Bosch Rotary Hammer RH850VC 1-7/8 Inch SDS Max (14.5 Amp 9.3 Ft Lbs Impact Energy Vibration Control Turbo Power Concrete Drilling Chiseling Tool)

Bosch RH850VC 1-7/8-Inch SDS-max 14.5-Amp Combination Rotary and Demolition Hammer

The Bosch RH850VC 1-7/8-Inch SDS-max Combination Hammer delivers heavy-duty rotary drilling and high-output concrete demolition across cured aggregate slabs, rebar-reinforced foundations, stone masonry, and structural footings. Driven by a high-torque 14.5-amp motor producing 9.3 ft-lbs of impact energy, this 20-lb corded hammer features a dual-mode selector to transition smoothly between rotary hammer drilling and hammer-only chiseling operations. An integrated Turbo Power mode directs a 20% power boost directly into chiseling applications, while a multi-stage Vibration Control system combines a decoupled main handle and tuned mass dampener to reduce harmonic fatigue during all-day commercial anchor setting and slab breaking.

Best Used For:

• Structural Concrete Anchor Drilling: Boring large-diameter through-holes and setting 1-7/8-inch heavy structural anchors in cured bridge decks, commercial slabs, and reinforced foundation walls.
• Heavy Concrete Demolition & Trenching: Breaking up thick concrete footings, removing floor tile beds, and trenching utilities using bull point and flat chisels with 9.3 ft-lbs of kinetic impact.
• Core Bit Penetration & Pipe Conduit Passes: Driving large SDS-max core cutters through solid concrete block and structural masonry walls for commercial plumbing and HVAC rough-ins.

Key Performance & Safety Features

• High-Output 14.5-Amp Motor: Generates 9.3 ft-lbs of impact energy to match the drilling and demolition capacity of heavier 2-inch class rotary hammers.
• Multi-Stage Vibration Control: Combines an elongated internal air cushion, tuned mass damper, and decoupled rear handle to absorb punishing recoil vibrations.
• Turbo Power Demolition Mode: Automatically diverts rotational energy to deliver an extra 20% impact boost exclusively when switched to hammer-only chiseling mode.
• Constant Response Electronic Circuitry: Provides smooth soft starts, maintains consistent motor speed under extreme working loads, and protects components against thermal overload.
• Integrated Safety Slip Clutch: Disengages gear drive immediately during bit bind-ups to minimize high-torque rotational kickback and safeguard the operator.
• Tool-Free SDS-max Bit Holder: Features automatic bit locking with maximum impact energy transfer and dust-sealed retention collars.

What's Included

• (1) Bosch RH850VC 1-7/8-Inch SDS-max Combination Rotary Hammer
• (1) 360-Degree Auxiliary Side Handle
• (1) Heavy-Duty Jobsite Carrying Case

Technical Specifications

Pro-Tip: Clean and apply a dab of high-temperature grease to your SDS-max bit shanks before locking them into the chuck; keeping the drive splines lubricated prevents friction welding inside the barrel during heavy continuous chiseling cycles.