Three quarter perspective of a DEWALT DWE43214N corded electric angle grinder displaying the yellow and black composite housing, silver aluminum gear case, attached side handle, and protective wheel guard.
Left side view profile of a DEWALT 5 inch electric angle grinder highlighting the paddle switch, brushless motor label, 10500 RPM badging, and power cable strain relief jacket.
Rear angled studio perspective of a DEWALT DWE43214N electric angle grinder displaying the slim barrel grip profile, side handle alignment, and rear ventilation grid openings.
Product infographic of a DEWALT DWE43214N angle grinder calling out key technical specifications including a 5.3 lbs weight, 13.6 inch length, 13 amp brushless motor, and electronic E-CLUTCH safety system.
Side view of a DEWALT DWE43214N brushless angle grinder set beneath a high contrast commercial layout box outlining included items such as the type 27 guard, side handle, flanges, and hex key.
Clean right side flat profile view of the DEWALT 5 inch corded angle grinder highlighting the high-visibility yellow body casing, black rubber overmolded grips, and bottom wheel guard silhouette.
Alternative three quarter studio profile shot of a yellow and black DEWALT DWE43214N corded angle grinder with its attached side handle and safety wheel guard resting flat against a white background canvas.
Extreme macro close up detailing the integrated lanyard ready connection point loop located securely at the rear electrical cord housing base of a DEWALT industrial power tool.
Close up top view perspective of the variable speed dial module and a printed conversion chart mapping selector steps 1 through 5 directly to respective operational RPM increments up to 10500.
Top view macro shot of a DEWALT angle grinder body detailing the textured black rubber grip pad, debossed brushless motor branding text, and an active green LED electronic indicator light.
A metal fabricator wearing a safety face shield and protective gloves operates a DEWALT angle grinder on a steel pipe workpiece under a graphic text overlay reading 2-Stage Trigger for Safe Operation.
A close-up view of the rear strain relief section on a yellow DEWALT hand tool highlighting the integrated lanyard ready anchorage loop beneath a text banner describing the integrated lanyard attachment.
A split side-by-side comparison infographic showing a green status light on the left labeled ON and a red status light on the right labeled OFF above text reading Power-Loss Reset No-Volt Release During Shutdown.
A close-up shot of a trade professional grinding industrial metal with a DEWALT power tool while sparks scatter across a workspace beneath a graphic layout title reading High-Power 13 Amp Motor Delivers 10,500 RPM.
Wide angle perspective inside a metal fabrication shop showing a contractor standing at a heavy steel workbench station operating a 5 inch corded electric grinder to smooth down a round cylinder part.
Action photograph of a fabrication worker utilizing a DEWALT brushless angle grinder on a metal pipe over a workshop table showing bright sparks flying off the abrasive grinding wheel.
DEWALT® Product Guides - Grinder Basics promotional how to video
Three quarter perspective of a DEWALT DWE43214N corded electric angle grinder displaying the yellow and black composite housing, silver aluminum gear case, attached side handle, and protective wheel guard.
Left side view profile of a DEWALT 5 inch electric angle grinder highlighting the paddle switch, brushless motor label, 10500 RPM badging, and power cable strain relief jacket.
Rear angled studio perspective of a DEWALT DWE43214N electric angle grinder displaying the slim barrel grip profile, side handle alignment, and rear ventilation grid openings.
Product infographic of a DEWALT DWE43214N angle grinder calling out key technical specifications including a 5.3 lbs weight, 13.6 inch length, 13 amp brushless motor, and electronic E-CLUTCH safety system.
Side view of a DEWALT DWE43214N brushless angle grinder set beneath a high contrast commercial layout box outlining included items such as the type 27 guard, side handle, flanges, and hex key.
Clean right side flat profile view of the DEWALT 5 inch corded angle grinder highlighting the high-visibility yellow body casing, black rubber overmolded grips, and bottom wheel guard silhouette.
Alternative three quarter studio profile shot of a yellow and black DEWALT DWE43214N corded angle grinder with its attached side handle and safety wheel guard resting flat against a white background canvas.
Extreme macro close up detailing the integrated lanyard ready connection point loop located securely at the rear electrical cord housing base of a DEWALT industrial power tool.
Close up top view perspective of the variable speed dial module and a printed conversion chart mapping selector steps 1 through 5 directly to respective operational RPM increments up to 10500.
Top view macro shot of a DEWALT angle grinder body detailing the textured black rubber grip pad, debossed brushless motor branding text, and an active green LED electronic indicator light.
A metal fabricator wearing a safety face shield and protective gloves operates a DEWALT angle grinder on a steel pipe workpiece under a graphic text overlay reading 2-Stage Trigger for Safe Operation.
A close-up view of the rear strain relief section on a yellow DEWALT hand tool highlighting the integrated lanyard ready anchorage loop beneath a text banner describing the integrated lanyard attachment.
A split side-by-side comparison infographic showing a green status light on the left labeled ON and a red status light on the right labeled OFF above text reading Power-Loss Reset No-Volt Release During Shutdown.
A close-up shot of a trade professional grinding industrial metal with a DEWALT power tool while sparks scatter across a workspace beneath a graphic layout title reading High-Power 13 Amp Motor Delivers 10,500 RPM.
Wide angle perspective inside a metal fabrication shop showing a contractor standing at a heavy steel workbench station operating a 5 inch corded electric grinder to smooth down a round cylinder part.
Action photograph of a fabrication worker utilizing a DEWALT brushless angle grinder on a metal pipe over a workshop table showing bright sparks flying off the abrasive grinding wheel.
DEWALT® Product Guides - Grinder Basics promotional how to video
DEWALT

