Studio view of ten Bosch SDS-plus Bulldog Xtreme rotary hammer drill bits arranged vertically in a row.
Angled studio view of a single Bulldog Xtreme drill bit showing the SDS-plus shank and variable flute design.
Close-up detail view of the solid full-carbide head tip design capable of drilling through reinforced concrete.
Cross-section action shot showing the drill bit penetrating a concrete slab and drilling directly through an embedded steel rebar.
Cutaway illustration of the drill bit deep inside a concrete block, demonstrating its ability to cut through rebar reinforcement.
High-angle action shot of a gloved worker using a Bosch rotary hammer to drill downwards into a concrete floor.
Action shot of a worker using a rotary hammer equipped with the bit to drill horizontally into a concrete wall near conduit pipes.
Black and white graphic icon logo indicating the tool is compatible with SDS-plus chuck systems.
Studio view of ten Bosch SDS-plus Bulldog Xtreme rotary hammer drill bits arranged vertically in a row.
Angled studio view of a single Bulldog Xtreme drill bit showing the SDS-plus shank and variable flute design.
Close-up detail view of the solid full-carbide head tip design capable of drilling through reinforced concrete.
Cross-section action shot showing the drill bit penetrating a concrete slab and drilling directly through an embedded steel rebar.
Cutaway illustration of the drill bit deep inside a concrete block, demonstrating its ability to cut through rebar reinforcement.
High-angle action shot of a gloved worker using a Bosch rotary hammer to drill downwards into a concrete floor.
Action shot of a worker using a rotary hammer equipped with the bit to drill horizontally into a concrete wall near conduit pipes.
Black and white graphic icon logo indicating the tool is compatible with SDS-plus chuck systems.
BOSCH

Bosch Rotary Hammer Drill Bit Set HCFC2011B10 3/16 Inch SDS Plus 10 Pack Full Carbide Head Bits (6-1/2 Length Concrete Rebar Anchoring Tool)

Only 2 left
SKU: HCFC2011B10
$33.59 USD

Description

Bosch Promtional Logo Logout

Contractor-Grade 3/16-Inch SDS-Plus Full-Carbide Head Rotary Hammer Bits with Variable Dust Flutes, Diffusion-Bonded Anchors, and Visual Wear Scale

The Bosch HCFC2011B10 3/16 Inch SDS Plus Bulldog Xtreme Rotary Hammer Drill Bits 10 Pack Full Carbide Head Concrete Rebar 6-1/2 Inch delivers specialized masonry percussive excavation utility and exceptional structural hole roundness efficiency across demanding commercial foundations and engineering worksites. Engineered with an industry-standard SDS-plus connection shank configuration that mounts natively to professional rotary hammers, these premium consumables utilize a 100% full-carbide head matrix bound via diffusion-bonding solid-state welding to drill through rebar-embedded concrete up to 4X longer than standard bits. This professional contractor solution resolves catastrophic tip shearing errors, uneven anchor pocket deformities, and high-friction battery drain on cordless hammer lines by combining a precise centric conical pilot tip layout with optimized variable flutes that change from a four-flute channel to a two-flute scroll path. Outfitted with an essential 3/16-inch cutting diameter, a 6-1/2 inch overall tool length providing a 4-inch active drilling depth, and integrated anchoring compliance wear mark indicators, this heavy-duty multi-pack system optimizes subcontractor mounting metrics during mechanical drop-in anchor staging, conduit strut anchoring, and continuous vertical structural framing pins.

Best Used For:

  • Reinforced Concrete Fastening: Boring accurate pilot channels down to 4 inches deep natively through dense structural slabs containing hidden steel rebar networks without tip fractures.
  • Commercial Utility Anchor Staging: Sizing tight, round mechanical anchors holes uniformly to install overhead pipe hangers, electrical panel casing brackets, and ductwork supports.
  • Subcontractor Cordless Production Runs: Executing high-volume anchoring layouts on commercial floor grades single-handedly while maximizing cordless tool battery life metrics by 25%.

Key Performance & Safety Features

  • Diffusion-Bonded Jointing: Proprietary high-heat high-pressure assembly bonds the full-carbide tip matrix to the alloy steel frame seamlessly to defeat severe friction strain loops.
  • Centric Conical Pilot Tip: Geometric center guide point bites aggregate faces instantly on contact, stopping alignment bit walking errors to deliver perfectly rounded hole specs.
  • Variable Flute Architecture: Transitioning core shapes pull dust slurry out of deep paths rapidly, lowering internal bit temperatures to prevent aggregate binding stalls.
  • Anchoring Tolerance Wear Mark: Integrated visual tracking indicator confirms the bit diameter remains within precise regulatory limits for secure industrial anchor holds.
  • Solid Full-Carbide Head: 100% solid tungsten-carbide block face maintains aggressive percussive cutting speeds when encountering heavy reinforcing iron grids.

What's Included

  • (10) Bosch Bulldog Xtreme 3/16-Inch x 6-1/2 Inch Full-Carbide Head SDS-Plus Rotary Hammer Bits

Technical Specifications

Specification Value
Brand Name Bosch
Model Number HCFC2011B10
Product Series Alliance Bulldog Xtreme Full-Carbide Head
Product Classification Type SDS-Plus Rotary Hammer Drill Bit Multi-Pack
Total System Multi-Pack Quantity 10 Bits
Drill Bit Outer Diameter 3/16 in.
Connection Shank Size Style SDS-Plus Standard Quick-Change Shank
Total Mechanical Tool Length 6-1/2 in.
Maximum Usable Sizing Length 4 in. Max Hole Depth
Working Head Face Material 100% Solid Full-Head Carbide Tip Matrix
Flute Profile Configuration Variable 4-Flute to 2-Flute Dust Speed Track
Target Application Substrates Reinforced Concrete with Rebar, Masonry Blocks, Structural Fired Brick

Pro-Tip: Check the side wear mark profile on the carbide cutter edge before driving mechanical anchor expansion shields into heavy overhead runs. If structural abrasion lines clear out the wear mark completely, retire the bit to maintain strict diameter tolerance tracking alignment standards across structural tie points.