Bosch Spade Bit Set SB0010 10 Piece Woodboring Hex Shank (Chisel Point Dual Spurs 1/4 In Power Groove Fast Timber Cutting Paddle Bits Kit)
Couldn't load pickup availability
Bosch SB0010 10 Piece Chisel Point Woodboring Spade Bit Set
The Bosch SB0010 10-Piece Woodboring Spade Bit Set operates as a high-speed wood drilling accessory kit engineered to bore clean wire, pipe, and conduit pass-through holes in framing lumber, OSB sheathing, and plywood. Featuring a hardened high-speed steel matrix, a 1/4-inch quick-change hex shank with power groove, self-centering chisel-point tips, and dual precision-ground spurs, these paddle bits range from 1/4 inch to 1 inch in diameter. Designed for electric drills and impact drivers, this set scores wood fibers prior to chip removal to prevent exit blowout across residential framing, electrical, and plumbing rough-in applications.
Best Used For:
- Electrical Wiring & Cable Rough-Ins: Boring smooth wiring channels through wall studs, ceiling joists, and floor plates without snagging conductor insulation.
- Plumbing Pipe & Conduit Pass-Throughs: Slicing clean holes in plywood subfloors and framing timber for copper lines, PEX tubing, and PVC drainage pipes.
- General Framing & Woodworking Joinery: Executing accurate blind pocket holes and full-depth penetrations in softwoods, hardwoods, and composite OSB panels.
Key Performance & Safety Features
- Self-Centering Chisel Point Tip: Precision tip initiates instant contact on wood surfaces to eliminate bit skating and maintain hole location accuracy.
- Dual Precision-Ground Outside Spurs: Outer spurs score the hole circumference before the paddle body engages to prevent wood splintering and exit blowout.
- Positively Angled Cutting Edge: Aggressive rake angle on the cutting face removes wood chips continuously to maximize drilling speed.
- Hardened High-Speed Steel (HSS): Thermally tempered alloy construction preserves cutting edge sharpness under severe frictional heat.
- 1/4-Inch Power Groove Hex Shank: Anti-slip shank prevents bit rotation in three-jaw chucks and locks securely into quick-release impact driver collets.
- Impact-Resistant Molded Hard Case: Protective hardshell organizer case keeps bits organized and guards cutting spurs during jobsite transport.
What's Included
- (1) 1/4" Chisel-Point Woodboring Spade Bit
- (1) 3/8" Chisel-Point Woodboring Spade Bit
- (1) 1/2" Chisel-Point Woodboring Spade Bit
- (1) 9/16" Chisel-Point Woodboring Spade Bit
- (1) 5/8" Chisel-Point Woodboring Spade Bit
- (1) 11/16" Chisel-Point Woodboring Spade Bit
- (1) 3/4" Chisel-Point Woodboring Spade Bit
- (1) 13/16" Chisel-Point Woodboring Spade Bit
- (1) 7/8" Chisel-Point Woodboring Spade Bit
- (1) 1" Chisel-Point Woodboring Spade Bit
- (1) Heavy-Duty Jobsite Hard Storage Case
Technical Specifications
| Brand Manufacturer | Bosch Power Tools |
| Model Kit SKU Number | SB0010 |
| Product Classification | Chisel-Point Spade Paddle Drill Bit Set |
| Total Piece Count | 10 Bits Plus Storage Case (11 Pieces Total) |
| Bit Tip Interface Design | Self-Centering Chisel Point with Dual Outer Spurs |
| Shank Interface Type | 1/4 in. Hex Shank with Integrated Power Groove |
| Accessory Material Matrix | Hardened and Tempered High-Speed Steel (HSS) |
| Size Range Included | 1/4 in. to 1 in. (Graduated Imperial Diameters) |
| Quick Change Support | Compatible with 1/4 in. Quick-Release Driver Sleeves |
| Primary Target Materials | Softwood, Hardwood, Framing Lumber, Plywood, OSB |
| Material Usage Restrictions | Not for Use on Structural Steel, Sheet Metal, or Masonry |
| Product Storage Case | Heavy-Duty Molded Hardshell Case |
| Product Structural Condition | Brand New Original Equipment Accessory Set |
Pro-Tip: When boring large-diameter holes through thick framing timber with the SB0010 spade bits, stop forward pressure just as the chisel point breaks through the backside of the wood. Finish drilling the hole from the reverse side to ensure a clean edge on both sides of the stud.
