Bostitch Roofing Nails CR5DGAL 1-3/4 Inch Galvanized Coil Fasteners (7200 Pack 15 Degree Diamond Point Smooth Shank Asphalt Shingle Sheathing)
Couldn't load pickup availability
Bostitch CR5DGAL 1-3/4" 15° Galvanized Smooth Shank Coil Roofing Nails (7,200-Pack)
The Bostitch CR5DGAL 1-3/4-inch 15-degree galvanized smooth shank coil roofing nails fasten fiberglass asphalt shingles, waterproofing tar paper, insulation board, and metal drip edges to wood roof decks and plywood sheathing. Manufactured from high-tensile carbon steel with an electro-galvanized zinc coating, these heavy-duty fasteners resist outdoor rust and corrosion while providing high pull-through resistance with an oversized round roofing head. Outfitted with a high-penetration diamond point and a 15-degree wire weld collation engineered for rapid cycling in pneumatic roofing nailers including the Bostitch RN45B and RN46, this 7,200-count master carton equips professional roofing contractors, exterior cladding crews, and residential builders with dependable, high-volume fastening performance.
Best Used For:
- Asphalt and Fiberglass Shingle Installation: Securing multi-layer architectural and 3-tab asphalt shingles over re-roofing projects and new residential construction.
- Roof Underlayment and Tar Paper Attachment: Fastening synthetic roof felts, ice and water shields, and roll roofing without tearing the waterproof membrane.
- Rigid Foam Insulation and Cementitious Sheathing: Nailing exterior roof board insulation, plywood sheathing, and perimeter drip edges with maximum head clamping force.
Key Performance & Safety Features
- Electro-Galvanized Zinc Finish: Delivers exterior-grade corrosion resistance against rain, moisture, and ambient weathering in roofing assemblies.
- Oversized Round Roofing Head: Spreads clamping pressure evenly across shingle surfaces to prevent tear-off and wind uplift blow-through.
- High-Penetration Diamond Point: Pierces cleanly through tough fiberglass asphalt matrices and structural wood decks without splitting plywood veneers.
- 15-Degree Flexible Wire Weld Collation: Maintains rigid coil integrity in wet jobsite conditions while feeding smoothly through high-capacity magazine trays.
- High-Volume 7,200-Count Master Pack: Keeps high-production roofing crews fully supplied to minimize reloading intervals across large square layouts.
- Pneumatic Roofing Tool Compatibility: Designed specifically for seamless jam-free operation in Bostitch RN45B, RN46, and standard 15° coil roofing nailers.
What's Included
- (1) 7,200-Count Master Box of Bostitch CR5DGAL 1-3/4" 15° Galvanized Coil Roofing Nails
Technical Specifications
| Manufacturer Brand | Bostitch (Stanley Black & Decker) |
| Model Part Number | CR5DGAL |
| Fastener Product Category | 15° Wire Collated Coil Roofing Nails |
| Fastener Length Dimension | 1.750 Inches (1-3/4 in. / 44.45 mm) |
| Fastener Shank Diameter | 0.120 Inches (3.05 mm Standard Roofing Wire) |
| Head Style & Geometry | Oversized Full Round Roofing Head (0.375 in. Crown) |
| Shank Surface Profile | Smooth Shank Geometry |
| Point Geometry Style | Sharp Diamond Piercing Point |
| Fastener Wire Metallurgy | High-Tensile Carbon Steel Wire |
| Corrosion Protective Finish | Electro-Galvanized Zinc Coating (ASTM A641) |
| Collation Angle & Type | 15-Degree Welded Copper-Coated Wire Coil |
| Pneumatic Tool Compatibility | Bostitch RN45B, RN46, & Standard 15° Roofing Nailers |
| Total Master Pack Quantity | 7,200 Fasteners per Master Box (60 Rolls of 120 Nails) |
| Total Net Carton Weight | 47.57 lbs (761.12 oz / 21.58 kg) |
| Universal Product Code (UPC) | 077914004486 |
| Suitable for material type | Asphalt Shingles, Roof Deck Plywood, OSB, & Felt Paper |
Pro-Tip: Calibrate your pneumatic roofing nailer depth-of-drive so the wide nail head seats perfectly flush with the shingle surface line without cutting into the top asphalt granule coating, ensuring maximum wind-lift protection.