DeWalt Cut Off Saw Kit DCS692X2 9 Inch 60V max FLEXVOLT Brushless Power Cutter (6600 RPM Two 9.0Ah Batteries 3-1/4 Depth Water Feed Concrete Rebar)

DeWalt DCS692X2 FLEXVOLT® 60V MAX* 9" Cordless Brushless Cut-Off Saw Kit

The DeWalt DCS692X2 FLEXVOLT® 60V MAX* 9-inch cordless brushless cut-off saw kit executes rapid, single-pass scoring and severed cuts through reinforced concrete slabs, masonry pavestones, structural steel, cast iron pipe, and rebar. Driven by a high-efficiency brushless motor that generates up to 6,600 no-load RPM and powered by two included 9.0Ah lithium-ion batteries, this heavy-duty power cutter delivers gas-free cutting throughput with an impressive 3-1/4-inch maximum cut depth. Outfitted with an OSHA Table 1 compliant dual-sided water delivery system for active crystalline silica dust suppression, an all-metal direct-drive transmission that eliminates belt tension maintenance, a rotatable 5-position blade guard, and a 3-position auxiliary front handle, it equips concrete contractors, commercial pipefitters, and demolition crews with superior maneuverability across vertical and horizontal cut planes.

Best Used For:

• Reinforced Concrete Slab Scoring and Expansion Joints: Slicing straight 3-1/4-inch deep control joints and perimeter relief cuts in cured concrete slabs, walkways, and foundation walls.
• Interlocking Pavestone and Masonry Block Cutting: Trimming concrete pavers, CMU cinder blocks, clay landscape bricks, and retaining wall stones in residential and commercial hardscaping.
• Structural Steel and Rebar Severing: Cutting thick rebar dowels, metal conduit, black iron gas pipe, and structural steel beams on remote utility sites without fuel mixing or cord limits.

Key Performance & Safety Features

• FLEXVOLT® 60V Brushless Motor: Delivers an aggressive 6,600 RPM blade speed with advanced power output, maximizing runtime and eliminating carbon brush replacements.
• Deep 3-1/4" Single-Pass Capacity: 9-inch wheel diameter cuts up to 3.250 inches deep, easily slicing through standard pavestones and structural rebar in single-pass setups.
• OSHA Table 1 Dust Compliance: Integrated dual-sided water feed system channels pressurized water directly to both sides of the blade for instant airborne silica dust suppression.
• Maintenance-Free All-Metal Drivetrain: Reliable gear-driven transmission completely eliminates drive belt slippage, routine tensioning adjustments, and belt replacement downtime.
• Sealed Weather-Resistant Battery Enclosure: Heavy-duty latched battery door shields installed FLEXVOLT power packs from water spray, fine concrete slurry, and abrasive jobsite dust.
• Rotatable 5-Position Blade Guard: Quick-adjusting wheel guard allows operators to optimize cutting angles and maintain clear sightlines when working in confined trench spaces.
• Heavy-Load Power Indicator: Real-time visual feedback light notifies the operator when optimal feed pressure is applied, preventing motor bog-down and maximizing battery life.

What's Included

• (1) DeWalt DCS692 60V MAX* 9 In. Cordless Brushless Cut-Off Saw
• (2) DeWalt DCB609 FLEXVOLT® 20V/60V MAX* 9.0Ah Lithium-Ion Batteries
• (1) DeWalt Fast Battery Charger
• (1) DeWalt DWAFV8918 9 In. Ceramic Metal Cut-Off Wheel
• (1) DeWalt DWAFV8900 9 In. Diamond Masonry Cutting Wheel

Technical Specifications

Pro-Tip: Connect a portable pressurized water tank to the dual-sided brass hose coupling before scoring concrete; continuous low-pressure water flow not only satisfies OSHA Table 1 airborne silica standards but also flushes abrasive slurry out of the kerf to keep diamond wheel segments cutting at peak efficiency.