A studio shot of the Bosch HS1465 SDS-plus Bulldog Xtreme tile chisel bit featuring a 1-1/2 inch wide angled spade head and a forged alloy steel body designed for rapid tile and mortar removal.
A profile view of the Bosch Bulldog Xtreme tile chisel showcasing the specialized angled head geometry that provides an ideal prying angle for lifting floor and wall tiles.
An informative product graphic of the HS1465 tile chisel highlighting the durable steel construction with an inductive hardening process, the SDS-plus shank, and the self-sharpening edge for increased productivity.
A professional retail packaging view of the Bosch HS1465 1-1/2 inch by 10 inch SDS-plus tile chisel, indicating its compatibility with rotary hammers and high-performance material removal capabilities.
An application infographic for the Bosch Bulldog Xtreme chisel indicating that it is best used for heavy-duty demolition in masonry, brick, block, and concrete.
An action shot of a construction worker using a Bosch rotary hammer with the HS1465 tile chisel to break up a concrete ledge on an outdoor jobsite.
A professional contractor in safety gear using the Bosch SDS-plus tile chisel bit to remove ceramic wall tiles from a masonry substrate during a renovation project.
An overhead view of a worker on scaffolding using the Bosch HS1465 chisel to clear mortar and debris from a brick wall, demonstrating the tool's efficiency in vertical demolition.
A studio shot of the Bosch HS1465 SDS-plus Bulldog Xtreme tile chisel bit featuring a 1-1/2 inch wide angled spade head and a forged alloy steel body designed for rapid tile and mortar removal.
A profile view of the Bosch Bulldog Xtreme tile chisel showcasing the specialized angled head geometry that provides an ideal prying angle for lifting floor and wall tiles.
An informative product graphic of the HS1465 tile chisel highlighting the durable steel construction with an inductive hardening process, the SDS-plus shank, and the self-sharpening edge for increased productivity.
A professional retail packaging view of the Bosch HS1465 1-1/2 inch by 10 inch SDS-plus tile chisel, indicating its compatibility with rotary hammers and high-performance material removal capabilities.
An application infographic for the Bosch Bulldog Xtreme chisel indicating that it is best used for heavy-duty demolition in masonry, brick, block, and concrete.
An action shot of a construction worker using a Bosch rotary hammer with the HS1465 tile chisel to break up a concrete ledge on an outdoor jobsite.
A professional contractor in safety gear using the Bosch SDS-plus tile chisel bit to remove ceramic wall tiles from a masonry substrate during a renovation project.
An overhead view of a worker on scaffolding using the Bosch HS1465 chisel to clear mortar and debris from a brick wall, demonstrating the tool's efficiency in vertical demolition.
BOSCH

Bosch Demolition Tile Chisel HS1465 SDS Plus 1-1/2 Inch Bulldog Xtreme Spade (10 Overall Length Self Sharpening Ceramic Thinset Mortar Prying)

Only 2 left
SKU: HS1465
$14.95 USD

Description

Bosch Promotional Logo Logout

Bosch HS1465 Bulldog™ Xtreme 1-1/2" x 10" SDS-Plus Self-Sharpening Tile Chisel Bit

The Bosch HS1465 SDS-plus Bulldog™ Xtreme self-sharpening tile chisel bit strips ceramic wall tile, floor tile, hardened thin-set mortar, and interior plaster coatings across concrete slabs and masonry backerboards. Engineered with a specialized 1-1/2-inch angled spade head forged from induction-hardened alloy steel, this high-production demolition accessory delivers up to 40% faster material removal rates compared to conventional flat chisels by prying tiles loose in large, intact pieces. Outfitted with an active self-sharpening blade profile that eliminates the need for manual regrinding downtime, an optimized 10-inch overall length that balances operational leverage with close-quarters control, and a precision-milled universal SDS-plus drive shank, it equips professional tile contractors, remodeling specialists, and demolition crews with smooth, high-impact prying throughput on rotary hammers operating in hammer-only mode.

Best Used For:

  • Ceramic and Porcelain Tile Demolition: Prying bonded ceramic wall tile, quarry pavers, and porcelain floor slabs off concrete subfloors and cement backer units in complete sections to accelerate jobsite cleanup.
  • Hardened Thin-Set and Adhesive Scraping: Chipping residual mortar ridges, cementitious adhesives, and floor leveling compounds down to bare structural concrete.
  • Heavy Plaster and Stucco Removal: Stripping thick multi-coat plaster, lath backing, sandstone veneer, and masonry render from interior wall studs and exterior block walls.

Key Performance & Safety Features

  • 40% Faster Material Removal: Optimized angled spade geometry channels percussive energy along an aggressive lifting plane to clear surfaces significantly faster than standard flat chisels.
  • Self-Sharpening Blade Profile: Continuous wear-relief engineering keeps the cutting edge sharp throughout the tool's operational lifespan, completely eliminating regrinding maintenance.
  • Specialized Low-Angle Prying Head: Angled spade design slips beneath bonded tile edges easily, popping tiles off substrates in large, manageable slabs without shattering.
  • Induction-Hardened Alloy Steel: European drop-forged alloy steel formulated to withstand intense shock loads and severe abrasive friction against masonry aggregates.
  • 10-Inch Balanced Operating Standoff: Extended 10-inch shaft gives operators ideal leverage and access when chipping along baseboards, vertical walls, and floor perimeters.
  • Universal SDS-Plus Fitment: Compatible with all commercial corded and cordless SDS-plus rotary hammers operating in dedicated chipping/hammer-only mode.

What's Included

  • (1) Bosch HS1465 SDS-plus Bulldog™ Xtreme 1-1/2 In. x 10 In. Self-Sharpening Tile Chisel Bit

Technical Specifications

Manufacturer Brand Bosch Power Tools
Model Part Number HS1465
Product Line Association Bulldog™ Xtreme Demolition Steel Series
Tool Accessory Classification SDS-plus Self-Sharpening Angled Tile Chisel Bit
Chisel Blade Width 1.500 Inches (1-1/2 in. / 38.10 mm)
Overall Tool Length 10.000 Inches (254.00 mm Total Length)
Tool Shank Interface Standard SDS-plus® Slotted Universal Quick-Change
Cutter Head Architecture Specialized Angled Spade Prying Geometry
Material Removal Rating Up to 40% Faster Removal vs Standard Tile Chisels
Edge Maintenance Technology Continuous Self-Sharpening Cutting Design
Core Metallurgy Composition Induction-Hardened Forged Alloy Tool Steel
Operational Mode Setting Hammer-Only / Chipping Mode (Disengage Rotation)
Net Assembled Tool Weight 0.670 lbs (10.72 oz / 0.304 kg)
Country of Origin Italy
Manufacturer Warranty Limited Lifetime against Manufacturer Defects
Suitable for material type Ceramic Tile, Hardened Mortar, Plaster, & Concrete

Pro-Tip: Align the offset angle of the spade flush against the floor or wall surface and let the hammer do the work; keeping the angled face parallel to the substrate forces the chisel edge directly into the adhesive bond layer, lifting tiles in broad slabs while preventing gouges in the underlying subfloor.