The Crescent Apex 10-inch 50-tooth combination saw blade, showing its carbide teeth and Active Shield coating.
The Crescent Apex 10-inch 50-tooth combination saw blade secured in its clear retail packaging.
The back of the retail packaging for the Crescent Apex saw blade, detailing features like 10X blade life and Active Shield coating.
A close-up detail of the laser-cut vibration slot on the orange Crescent Apex saw blade.
A macro close-up shot highlighting the premium Micro Grain carbide teeth on the Crescent Apex saw blade.
The Crescent Apex 10-inch combination saw blade resting on a table saw surface next to a pair of work gloves.
Crescent Apex 10-Inch 50-Tooth Combination Circular Saw Blade for Table Saws and Miter Saws Premium Micro Grain Carbide Thin Kerf for Wood Plywood OSB 2.jpg A Crescent Apex general-purpose saw blade installed on a miter saw at an active construction site with lumber framing in the background.
The Crescent Apex 10-inch 50-tooth combination saw blade, showing its carbide teeth and Active Shield coating.
The Crescent Apex 10-inch 50-tooth combination saw blade secured in its clear retail packaging.
The back of the retail packaging for the Crescent Apex saw blade, detailing features like 10X blade life and Active Shield coating.
A close-up detail of the laser-cut vibration slot on the orange Crescent Apex saw blade.
A macro close-up shot highlighting the premium Micro Grain carbide teeth on the Crescent Apex saw blade.
The Crescent Apex 10-inch combination saw blade resting on a table saw surface next to a pair of work gloves.
Crescent Apex 10-Inch 50-Tooth Combination Circular Saw Blade for Table Saws and Miter Saws Premium Micro Grain Carbide Thin Kerf for Wood Plywood OSB 2.jpg A Crescent Apex general-purpose saw blade installed on a miter saw at an active construction site with lumber framing in the background.
Crescent

Crescent Combination Saw Blade 10 Inch 50T Micro Grain Carbide (Active Shield Thin Kerf Plywood OSB Hardwood Table Miter Cutting Tool)

In stock
SKU: CSBCM-1050
$39.88 USD

Description

crescent trusted by the trades logo Logout

Crescent 10-Inch 50-Tooth Micro-Grain Carbide Combination Circular Saw Blade

The Crescent 10-Inch 50-Tooth Combination Circular Saw Blade executes precise rip cuts and clean crosscuts across framing lumber, hardwood boards, plywood subfloors, and sheet goods. Engineered with premium Micro-Grain carbide cutting teeth and an ultra-thin kerf profile, this all-purpose blade minimizes motor amp draw across corded and cordless miter saws and table saws. An advanced ActiveShield protective coating insulates the heat-treated steel plate from thermal friction, resin pitch adhesion, and gumming during continuous construction and finish carpentry operations.

Best Used For:

  • General Framing & Ripping: Making straight rip cuts along structural 2x lumber, pressure-treated framing stock, and laminated veneer lumber (LVL) on jobsite table saws.
  • Cabinetry & Sheet Goods Sizing: Crosscutting 3/4-inch hardwood plywood, OSB subfloor decking, and double-sided melamine panels without edge chip-out.
  • Trim Carpentry & Molding Miter Cuts: Slicing solid oak, maple, and pine architectural moldings cleanly on dual-bevel compound miter saws.

Key Performance & Safety Features

  • Micro-Grain Carbide Teeth: High-density impact-resistant carbide formula delivers up to 10X longer cutting edge retention compared to standard steel blades.
  • Thin Kerf Geometry: Reduces rotational drag and material waste to maximize cutting feed speed and extend cordless tool battery runtime.
  • ActiveShield Thermal Coating: Industrial non-stick surface treatment reduces friction heat build-up and prevents pitch and gum loading.
  • Laser-Cut Harmonic Vibration Slots: Precision-cut expansion vents absorb operational vibration and dampen blade noise to ensure straight, chatter-free cuts.
  • 50-Tooth Combination Configuration: Groups alternating top bevel and raker teeth to balance rapid chip clearance during rips with fine crosscut shearing.

What's Included

  • (1) Crescent 10-Inch 50-Tooth Micro-Grain Carbide Combination Circular Saw Blade

Technical Specifications

Specification Detail
Blade Diameter 10.0 in
Tooth Count 50 Teeth
Blade Type Combination (Rip and Crosscut)
Kerf Profile Thin Kerf Design
Plate Material Laser-Cut Hardened Alloy Steel
Cutting Tip Material Micro-Grain Tungsten Carbide
Protective Coating ActiveShield Non-Stick Coating
Tool Platform Compatibility Corded & Cordless 10 in Table Saws and Miter Saws
Material Suitability Hardwoods, Softwoods, Plywood, OSB, LVL, Melamine, Wet/Treated Lumber
Vibration Dampening Laser-Cut Anti-Vibration Stabilizer Slots
UPC Identifier 697099356639
Pro-Tip: Set your table saw blade height so only half the carbide tooth extends above the workpiece thickness; this optimizes the cutting shear angle to reduce splintering in double-sided melamine and plywood veneers.