An angled shot shows a long, metallic gray drill bit. The upper portion of the bit has twisted helical flutes, while the lower portion is a smooth shank with grooves and indentations for a hammer drill chuck
image of sds-plus rebar cutter. The image shows a long, slender drill bit with a metallic silver finish. One end of the bit features a twisted, spiral flute design, while the other end has a multi-faceted shank for insertion into a drill.
An angled shot shows a long, metallic gray drill bit. The upper portion of the bit has twisted helical flutes, while the lower portion is a smooth shank with grooves and indentations for a hammer drill chuck
image of sds-plus rebar cutter. The image shows a long, slender drill bit with a metallic silver finish. One end of the bit features a twisted, spiral flute design, while the other end has a multi-faceted shank for insertion into a drill.
This image shows a close-up of a long, silver-colored drill bit. The top portion of the bit has prominent spiral flutes running along its length, while the lower part is a smooth, thinner shank, ending in a specialized fitting for a drill chuck.
This image displays a long, slender drill bit, predominantly silver-gray in color. The upper half features a series of distinct spiral flutes, designed for material removal, while the lower half is a smooth, cylindrical shaft ending in a textured, multi-faceted shank.
This is a long, silver metal drill bit designed for heavy-duty drilling in materials like concrete. The top portion of the shaft has tight, spiraling grooves, while the cutting tip is hollow with several sharp, durable teeth around its circular edge.
This image shows a robust, metallic-gray drill bit with a distinct design. The top half features deep, spiral flutes and a small circular hole near the tip, while the bottom half is a smooth, cylindrical shaft that narrows slightly towards a four-grooved shank at the very end.
This image features a short, stout drill bit, primarily silver-gray in color. The upper, wider section has deep, spiraling flutes and a dark, circular hole on one side, while the lower section is a narrower, smooth shaft ending in a textured, four-grooved shank.
This image displays a sturdy, short drill bit, predominantly silver-gray, with the top half featuring pronounced spiral flutes and a dark, circular hole. The lower half is a smooth, cylindrical shaft that tapers slightly to a four-grooved shank at the end.
This image shows a robust, metallic-gray drill bit with a distinct design. The upper, wider section has deep, spiraling flutes and a dark, circular hole on one side, while the lower section is a narrower, smooth shaft ending in a textured, four-grooved shank at the very end.
This image displays a short, sturdy drill bit, colored in a metallic gray, with a clear focus on its design. The top section is wider and features pronounced spiral flutes along with a circular dark hole, while the bottom section is a significantly narrower, smooth cylindrical shank that terminates in a four-grooved fitting.
This image features a metallic-gray drill bit with a distinct, short, and stout form factor. The upper part of the bit has prominent spiral flutes and a dark, circular hole, while the lower part transitions into a much narrower, smooth shank that ends in a four-grooved fitting.
BOSCH

Bosch Rotary Hammer Bits SDS Plus Rebar Cutters (Carbide Teeth Rotation Only Mode Steep Spiral Flutes Steel Reinforced Concrete Drilling)

In stock
SKU: RC2084
$24.60 USD

Size (Diameter x Length) Inches
Description

Bosch Promotional Logo Logout

Bosch SDS-Plus® Carbide Rotary Hammer Rebar Cutter Drill Bits

The Bosch SDS-Plus® rotary hammer rebar cutter drill bits bore through embedded structural steel reinforcement rods, wire mesh, and metal framing within poured concrete slabs, foundation footings, and structural pillars. Engineered to operate strictly in rotation-only mode on standard SDS-Plus rotary hammer drills, these specialized carbide-tipped core cutters slice cleanly through hidden steel obstructions that fracture standard masonry hammer bits. Outfitted with an aggressive matrix of high-grade industrial carbide cutting teeth running up to 36% faster than conventional tooling, steep spiral extraction flutes that evacuate abrasive metal filings and concrete pulverized debris rapidly, a weight-optimized vibration-dampening tapered core, and an integrated thermal-relief side port for heat dissipation and slug ejection, they equip commercial electricians, mechanical plumbers, and concrete framing contractors with rapid, jam-free steel rebar cutting speed.