DEWALT Angle Grinder DWE43214N 5 Inch Brushless Paddle Switch Electric Corded 10500 RPM Tool Kickback Brake No Lock On Metal Surface Grinding Set

In stock
SKU: DWE43214N
$279.00 USD

Description

Authorized Dealer Badge DEWALT logout

Brushless 10500 RPM Surface Preparation Grid for Industrial Metal Cutting

The DEWALT DWE43214N 5 Inch Angle Grinder delivers a heavy-duty corded abrasive processing system engineered to serve as a primary steel cutting and weld-smoothing station for high-stress commercial metal fabrication. Powered by a high-efficiency brushless motor spinner maintaining up to 10500 RPM, this electric hand tool resolves maintenance-related downtime by eliminating mechanical carbon brush replacements. The specialized configuration integrates a responsive paddle switch with a no lock-on safety mechanism and an internal kickback brake matrix, instantly killing tool rotation when severe blade pinching, binding, or unexpected jobsite electrical loss events are encountered.

Best Used For:

  • Industrial Weld Smoothing: Grinding down heavy structural steel bead seams flush across commercial construction frameworks.
  • Thick Structural Steel Cutting: Slitting through thick carbon steel pipes, metal framing studs, and dense iron rebar rods efficiently.
  • High-Elevation Metal Fabrication: Operating safely on elevated scaffolding platforms using the integrated lanyard ready anchorage port.

Key Performance & Safety Features

  • Brushless Motor System: Advanced brushless execution delivers optimized energy conversion and avoids regular brush changes.
  • Rapid Mechanical Braking: Internal braking mechanism stops grinding wheel inertia in two seconds or less upon paddle switch release.
  • Electronic Kickback Brake: Activates immediately with maximum counter force during pinch or stall events to halt motor output.
  • Power-Loss Reset Protection: No-volt release trigger switch layout blocks accidental startups after grid power outages occur.
  • Lanyard Ready Connection: Features an integrated lanyard attachment point at the base to conform with drop-prevention safety protocols.
  • No Lock-On Switch Configuration: Safety paddle interface lacks latching locks to guarantee immediate shutoff when manual finger pressure ceases.

What's Included

  • 1 DEWALT DWE43214N 5 Inch Angle Grinder
  • 1 Heavy-Duty Side Handle Attachment
  • 1 Adjusting Hex Key Wrench
  • 1 Inner Flange Backing Nut
  • 1 Outer Flange Lock Nut
  • 1 5 Inch Type 27 Safety Guard

Technical Specifications

Brand Name DEWALT
Model Number DWE43214N
UPC Barcode Reference 885911538602
Product Classification Type Angle Grinder
Power Configuration Corded Electric Power Source
Motor Engineering Profile Long-Lasting Brushless Motor
Maximum Speed Velocity 10500 RPM
Wheel Diameter Base Capacity 5 Inches
Trigger Switch Format Paddle Switch with No Lock-On
Total Assembly Piece Count 5 Pieces
Assembled Chassis Length 16.89 Inches
Assembled Chassis Width 6.14 Inches
Assembled Chassis Height 5.10 Inches
Assembled Net Weight 6.75 lbs
Pro-Tip: Before beginning any heavy metal stock grinding sequence, verify that the Type 27 safety guard orientation completely shields your hand trajectory. Always let the 10500 RPM motor achieve peak rotational velocity before making surface contact to guarantee that the electronic E-CLUTCH functions correctly during a binding event.