A three-quarter studio shot of the Lufkin Control Series 10m/33' tape measure (L1035CME) with the yellow dual-sided blade partially extended, showing metric markings.
A three-quarter studio shot of the Crescent Lufkin Control Series 10m/33' tape measure (L1035CME), highlighting its rugged black and red case, red lock button, and finger brake.
The Crescent Lufkin Control Series 10m/33' tape measure (L1035CME) shown in its official retail blister pack packaging, which highlights features like "11 FOOT STANDOUT" and "FINGER TIP CONTROL."
A rear view of the Lufkin Control Series tape measure, showing the black metal belt clip, red case accents, and the 3.25-inch base measurement.
A front-on studio shot of the Lufkin Control Series tape measure, showing the yellow blade and finger brake slot.
A top-down studio shot of the Lufkin Control Series tape measure, showing the black lock button and the 360-degree end hook.
A three-quarter studio shot of the Lufkin Control Series 10m/33' tape measure (L1035CME) with the yellow dual-sided blade partially extended, showing metric markings.
An informational graphic illustrating "FINGER TIP CONTROL," showing a gloved finger pressing the yellow brake on the underside of a tape measure.
An informational graphic illustrating the "12 FOOT STANDOUT" of a tape measure blade.
An informational graphic with an orange background that reads "DURABLE COATING" and shows a close-up of the tape blade with "3X LIFE."
An informational graphic with an orange background that reads "VERSATILE 360° END HOOK" with a rotating arrow.
A three-quarter studio shot of the Lufkin Control Series 10m/33' tape measure (L1035CME) with the yellow dual-sided blade partially extended, showing metric markings.
A three-quarter studio shot of the Crescent Lufkin Control Series 10m/33' tape measure (L1035CME), highlighting its rugged black and red case, red lock button, and finger brake.
The Crescent Lufkin Control Series 10m/33' tape measure (L1035CME) shown in its official retail blister pack packaging, which highlights features like "11 FOOT STANDOUT" and "FINGER TIP CONTROL."
A rear view of the Lufkin Control Series tape measure, showing the black metal belt clip, red case accents, and the 3.25-inch base measurement.
A front-on studio shot of the Lufkin Control Series tape measure, showing the yellow blade and finger brake slot.
A top-down studio shot of the Lufkin Control Series tape measure, showing the black lock button and the 360-degree end hook.
A three-quarter studio shot of the Lufkin Control Series 10m/33' tape measure (L1035CME) with the yellow dual-sided blade partially extended, showing metric markings.
An informational graphic illustrating "FINGER TIP CONTROL," showing a gloved finger pressing the yellow brake on the underside of a tape measure.
An informational graphic illustrating the "12 FOOT STANDOUT" of a tape measure blade.
An informational graphic with an orange background that reads "DURABLE COATING" and shows a close-up of the tape blade with "3X LIFE."
An informational graphic with an orange background that reads "VERSATILE 360° END HOOK" with a rotating arrow.
Lufkin

Crescent Lufkin Tape Measure L1035CME 35 Foot 10M Control Series (1-3/16 Inch Dual Sided SAE Metric Blade 14 Foot Reach Finger Brake Steel Hook)

In stock
SKU: L1035CME
$21.29 USD

Description

Crescent Lufkin Logo logout

Crescent Lufkin L1035CME 35-Foot / 10M Control Series Tape Measure

The Crescent Lufkin L1035CME 35-Foot / 10M Control Series Tape Measure is a heavy-duty layout measuring tool engineered for one-person framing, masonry, and overhead conduit layout work. Featuring a 1-3/16 inch wide steel blade with a matte nylon glare-resistant coating, this dual-sided fractional SAE and metric tape measure delivers a 14-foot unassisted blade reach. Outfitted with an anti-pinch manual finger brake port for controlled retraction speed, a 360-degree multi-catch end hook, a wide lock button guarded by rubberized overmold rails, a steel tether loop, and a 6-point dual-material housing drop-tested 50 times from 10 feet, this 1-7/10 pound tape measure executes jobsite dimensional verification.

Best Used For:

  • Solo Commercial Framing & Subfloor Layout: Extending long 14-foot horizontal blade runs unassisted to measure wall plates, joist spans, and subfloor panels.
  • Overhead Conduit & Drop-Ceiling Measuring: Reading vertical metric and fractional imperial scales on the blade underside during overhead mechanical installations.
  • High-Elevated Work Protection & Scribing: Securing lanyard carabiners to the steel tether anchor for OSHA fall protection compliance when working on scaffolding.

Key Performance & Safety Features

  • 14-Foot Unassisted Blade Reach: Rigid 1-3/16 inch wide steel blade profile supports extended reach across open spans without collapsing.
  • Anti-Pinch Under-Case Finger Brake: Ergonomic underside opening lets operators regulate blade retraction speed directly with a finger without pinch hazards.
  • Dual-Sided SAE / Metric Print Geometry: Features extra-large horizontal scale print on top and a vertical quick-read scale on the underside.
  • 360-Degree Multi-Catch End Hook: Wide four-rivet catch hook grips material edges securely from the top, bottom, or side angles.
  • Matte Nylon Protective Blade Coating: Non-reflective blade film protects printed markings against abrasion, dirt, and sun glare readability issues.
  • 6-Point 1-Story Drop-Tested Housing: Rugged dual-material case withstands over 50 impacts from 10-foot heights onto concrete surfaces.

What's Included

  • (1) Crescent Lufkin L1035CME 35-Foot / 10M Control Series Dual-Sided Tape Measure

Technical Specifications

Brand / Manufacturer Crescent Lufkin
Model / Part Number L1035CME
Product Line / Series Control Series
Total Tape Blade Length 35 ft. / 10 Meters
Blade Nominal Width 1-3/16 in. (30.16 mm)
Unassisted Blade Standout / Reach 14 ft. (4.26 Meters)
Measurement Format Standards Dual-Sided Fractional SAE (Imperial) & Metric
Blade Finish Coating Matte Non-Glare Nylon Protective Film
Retraction Control System Manual Anti-Pinch Finger Brake & Top Lock Button
End Hook Catch Geometry 360-Degree Multi-Angle Quad-Rivet Steel Hook
Housing Protection Material 6-Point Dual-Material High-Impact Case with Rubber Overmold
Fall Protection Anchor Feature Integrated Steel Tether Point (Also Functions as Scribing Slot)
Net Item Shipping Weight 1-7/10 lbs (1.700 lbs / 0.771 kg)
Pro-Tip: Lightly press your index finger against the exposed blade underside using the anti-pinch finger port when retracting extended 35-foot runs; dampening return momentum prevents the 360-degree steel hook from slamming against the case and shearing rivets.