Studio shot of three Bosch T102H jigsaw blades arranged diagonally, featuring red T-shanks and silver bodies labeled Clean for PVC.
Diagonal view of a single Bosch T102H jigsaw blade showing the red T-shank, high carbon steel body, and ground teeth.
Close-up action shot of a blue Bosch jigsaw equipped with a T102H blade cutting through a thin white plastic sheet.
Overhead view of a Bosch T102H jigsaw blade resting on a patterned vinyl or laminate surface.
Side view of a Bosch jigsaw cutting through a white hollow PVC profile, highlighting the blade's clean cut through the material.
Studio shot of three Bosch T102H jigsaw blades arranged diagonally, featuring red T-shanks and silver bodies labeled Clean for PVC.
Diagonal view of a single Bosch T102H jigsaw blade showing the red T-shank, high carbon steel body, and ground teeth.
Close-up action shot of a blue Bosch jigsaw equipped with a T102H blade cutting through a thin white plastic sheet.
Overhead view of a Bosch T102H jigsaw blade resting on a patterned vinyl or laminate surface.
Side view of a Bosch jigsaw cutting through a white hollow PVC profile, highlighting the blade's clean cut through the material.
BOSCH

Bosch Jigsaw Blade Set T102H 4 Inch 10 TPI High Carbon Steel (3 Pack Clean for PVC Plastic Pipes Thermoplastic Substrate Layout Refills)

Only 3 left
SKU: T102H
$8.99 USD

Description

Bosch Promtional Logo Logout

Industrial High-Carbon Steel 4-Inch T-Shank Jigsaw Blade 3-Pack with 10 TPI Melt-Free Geometry for Precision PVC and Thermoplastic Conduit Processing

The Bosch T102H Clean for PVC Jigsaw Blade 3 Pack 10 TPI High Carbon Steel T-Shank for Plastics and Pipes delivers specialized thermoplastic cutting utility and exceptional material clearing efficiency across demanding commercial plumbing drainage rough-ins, electrical polymer conduit installations, and architectural plastic sheet fabrications. Engineered from premium flexible high-carbon steel blanks featuring precision-ground teeth and a taper-ground body frame, this high-performance layout tool accessory array runs smoothly through dense polyvinyl chloride, polycarbonates, and acrylic profiles without heat accumulation binding. This professional contractor solution resolves frequent material re-welding and plastic fusion drops behind the cut zone, jagged burr edges that complicate pipe joining steps, and universal shank extraction slippage errors by combining specialized friction-reducing tooth relief spacing with a 3-inch active working length depth track, a robust 10 teeth-per-inch pitch layout, and a unified single-lug T-shank interface system. Outfitted with an essential 4.0-inch total linear blade length index, a broad 1/8 in. to 1-1/4 in. practical material processing thickness range, and unified cross-platform tool holder engineering tracking across 90% of modern industrial jigsaw equipment rows, this robust plumbing refinement hardware optimizes subcontractor project turnaround metrics during wastewater line updates, custom panel profiling runs, and low-voltage tracking pathways.

Best Used For:

  • Plumbing Drainage Processing: Severing heavy Schedule 40 PVC waste lines, solid drainage lines, and technical plastic stack tubes natively single-handedly to finish structural securement loops.
  • Electrical Polymer Routing: Slicing thick industrial non-metallic conduit tracks, technical junction boxes, and storage profiles cleanly under minimum thermal warping parameters.
  • Acrylic Panel Sizing: Pre-cutting accurate circular sink profiles, corner radii cuts, and alignment layout tracks into transparent acrylic or thermoplastic sheets without edge chipping fractures.

Key Performance & Safety Features

  • Melt-Free Cutting Technology: Advanced precision taper-ground blade body frame isolates friction heat buildup natively, preventing structural plastics from re-welding behind active cutting horizons.
  • Precision-Ground Tooth Array: Symmetrically ground cutting teeth score polymer fibers cleanly before stock extraction occurs, minimizing exit burrs and time-consuming manual deburring loops.
  • High Carbon Steel Flexibility: Premium structural-grade tool carbon steel absorbs repetitive reciprocating vibration stresses completely, checking premature body fracture faults under load.
  • Universal Single-Lug T-Shank: Precision-stamped tool holder tang locks aggressively into standard quick-change jaw brackets, wiping out loose set-screw alignment anomalies entirely.
  • Optimized 10 TPI Pitch: Balanced fine-tooth configuration maximizes cutting progress velocities across a broad thickness matrix, ensuring flat tracking straightness fields.

What's Included

  • (3) Bosch T102H Clean for PVC 4-Inch High-Carbon Steel Jigsaw Blades

Technical Specifications

Specification Value
Brand Name Bosch
Model Number T102H
Product Classification Type Clean for PVC Plastic Processing Jigsaw Blade Accessory
Total Packaged Component Quantity 3 Individual Blade Pieces Per Retail Carton
Total Linear Accessory Length 4.0 in.
Active Clearing Working Length 3.0 in.
Teeth Per Inch Pitch Frequency 10 TPI Standard Pattern (Approx. 0.09 in. Pitch Metric Variant)
Primary Component Metallurgy Premium Flexible High Carbon Steel (HCS Matrix)
Tooth Engineering Build Style Precision Ground Teeth and Taper-Backed Core Profile Geometry
Connection Shank Sizing Type Standard Universal Single-Lug T-Shank Profile
Target Core Thickness Capacity 1/8 in. to 1-1/4 in. Maximum Material Depth
Target Application Substrates Polyvinyl Chloride (PVC), Non-Abrasive Thermoplastics, Solid Acrylic Sheets, Technical Polymers

Pro-Tip: When cutting wide cylindrical PVC drain pipes, disable your jigsaw engine's forward pendulum orbital stroke control completely. Keeping tool physics constrained to pure vertical strokes lets the 10 TPI ground configurations shear plastic structures smoothly without violent edge grabbing loops, guaranteeing perfectly straight joint connections cleanly.