonstrating its ability to cut through rebar reinforcement.
Studio lifestyle shot of a single BlueGranite Turbo drill bit resting on a piece of granite next to stack of tiles and a concrete block.
Close-up studio shot of the drill bit resting on a piece of granite with the Bosch BlueGranite Turbo logo overlay.
BOSCH

Bosch Hammer Drill Bit HCBG02T 5/32 Inch Hex Shank BlueGranite Turbo 6 Inch Length Carbide Tip Impact Ready Concrete Masonry Fastening Anchor Tool

In stock
SKU: HCBG02T
$4.59 USD

Description

Bosch Promtional Logo Logout

Industrial-Grade BlueGranite Turbo 5/32-Inch Carbide-Tipped Hammer Drill Bit with Aggressive Hex Shank and Double-Milled Dust Extraction Flutes

The Bosch HCBG02T BlueGranite Turbo 5/32-Inch Hammer Drill Bit delivers specialized masonry penetration utility and exceptional boring speed efficiency across dense structural masonry arrays. Engineered with a diamond-ground carbide cutting point and a 6.0-inch total length profile, this impact-ready accessory handles heavy impact stress while creating uniform clearance paths for high-potency anchor fasteners. This commercial anchoring solution resolves localized drilling skating delays, excessive flute heat accumulation, and spindle spin-out slipping inside standard chucks by combining a positive-engagement drive hex shank with a double-milled U-shaped extraction groove configuration. Outfitted with a 3.0-inch functional flute tracking scale, this premium steel accessory optimizes subcontractor deployment throughput during high-volume Tapcon screw installations, brick utility mounting runs, and structural concrete block fastening procedures.

Best Used For:

  • Tapcon Screw Anchorage: Boring precise 5/32-inch diameter pilot apertures directly into poured foundations and brick facades for masonry screws.
  • Electrical Conduit Mounting: Drilling clean fixture anchor pathways into structural concrete block walls to mount exterior utility junction straps securely.
  • Commercial HVAC Rigging: Penetrating dense stone, stone veneer matrices, and structural ventilation partitions to install custom framing hanger rods.

Key Performance & Safety Features

  • Turbo Dust Extraction: Dual-flute milled U-shape geometry evacuates stone debris chips rapidly to prevent binding blockages and lower tool operating temperatures.
  • No-Slip Hex Shank: Formed drive base seats solidly into three-jaw mechanical chucks or standard 1/4-inch hex impact driver quick-connect sleeves.
  • Diamond-Ground Carbide Tip: Premium brazed carbide head features a sharp centration point to execute immediate, walk-free pilot entries on hard tile and stone.
  • Extended Anchor Reach: Generous 6.0-inch overall length supplies a full 3.0-inch depth clearance matrix to handle recessed substrate fastening.
  • Impact-Ready Hardening: Upgraded carbon alloy steel body withstands the repetitive cyclic hammering blows of professional corded and cordless tools.

What's Included

  • (1) 5/32-Inch x 6.0-Inch BlueGranite Turbo Carbide Hammer Drill Bit

Technical Specifications

Specification Value
Brand Name Bosch
Model Number HCBG02T
Accessory Type Hammer Drill Bit
Cutting Diameter 5/32 in.
Overall Body Length 6.0 in.
Useable Flute Length 3.0 in.
Shank Interface Type Aggressive Hex Drive
Shank Interface Size 5/32 in. Base
Tip Structural Material Diamond-Ground Tungsten Carbide
Flute Geometry Style Milled 2-Flute U-Shape Matrix
Primary Workpiece Scope Masonry, Brick, Concrete Block, Poured Stone
Impact Driver Ready Yes

Pro-Tip: When running this masonry accessory into dense stone blocks, do not maintain constant downward tracking weight. Retract the rotating spindle slightly every few seconds to permit the BlueGranite flutes to flush out accumulated masonry dust packing, protecting the carbide center from heat fatigue.