A three-quarter angle studio shot of the orange and black Bostitch BTFP1664K 16-gauge finish nailer.
A three-quarter profile studio shot of the Bostitch BTFP1664K 16-gauge finish nailer.
A side profile studio shot of the Bostitch BTFP1664K finish nailer with a "16 GA Straight Nail" logo.
A side profile studio shot of the Bostitch BTFP1664K 16-gauge finish nailer.
A front-on profile studio shot of the Bostitch BTFP1664K finish nailer, highlighting the magazine and trigger.
A three-quarter profile studio shot of the Bostitch BTFP1664K finish nailer from a low angle.
A studio shot showing the Bostitch BTFP1664K finish nailer next to its black carrying case.
A studio shot of the black, hard-shell carrying case with the Bostitch logo.
A three-quarter angle studio shot of the orange and black Bostitch BTFP1664K 16-gauge finish nailer.
A three-quarter profile studio shot of the Bostitch BTFP1664K 16-gauge finish nailer.
A side profile studio shot of the Bostitch BTFP1664K finish nailer with a "16 GA Straight Nail" logo.
A side profile studio shot of the Bostitch BTFP1664K 16-gauge finish nailer.
A front-on profile studio shot of the Bostitch BTFP1664K finish nailer, highlighting the magazine and trigger.
A three-quarter profile studio shot of the Bostitch BTFP1664K finish nailer from a low angle.
A studio shot showing the Bostitch BTFP1664K finish nailer next to its black carrying case.
A studio shot of the black, hard-shell carrying case with the Bostitch logo.
BOSTITCH

Bostitch Finish Nailer Kit BTFP1664K 16 Gauge (1 to 2-1/2 Inch 70-120 PSI Pneumatic Crown Molding Cabinetry Trim Fastener Driving)

In stock
SKU: BTFP1664K
$150.00 USD

Description

Bostitch BTFP1664K 16-Gauge Pneumatic Finish Nailer Kit

The Bostitch BTFP1664K 16-Gauge Pneumatic Finish Nailer Kit is a professional fastening tool engineered to drive 16-gauge straight adhesive-collated nails from 1 inch to 2-1/2 inches in length at 70 to 120 PSI for precision trim and cabinetry work. Weighing 4.0 lbs with a lightweight magnesium housing, this pneumatic nailer features an oil-free maintenance-free motor, a tool-free jam release, and a selectable trigger system to solve fastener sinking challenges across interior woodworking projects.

Best Used For:

  • Crown Molding & Baseboard Installation: Securing decorative trim and baseboards cleanly without staining or splitting delicate wood stock.
  • Custom Cabinetry Assembly: Fastening face frames, cabinet parts, and interior millwork with high-holding 16-gauge finish nails.
  • Door & Window Casing Setup: Installing interior door and window trims efficiently in tight spaces and overhead orientations.

Key Performance & Safety Features

  • Oil-Free Motor Architecture: Eliminates daily maintenance routines and prevents oil staining on expensive finished workpieces.
  • Tool-Free Depth Adjustment: Allows operators to dial in precise nail depth settings quickly for clean, flush surface finishes.
  • Tool-Free Jam Clearing: Enables fast removal of jammed fasteners without requiring hex keys or auxiliary tools.
  • Selectable Actuation Trigger: Switches easily between sequential and contact bump actuation modes to match production speed requirements.
  • Lightweight Magnesium Housing: Weighs only 4.0 lbs to reduce operator arm fatigue during all-day overhead and vertical nailing shifts.
  • Adjustable Exhaust Deflector: Directs exhaust air away from the user's face and clean work surfaces.

What's Included

  • (1) BTFP1664K 16-Gauge Finish Nailer
  • (1) 1/4 in. Air Fitting
  • (1,000) 2 in. Finish Nails
  • (1) Carrying Case
  • (1) Tool Oil

Technical Specifications

Manufacturer Brand Bostitch
Model Number / Part ID BTFP1664K
Power Delivery Source Pneumatic Air Compressor
Operating Pressure Range 70 to 120 PSI
Fastener Wire Gauge 16-Gauge (16 GA)
Fastener Length Capacity 1.0 in. to 2-1/2 in.
Fastener Collation Style Straight Adhesive Collation
Magazine Load Capacity 100 Nails
Trigger Actuation Type Selectable (Sequential or Contact)
Engine Motor Design Oil-Free Maintenance-Free Motor
Tool Net Operating Weight 4.0 lbs (1.81 kg)
Product Warranty Coverage 7-Year Limited Warranty
Pro-Tip: Set your air compressor regulator between 80 and 100 PSI when driving 2-inch finish nails into hardwood trim to ensure complete countersinking without damaging the wood grain.