A complete product display of the Crescent APEX u-GUARD drywall anchor kit featuring a non-marring Phillips power bit, a 3/16 inch black oxide drill bit, ten gray push-in anchors, and ten zinc-plated mounting screws.
Retail packaging for the Crescent APEX 22-piece drywall anchor kit highlighting the 22-lb load capacity, the u-GUARD non-marring protection, and its suitability for impact-rated professional tools.
Close-up layout of the Crescent drywall installation set on a wooden surface, showcasing the specialized orange u-GUARD Phillips bit attached to an impact driver alongside the included anchors and drill bit.
A demonstration of the included 3/16 inch black oxide drill bit creating a precise pilot hole in a drywall surface for secure anchor placement.
An action shot showing the Crescent u-GUARD non-marring power bit being used to drive a screw through a metal bracket, demonstrating how the protective sleeve prevents surface scratches.
The Crescent non-marring Phillips bit in use with an impact driver to secure a long metal wall bracket, highlighting the enhanced control and safety of the free-spinning u-GUARD sleeve.
The back of the Crescent APEX retail package detailing the technical benefits of the u-GUARD series, including non-marring protection, a free-spinning safety sleeve, and a durable full-body bit design.
A complete product display of the Crescent APEX u-GUARD drywall anchor kit featuring a non-marring Phillips power bit, a 3/16 inch black oxide drill bit, ten gray push-in anchors, and ten zinc-plated mounting screws.
Retail packaging for the Crescent APEX 22-piece drywall anchor kit highlighting the 22-lb load capacity, the u-GUARD non-marring protection, and its suitability for impact-rated professional tools.
Close-up layout of the Crescent drywall installation set on a wooden surface, showcasing the specialized orange u-GUARD Phillips bit attached to an impact driver alongside the included anchors and drill bit.
A demonstration of the included 3/16 inch black oxide drill bit creating a precise pilot hole in a drywall surface for secure anchor placement.
An action shot showing the Crescent u-GUARD non-marring power bit being used to drive a screw through a metal bracket, demonstrating how the protective sleeve prevents surface scratches.
The Crescent non-marring Phillips bit in use with an impact driver to secure a long metal wall bracket, highlighting the enhanced control and safety of the free-spinning u-GUARD sleeve.
The back of the Crescent APEX retail package detailing the technical benefits of the u-GUARD series, including non-marring protection, a free-spinning safety sleeve, and a durable full-body bit design.
Crescent

Crescent Drywall Anchors Screws Kit CAUGB3BPH2K 22lb Capacity (u-GUARD Non-Marring Phillips Bit 3/16 Drill Fastener Installation Hardware Set)

In stock
SKU: CAUGB3BPH2K
$5.99 USD

Description

Professional 22lb Capacity Push-In Drywall Anchor Fastener Kit with Non-Marring u-GUARD Driver Sleeve

The Crescent CAUGB3BPH2K is a professional-grade 22-pound capacity push-in drywall anchor and fastener installation kit engineered to execute clean wall-mounting procedures without damaging finished surfaces. Driven by a specialized u-GUARD covered number 2 Phillips power bit featuring a free-spinning rubberized sleeve, this heavy-duty installation set prevents spinning chuck tools from scratching wall board textures or shiny metal hardware brackets. The comprehensive 22-piece mounting configuration incorporates a 3/16-inch black oxide drill bit for precise pilot paths, high-strength polymer push-in anchors, and matching zinc-plated steel screws to eliminate fastener cam-out during structural fixture anchoring on commercial jobsites.

Best Used For:

  • Finished Hardware Mounting: Securing high-end bathroom accessories or metal coat hooks cleanly without scarring surrounding painted drywall or trim rings.
  • Commercial Shelving Installation: Boring uniform 3/16-inch pilot lines and driving anchors straight into gypsum board partitions to suspend decorative display shelving.
  • High Torque Fastening: Utilizing modern impact drivers to run long mounting screws deeply into dry lining walls while protecting custom bracket finishes.

Key Performance & Safety Features

  • u-GUARD Protective Sleeve: Patented non-marring outer cover functions as a spin shield to check surface friction damage if the bit slips.
  • Free Spinning Stabilization: Floating collar mechanism allows operators to grip the active driving bit firmly to secure optimal line stability.
  • Optimized Phillips Geometry: Industrial-grade tip layout conforms cleanly to standard screw recesses to minimize stripping and bit slippage.
  • High Torque Full-Body Bit: Heavy-duty core architecture absorbs intense impact driver rotation forces without fracturing the steel driver shaft.
  • Black Oxide Hardened Coating: 3/16-inch twist drill features a premium surface treatment to maximize thermal resistance and edge retention.

What's Included

  • (1) #2 Phillips u-GUARD Impact Power Bit
  • (1) 3/16 In. Black Oxide Twist Drill Bit
  • (10) High-Strength Polymer Push-In Drywall Anchors
  • (10) Zinc-Plated #2 Phillips Mounting Screws

Technical Specifications

Brand Name: Crescent APEX
Model Number: CAUGB3BPH2K
Maximum Load Capacity: 22 lbs. Standard Shear Resistance
Drill Bit Cut Diameter: 3/16 in.
Driver Shank Size Interface: 1/4 in. Quick-Change Hex Shank
Power Drive Bit Type: Phillips Impact Power Bit
Fastener Recess Metric: #2 Phillips Head
Threaded Screw Length: 3-1/2 in.
Metallurgy Surface Finish: Black Oxide Treated Bit and Zinc Coated Screws
Drywall Anchor Type: Mechanical Push-In Wall Anchor
Protective Feature Matrix: u-GUARD Free-Spinning Non-Marring Shield
Total Hardware Piece Count: 22 Pieces Set Combination

Pro-Tip: When driving the zinc-coated fasteners into the polymer wall sleeves, hold the free-spinning u-GUARD collar directly between your thumb and forefinger. This tracking layout holds the power bit exactly perpendicular to the drywall face, maximizing directional force while checking bit wobble to preserve a pristine finish on decorative brackets.