Bosch Demolition Scaling Chisel HS1485 SDS Plus 1-1/2 Inch Bulldog Stubby Steel (5-3/4 OAL Heat Treated Flat Tip Tile Thinset Mortar Scraping)

Bosch HS1485 Bulldog™ 1-1/2" x 5-3/4" SDS-Plus Stubby Scaling Chisel Bit

The Bosch HS1485 SDS-plus Bulldog™ stubby scaling chisel bit strips ceramic tile, residual mortar beds, masonry scale, and concrete splatter in cramped quarters and overhead work environments. Engineered with a wide 1-1/2-inch flat scaling blade and a compact 5-3/4-inch overall length, this demolition accessory delivers superior tool control, closer working angles, and maximum prying leverage without binding or jamming. Outfitted with a proprietary heat-treated alloy steel core that withstands repeated high-frequency percussive impact shock, a precision-sharpened scraping edge that lifts bonded coatings in clean passes, and a universal SDS-plus slotted drive shank, it equips flooring contractors, tile installers, and masonry restoration crews with fast, fatigue-reducing surface preparation throughput.

Best Used For:

• Confined Space Tile and Mortar Removal: Prying bonded ceramic wall tile, floor tile, and hardened thin-set inside cramped shower stalls, small bathrooms, and under cabinetry.
• Overhead and Vertical Masonry Scaling: Scraping stucco, mortar droppings, efflorescence, and old coatings off ceilings and vertical walls with reduced operator arm fatigue.
• Concrete Formwork and Surface Prep: Chipping away dried concrete seepage, form board marks, and flashing along foundation footings, slabs, and expansion joints.

Key Performance & Safety Features

• Compact Stubby Length (5-3/4"): Brings the tool closer to the work surface, dramatically improving handling, strike accuracy, and leverage inside restricted spaces.
• Wide 1-1/2" Scaling Blade: Broad flat-tip profile maximizes surface area contact for rapid scraping, lifting, and chipping without excessive gouging.
• Reduced-Jamming Geometry: Specially tapered blade relief minimizes mechanical binding in dense thin-set mortar and masonry joints.
• Proprietary Thermal Heat-Treatment: Advanced metallurgy hardening process ensures extended blade edge retention and protects against impact fracture under severe hammer stress.
• Universal SDS-Plus Connection: Snaps securely into all standard corded and cordless SDS-plus rotary hammers operating in dedicated chipping/hammer-only mode.
• High-Leverage Scraping Angle: Low-profile shank angle allows operators to attack surface coatings at flat angles without tool motor interference.

What's Included

• (1) Bosch HS1485 SDS-plus Bulldog™ 1-1/2 In. x 5-3/4 In. Stubby Scaling Chisel Bit

Technical Specifications

Pro-Tip: Take advantage of the short 5-3/4-inch stubby body by holding the rotary hammer barrel closer to the cutting edge; this lower center of gravity delivers maximum scraping leverage under stubborn mortar beds and prevents unnecessary wrist strain during extended overhead demolition.