A studio image of the Crescent CSBTX-11072 10-inch 72-tooth circular saw blade for composite decking.
A close-up detail of the laser-cut vibration slot on the orange Crescent composite decking saw blade.
A close-up view of the Triple Chip Grind teeth and a laser-cut expansion slot on the Crescent composite decking blade.
A macro close-up shot highlighting the Razor Tipped premium carbide teeth on the Crescent composite decking blade.
The Crescent 10-inch composite decking blade shown in its clear retail packaging.
The back of the retail packaging for the Crescent composite decking blade, with feature callouts for its 50 percent smoother finish and melt-free cuts.
A marketing graphic for Crescent saw blades, showing that they are ideal for cutting composite decking and cellular PVC.
A studio image of the Crescent CSBTX-11072 10-inch 72-tooth circular saw blade for composite decking.
A close-up detail of the laser-cut vibration slot on the orange Crescent composite decking saw blade.
A close-up view of the Triple Chip Grind teeth and a laser-cut expansion slot on the Crescent composite decking blade.
A macro close-up shot highlighting the Razor Tipped premium carbide teeth on the Crescent composite decking blade.
The Crescent 10-inch composite decking blade shown in its clear retail packaging.
The back of the retail packaging for the Crescent composite decking blade, with feature callouts for its 50 percent smoother finish and melt-free cuts.
A marketing graphic for Crescent saw blades, showing that they are ideal for cutting composite decking and cellular PVC.
Crescent

Crescent Composite Saw Blade CSBTX-11072 10 Inch 72T Thin Kerf (Carbide TCG ActiveShield Melt-Free Cellular PVC Decking Miter Cutting Tool)

In stock
SKU: CSBTX-1072
$64.97 USD

Description

crescent trusted by the trades logo Logout

Crescent CSBTX-11072 10-Inch 72-Tooth Composite Decking and PVC Circular Saw Blade

The Crescent CSBTX-11072 10-Inch 72-Tooth Circular Saw Blade delivers melt-free crosscuts and miter cuts across capped composite decking boards, cellular PVC trim, vinyl siding, and polymer railings. Featuring Razor Tipped carbide teeth ground in a modified Triple Chip Grind (TCG) configuration with a 0.102-inch thin kerf, this blade eliminates melted plastic burrs, swirl marks, and edge chip-out. An advanced ActiveShield protective non-stick coating insulates the laser-cut alloy steel plate from thermal friction, gumming, and resin build-up across corded and cordless 10-inch miter saws and table saws.

Best Used For:

  • Capped Composite Decking Installation: Cutting Trex, TimberTech, and Fiberon solid-core composite planks without plastic mushrooming or frayed end caps.
  • Cellular PVC Trim & Fascia Boards: Sizing architectural PVC trim boards, soffits, and exterior window casings with a 50% smoother, paint-ready factory edge.
  • Vinyl Railing & Post Sleeve Fitting: Crosscutting extruded hollow vinyl deck railing profiles and porch balusters without material cracking or chipping.

Key Performance & Safety Features

  • Razor Tipped Carbide Teeth: High-density micro-grain carbide tips yield a 50% smoother finish on abrasive capped composites than standard framing blades.
  • Triple Chip Grind (TCG) Tooth Profile: Balanced trapezoidal and flat tooth design shears tough synthetic outer shells cleanly without gumming or melting.
  • 0.102-Inch Thin Kerf Geometry: Decreases cutting friction and rotational drag to optimize feed speed and maximize cordless saw battery efficiency.
  • ActiveShield Thermal Coating: Proprietary non-stick finish repels polymer heat buildup and resists corrosion and gummy resin adhesion.
  • Laser-Cut Harmonic Expansion Slots: Dampens motor vibration and thermal plate expansion to prevent wobble, blade burn, and circular swirl marks.

What's Included

  • (1) Crescent CSBTX-11072 10-Inch 72-Tooth Composite Decking and PVC Circular Saw Blade

Technical Specifications

Specification Detail
Model Number CSBTX-11072
Blade Diameter 10.0 in
Tooth Count 72 Teeth
Tooth Geometry Grind Triple Chip Grind (TCG)
Kerf Thickness 0.102 in
Blade Core Material Laser-Cut Hardened Alloy Steel
Cutting Tip Metallurgy Razor Tipped Premium Tungsten Carbide
Protective Thermal Coating ActiveShield Non-Stick Coating
Material Suitability Capped Composite Decking, Cellular PVC, Vinyl Railing, Acrylic, Fiberon, Trex
Vibration Dampening Laser-Cut Anti-Vibration Stabilizer Slots
Tool Platform Compatibility Corded and Cordless 10 in Miter Saws, Slide Compound Saws, and Table Saws
Pro-Tip: Maintain a steady, moderate feed rate when crosscutting dense composite deck planks; pausing mid-cut increases frictional heat and causes edge melting, while a smooth continuous stroke produces a clean factory-finish cut.