Best Used For:

  • Embedded Structural Steel Rebar Penetration: Slicing through hidden Grade 40 and Grade 60 rebar and reinforcing steel grids struck during deep electrical conduit, plumbing pipe, or mechanical anchor drilling in concrete.
  • Foundation and Structural Pillar Pass-Throughs: Boring utility clearance holes through heavily reinforced commercial concrete pillars, bridge decking, and precast tilt-up panels without tool binding.
  • Reinforced Masonry and CMU Block Remediation: Core drilling through rebar-filled grout cells and concrete masonry block units without damaging standard rotary hammer motors or fracturing adjacent masonry.

Key Performance & Safety Features

  • Universal SDS-Plus Connection Shank: Locks directly into standard SDS-Plus rotary hammer chucks, eliminating the need for expensive dedicated rebar cutter power tools.
  • Premium Industrial Carbide Tooth Matrix: Heavy-duty carbide cutter geometry stays sharp through embedded steel strikes, delivering 2X longer tool life.
  • High-Velocity 36% Faster Cutting Action: Optimized tooth-to-core architecture cuts metal reinforcement bars 36% faster than standard competitor bits.
  • Steep Spiral Flute Geometry: Deep evacuation flutes pull metal friction shavings and masonry dust away from the cutting face to prevent packing.
  • Thermal-Relief Ejection Vent: Side-drilled port continuously releases high friction heat while allowing fast punch-out extraction of steel slugs.
  • Vibration-Dampening Tapered Body: Lightweight core profile stabilizes bit tracking and reduces operational vibration during high-speed rotation-only drilling.

What's Included

  • (1) Bosch SDS-Plus® Rebar Cutter Rotary Hammer Drill Bit in User-Selected Size:
    • RC2064: 3/8" Diameter x 8" Usable Length (12" Overall Length)
    • RC2084: 1/2" Diameter x 8" Usable Length (12" Overall Length)
    • RC2094: 9/16" Diameter x 8" Usable Length (12" Overall Length)
    • RC2104: 5/8" Diameter x 8" Usable Length (12" Overall Length)
    • RC2124: 3/4" Diameter x 8" Usable Length (12" Overall Length)
    • RC2144: 7/8" Diameter x 8" Usable Length (12" Overall Length)
    • RC2164: 1" Diameter x 8" Usable Length (12" Overall Length)
    • RC2168: 1-1/8" Diameter x 8" Usable Length (12" Overall Length)
    • RC2172: 1-1/4" Diameter x 8" Usable Length (12" Overall Length)
    • RC2176: 1-1/2" Diameter x 8" Usable Length (12" Overall Length)

Technical Specifications

Manufacturer Brand Bosch Power Tools
Product Line / Classification SDS-Plus® Rotary Hammer Rebar Cutter Bits
Selectable Part Numbers & Diameters RC2064 (3/8"), RC2084 (1/2"), RC2094 (9/16"), RC2104 (5/8"), RC2124 (3/4"), RC2144 (7/8"), RC2164 (1"), RC2168 (1-1/8"), RC2172 (1-1/4"), RC2176 (1-1/2")
Tool Shank Interface SDS-Plus® Slotted Universal Drive Shank
Cutting Tip Metallurgy High-Impact Industrial Sintered Tungsten Carbide Teeth
Operational Drill Mode Setting Rotation-Only Mode (Rotary Hammer Percussion Disengaged)
Usable Drilling Length 8.000 Inches (203.20 mm Usable Depth)
Overall Bit Length 12.000 Inches (304.80 mm Total Length)
Flute Debris Geometry Steep Spiral Deep-Ejection Channels
Core Wall Architecture Weight-Optimized Vibration-Dampening Tapered Body
Cooling & Ejection System Integrated Side Thermal Relief & Slug Extraction Port
Penetration Velocity Rating Up to 36% Faster Steel Penetration vs Standard Cutters
Power Tool Compatibility Corded & Cordless SDS-Plus® Rotary Hammers (Rotation Mode)
Measurement Standard Fractional Imperial (SAE) Dimensions
Product Condition Brand New OEM Original Packaging
Suitable for material type Structural Steel Rebar, Embedded Metal Rods, & Masonry

Pro-Tip: As soon as your standard SDS-Plus masonry bit strikes embedded steel rebar, stop drilling immediately and swap to the Bosch Rebar Cutter in "Rotation-Only" mode; once the steel bar is fully severed, switch back to your standard hammer bit in hammering mode to finish the concrete hole without wearing the rebar cutter unnecessarily.