Bosch Masonry Concrete Nails NB-075 3/4 Inch Track Fasteners (Plastic Collated 1000 Pack Zinc Plated Steel Framing GNB18V-12 Cordless Nail Gun)

Bosch NB-075 3/4" Zinc-Plated Smooth Shank Plastic Collated Masonry Nails (1,000-Pack)

The Bosch NB-075 3/4-inch zinc-plated smooth shank masonry nails fasten cold-formed metal drywall tracks, electrical conduit clips, and wire mesh directly into poured concrete slabs, foundation footings, and structural masonry. Engineered with ballistic carbon alloy steel and coated with an electro-galvanized zinc barrier, these plastic-collated strip fasteners feed seamlessly through the Bosch GNB18V-12 cordless 18V concrete nailer without powder actuation or aerosol gas fuel cells. Featuring official ICC-ES building code compliance, a heavy 2-gauge shank diameter, and 1,000 pins per contractor box, they provide commercial drywallers, framers, and MEP contractors with rapid cyclic installation and verified structural holding power.

Best Used For:

• Commercial Metal Drywall Track to Concrete Fastening: Securing 20-gauge to 16-gauge steel base tracks firmly into cured concrete floors and pre-cast concrete deck ceilings.
• Electrical and Low-Voltage Conduit Anchoring: Nailing EMT conduit straps, junction boxes, and bridal rings directly to concrete masonry units (CMU) and foundation walls.
• Mechanical Plumbing and Wire Lath Mounting: Fastening water pipe isolators, ductwork suspension straps, and acoustic perimeter channels without pre-drilling anchor holes.

Key Performance & Safety Features

• Official ICC-ES Code Compliance: Tested and certified with the Bosch GNB18V-12 cordless nailer to satisfy commercial building inspections and structural load ratings.
• Anti-Corrosive Zinc Galvanization: Electro-plated zinc barrier seals out moisture to prevent oxidation, corrosion, and surface rust staining in interior commercial environments.
• High-Speed Plastic Strip Collation: Durable plastic carrier strips ensure smooth, continuous cyclic feeding and jam-free cycling in both 22-shot and 44-shot nail magazines.
• Ballistic Smooth Shank Geometry: High-hardness ballistic point profile pierces hard concrete aggregate and masonry cleanly without chipping surrounding surfaces.
• Gas-Free Direct Fastening: Optimized specifically for cordless mechanical fly-wheel drive systems, eliminating hazardous powder loads and aerosol fuel cells from the jobsite.
• High-Volume 1,000-Count Contractor Box: Maximizes continuous production time on large-scale commercial framing jobs with fewer packaging changeouts.

What's Included

• (1) Box of Bosch NB-075 3/4" Zinc-Plated Smooth Shank Masonry Nails (1,000 Nails Total)

Technical Specifications

Pro-Tip: Adjust your Bosch GNB18V-12 tool depth selector so the nail head sets perfectly flush against the track surface; proper depth setting guarantees full holding tension without over-driving the fastener into cured concrete.