Studio view of the Bosch BlueGranite Turbo 7-piece drill bit set in a hard plastic case, showing the bits organized by size with red holders.
Close-up detail view of the blue spiral flute and carbide tip of a BlueGranite Turbo drill bit, highlighting the 4-flute design.
Top-down view of the drill bit head showing the multi-grind carbide tip designed for precise starts in masonry.
Close-up view of the hex shank of the drill bit, engraved with size markings and showing the impact-rated design.
Infographic graphic titled "Best For" showing four squares with images of Masonry, Brick, Block, and Concrete to indicate material compatibility.
Action shot of a worker installing an outlet box in a kitchen, using a cordless drill with the BlueGranite bit to drill into a tiled wall.
Action shot of a worker wearing a yellow hard hat using a drill to anchor a metal electrical box into a white cinder block wall.
Action shot of a worker securing a large metal panel to a block wall using a drill equipped with a BlueGranite Turbo bit.
Studio lifestyle shot of a single BlueGranite Turbo drill bit resting on a piece of granite next to stack of tiles and a concrete block.
Studio view of the Bosch BlueGranite Turbo 7-piece drill bit set in a hard plastic case, showing the bits organized by size with red holders.
Close-up detail view of the blue spiral flute and carbide tip of a BlueGranite Turbo drill bit, highlighting the 4-flute design.
Top-down view of the drill bit head showing the multi-grind carbide tip designed for precise starts in masonry.
Close-up view of the hex shank of the drill bit, engraved with size markings and showing the impact-rated design.
Infographic graphic titled "Best For" showing four squares with images of Masonry, Brick, Block, and Concrete to indicate material compatibility.
Action shot of a worker installing an outlet box in a kitchen, using a cordless drill with the BlueGranite bit to drill into a tiled wall.
Action shot of a worker wearing a yellow hard hat using a drill to anchor a metal electrical box into a white cinder block wall.
Action shot of a worker securing a large metal panel to a block wall using a drill equipped with a BlueGranite Turbo bit.
Studio lifestyle shot of a single BlueGranite Turbo drill bit resting on a piece of granite next to stack of tiles and a concrete block.
BOSCH

Bosch Hammer Drill Bit Set HCBG700T 7 Piece BlueGranite Turbo Impact Rated Hex Shank Carbide Tipped Masonry Concrete Brick Anchoring Layout Bits Case

In stock
SKU: HCBG700T
$24.89 USD

Description

Bosch Promtional Logo Logout

Industrial-Grade 7-Piece Impact-Rated Hex Shank Masonry Bit Set with Upgraded Four-Grind Carbide Centering Heads and Deep-Spiral Dust Removal Flutes

The Bosch HCBG700T BlueGranite Turbo 7 Piece Hammer Drill Bit Set Impact Rated Hex Shank Carbide Tipped Masonry Concrete Brick delivers specialized percussive excavation utility and exceptional structural hole preparation efficiency across demanding residential, commercial, and engineering jobsites. Engineered with a unified 1/4-inch hex shank configuration that connects natively to high-torque cordless impact drivers and standard hammer drills, these premium bits maintain 2x faster drilling velocities and up to 5x longer operational lifespan cycles than baseline masonry bits. This professional contractor kit resolves surface skidding layout errors on smooth brick, structural binding stalls caused by high-friction dust column pack-in, and catastrophic tip shearing failures under continuous percussive loads by combining a multi-grind carbide centering pilot with milled deep-spiral U-flutes and an upgraded four-grind head matrix carrying two additional cutting angles. Outfitted with an essential sizing layout stretching from 1/8-inch to 3/8-inch capacities, a 6-inch overall structural length, and a protective storage cell case module, this robust accessory assembly optimizes subcontractor mounting metrics during light-gauge tapcon framing runs, commercial electrical conduit anchoring, and heavy aggregate concrete installation loops.

Best Used For:

  • Structural Concrete Anchoring: Boring straight, precise pilot holes up to 4 inches deep natively for setting heavy mechanical sleeve anchors and tapcon fasteners without bit drift.
  • Commercial Masonry Fastening: Drilling quick utility routing pathways through dense fired clay bricks and aggregate mortar joints to secure heavy electrical junction housings box lines.
  • Subcontractor Service Call Tasks: Utilizing high-torque cordless impact drivers inside cramped attic framing structures or low-light crawlspace bays to mount conduit straps securely.

Key Performance & Safety Features

  • Impact Rated Hex Shank: Power-hardened 1/4-inch hex mounting base stops chuck slippage errors completely, transmitting percussive hammer drill impact vectors smoothly.
  • Four-Grind Cutting Matrix: Upgraded head engineering introduces two extra cutting angle paths to maximize aggregate material fracture speeds and lower motor burden drops.
  • Multi-Grind Centering Pilot: Integrated mechanical pilot tip bites into concrete boundaries immediately upon trigger pull, preventing wandering paths and surface gouging errors.
  • Milled U-Flute Deep Spirals: Extra-wide evacuation pathways channel abrasive powder lines out of active holes continuously, mitigating thermal damage and core binding stalls.
  • Bosch Sintered Carbide Base: Micrograin carbide composition resists devastating fracture wear points under heavy loads, retaining edge accuracy across long stone runs.

What's Included

  • (1) 1/8-Inch Hex Shank BlueGranite Turbo Masonry Drill Bit
  • (2) 5/32-Inch Hex Shank BlueGranite Turbo Masonry Drill Bits
  • (2) 3/16-Inch Hex Shank BlueGranite Turbo Masonry Drill Bits
  • (1) 1/4-Inch Hex Shank BlueGranite Turbo Masonry Drill Bit
  • (1) 3/8-Inch Hex Shank BlueGranite Turbo Masonry Drill Bit
  • (1) Heavy-Duty High-Impact Polymer Protective Storage Case Shell

Technical Specifications

Specification Value
Brand Name Bosch
Model Number HCBG700T
Product Series Alliance BlueGranite Turbo
Product Classification Type Impact Rated Masonry Drill Bit Accessory Set
Connection Shank Size Style 1/4 in. Hex Shank Quick-Change Design
Total Multi-Pack Module Quantity 7 Pieces
Included Diameter Size Ranges 1/8 in., 5/32 in., 3/16 in., 1/4 in., 3/8 in.
Total Mechanical Tool Length 6 in.
Maximum Flute Sizing Length 4 in. Max Target Depth
Working Tip Structural Engineering Carbide Tipped Four-Grind Profile Matrix
Kinetic Tool Compatibility Rating Yes (Impact Drivers and Rotary Hammer Drills)
Target Application Materials Poured Concrete, Cinder Blocks, Brick Mortar, Structural Stone

Pro-Tip: When deploying these impact-rated masonry accessories inside dense cured structural aggregate concrete slabs, avoid applying heavy side pressure on the tool body chassis. Let the percussive hammer action cycle lines work at their native frequency to ensure optimal tracking path accuracy and shield the hex shank connection points from excessive torsional shear strain loops.