Bosch Masonry Concrete Nails NB-063 5/8 Inch Track Fasteners (Plastic Collated 1000 Pack Zinc Plated Steel Framing GNB18V-12 Cordless Nail Gun)

Bosch NB-063 5/8" Zinc-Plated Smooth Shank Plastic Collated Masonry Nails (1,000-Pack)

The Bosch NB-063 5/8-inch zinc-plated smooth shank masonry nails fasten cold-formed metal drywall tracks, electrical conduit clips, and structural brackets directly into poured concrete slabs, foundation blocks, and pre-cast masonry decks. Engineered with ballistic-grade carbon alloy steel and protected by an electro-galvanized zinc barrier, these plastic-collated strip pins feed reliably through the Bosch GNB18V-12 cordless 18V concrete nailer without requiring powder cartridges or aerosol gas fuel cells. Featuring official ICC-ES building code compliance, a heavy 2-gauge shank diameter, and 1,000 pins per contractor box, they provide commercial drywallers, framers, and MEP contractors with rapid cyclic installation and verified structural holding power.

Best Used For:

• Commercial Metal Drywall Track to Concrete Fastening: Securing 20-gauge to 16-gauge steel base tracks firmly into cured concrete floors and pre-cast concrete deck ceilings.
• Electrical and Low-Voltage Conduit Anchoring: Nailing EMT conduit straps, junction boxes, and bridal rings directly to concrete masonry units (CMU) and foundation walls.
• Mechanical Plumbing and Wire Lath Mounting: Fastening water pipe isolators, ductwork suspension straps, and acoustic perimeter channels without pre-drilling anchor holes.

Key Performance & Safety Features

• Official ICC-ES Code Compliance: Tested and certified with the Bosch GNB18V-12 cordless nailer to satisfy commercial building inspections and structural load ratings.
• Anti-Corrosive Zinc Galvanization: Electro-plated zinc barrier seals out moisture to prevent oxidation, corrosion, and surface rust staining in interior commercial environments.
• High-Speed Plastic Strip Collation: Durable plastic carrier strips ensure smooth, continuous cyclic feeding and jam-free cycling in both 22-shot and 44-shot nail magazines.
• Ballistic Smooth Shank Geometry: High-hardness ballistic point profile pierces hard concrete aggregate and masonry cleanly without chipping surrounding surfaces.
• Gas-Free Direct Fastening: Optimized specifically for cordless mechanical fly-wheel drive systems, eliminating hazardous powder loads and aerosol fuel cells from the jobsite.
• High-Volume 1,000-Count Contractor Box: Maximizes continuous production time on large-scale commercial framing jobs with fewer packaging changeouts.

What's Included

• (1) Box of Bosch NB-063 5/8" Zinc-Plated Smooth Shank Masonry Nails (1,000 Nails Total)

Technical Specifications

Pro-Tip: Set the tool depth selector on your GNB18V-12 nailer before fastening into hard concrete; aligning the pin head flush with the metal track flange prevents substrate blowout and guarantees full clamping tension.