Crescent Auger Drill Bit Set CDSASET-6 1/4 Inch Hex 6 Piece Tri Flute Kit (Self Feeding Lead Screw Impact Rated HSS Nail Embedded Wood Boring)

Crescent Nail Ripper™ CDSASET-6 6-Piece High-Speed Impact-Ready Wood Auger Bit Set

The Crescent Nail Ripper™ CDSASET-6 6-piece high-speed auger bit set bores clean, precise utility and plumbing pass-through holes across nail-embedded timber, heavy wood framing, and structural engineered beams with an effective 6-inch drilling depth. Engineered with a precision self-feeding threaded screw tip that pulls the bit continuously through dense wood grain, this triple-sharpened high-speed steel (HSS) set cuts up to 20 times faster than standard flat paddle bits while delivering 5 times longer durability when striking hidden jobsite fasteners. Outfitted with an optimized deep tri-flute channel for high-volume wood shaving evacuation, a lightweight design that is 2.5 times lighter than solid steel augers, and a 1/4-inch quick-release hex shank with a modified impact-rated torsion zone, it equips residential electricians, mechanical plumbers, and rough framing carpenters with fast, jam-resistant boring productivity.

Best Used For:

• Electrical Cable and Conduit Pass-Through Routing: Boring aligned utility penetrations through double top plates, wall studs, and floor joists for multi-conductor Romex and armored cable runs.
• Plumbing Supply Line and PEX Rough-Ins: Drilling clean, tear-free clearance holes through structural timber framing to route PEX water lines, CPVC pipe, and copper tubing.
• Nail-Embedded Remodeling and Demolition Framing: Drilling through reclaimed joists, salvaged framing lumber, and subfloors containing hidden framing nails without fracturing cutting spurs.

Key Performance & Safety Features

• Nail Ripper™ Metallurgy: Triple-sharpened high-speed steel spurs slice through embedded fasteners, providing 5X greater durability over standard wood auger bits.
• Self-Feeding Threaded Cone Point: Guided lead screw draws the bit effortlessly into dense lumber under tool rotation, significantly reducing manual feed strain.
• 20x Faster Three-Step Cutting Action: Multi-edge cutter geometry shears wood fibers rapidly, outperforming conventional spade bits up to 20 times in drilling speed.
• Deep Tri-Flute Chip Extraction: Engineered triple-flute design continuously clears heavy wood shavings to eliminate chip packing and reduce cordless motor drag.
• Modified Impact-Ready Torsion Zone: Engineered shank absorbs high torque spikes and dynamic hammer shocks from cordless impact drivers, yielding 8X longer tool life.
• 1/4-Inch Quick-Release Hex Interface: Locks securely into quick-change impact chucks and standard 3-jaw drill chucks to stop shank slipping under heavy torque.

What's Included

• (1) 6-Piece Crescent Nail Ripper™ High-Speed Wood Auger Bit Set (CDSASET-6)
• (1) Heavy-Duty Protective Storage Case

Technical Specifications

Pro-Tip: When boring through multi-layer top plates or laminated veneer lumber (LVL), keep the impact driver running at full speed without feathering the trigger; maintaining maximum RPM allows the three-step cutting spurs to shave through tough knots and hidden nails smoothly.