A three-quarter front studio view of the DEWALT DCS383B 20V MAX XR brushless 7-1/4-inch metal cutting circular saw bare tool against a white background, displaying its robust black protective blade guard with integrated mesh vents, silver lower guard window, and a textured black auxiliary front handle grip.
An technical feature infographic diagram mapping out the primary components of the DEWALT metal cutting circular saw. Prominent yellow indicator lines call attention to the integrated top chip collector bin, a 7-1/4-inch circular saw blade acceptance channel, an adjustable 2-5/8 inch maximum depth of cut capacity, a safety electronic brake system, a built-in Tool Connect+ tracking module, and the internal brushless motor.
A rear three-quarter studio perspective of the cordless metal cutting saw on a white background, showcasing the yellow motor casing, the ergonomic rear handle grip with integrated safety trigger switch, and the open 20V battery dock channel terminal.
A direct right-side profile studio view of the cordless structural metal circular saw, detailing the technical specification data plate, the centralized black motor cap embossed with the yellow DEWALT 20V XR brand badge, and a silver depth adjustment locking lever.
A duplicate front three-quarter view of the 7-1/4-inch industrial circular saw bare tool over a white background, highlighting a blue Tool Connect+ network signal icon overlaying the rear grip handle assembly.
A three-quarter front studio view of the DEWALT metal cutting circular saw shown from the opposing side profile, focusing attention onto the heavy-duty steel base shoe plate and the lower mechanical blade guard tracking shroud.
A general elevated studio view of the 20V MAX brushless circular saw, highlighting its low-profile head design, cast aluminum alignment housing, and composite structural ergonomics against a crisp white background.
A close-up action photo of a metal fabricator wearing high-grip technical work gloves using the cordless circular saw to section a thick rectangular steel box tube. A bold yellow graphic banner across the bottom explains the functionality of the safety electronic brake engineered to stop the blade in under 1 second.
An on-site construction view of a worker using the 7-1/4-inch brushless circular saw to rip across a large panel of corrugated steel floor decking on an outdoor sawhorses table. A bottom technical panel notes high-volume efficiency tracking up to 105 structural feet of corrugated decking per single battery charge cycle.
An action view of a commercial builder operating the cordless saw to plunge-cut through a nested structural steel channel stud. A lower yellow and black text block calls out jobsite productivity data, showing capacity tracking for up to 214 cuts of 20-gauge steel studs per battery charge.
An action photo showing a commercial fabricator operating the DEWALT 20V MAX XR cordless circular saw with an illuminated outline to cut through an industrial steel floor grate grating pattern. The lower yellow marketing panel text reads Our Most Powerful 20V MAX* Metal Cutting Circular Saw, highlighting high-torque brushless performance under structural demolition conditions.
DEWALT XR 20V brushless metal cutting circular saw video. Product DCS383B, DCS383H1, DCS383 shown, features highlighted in this promotional video
A three-quarter front studio view of the DEWALT DCS383B 20V MAX XR brushless 7-1/4-inch metal cutting circular saw bare tool against a white background, displaying its robust black protective blade guard with integrated mesh vents, silver lower guard window, and a textured black auxiliary front handle grip.
An technical feature infographic diagram mapping out the primary components of the DEWALT metal cutting circular saw. Prominent yellow indicator lines call attention to the integrated top chip collector bin, a 7-1/4-inch circular saw blade acceptance channel, an adjustable 2-5/8 inch maximum depth of cut capacity, a safety electronic brake system, a built-in Tool Connect+ tracking module, and the internal brushless motor.
A rear three-quarter studio perspective of the cordless metal cutting saw on a white background, showcasing the yellow motor casing, the ergonomic rear handle grip with integrated safety trigger switch, and the open 20V battery dock channel terminal.
A direct right-side profile studio view of the cordless structural metal circular saw, detailing the technical specification data plate, the centralized black motor cap embossed with the yellow DEWALT 20V XR brand badge, and a silver depth adjustment locking lever.
A duplicate front three-quarter view of the 7-1/4-inch industrial circular saw bare tool over a white background, highlighting a blue Tool Connect+ network signal icon overlaying the rear grip handle assembly.
A three-quarter front studio view of the DEWALT metal cutting circular saw shown from the opposing side profile, focusing attention onto the heavy-duty steel base shoe plate and the lower mechanical blade guard tracking shroud.
A general elevated studio view of the 20V MAX brushless circular saw, highlighting its low-profile head design, cast aluminum alignment housing, and composite structural ergonomics against a crisp white background.
A close-up action photo of a metal fabricator wearing high-grip technical work gloves using the cordless circular saw to section a thick rectangular steel box tube. A bold yellow graphic banner across the bottom explains the functionality of the safety electronic brake engineered to stop the blade in under 1 second.
An on-site construction view of a worker using the 7-1/4-inch brushless circular saw to rip across a large panel of corrugated steel floor decking on an outdoor sawhorses table. A bottom technical panel notes high-volume efficiency tracking up to 105 structural feet of corrugated decking per single battery charge cycle.
An action view of a commercial builder operating the cordless saw to plunge-cut through a nested structural steel channel stud. A lower yellow and black text block calls out jobsite productivity data, showing capacity tracking for up to 214 cuts of 20-gauge steel studs per battery charge.
An action photo showing a commercial fabricator operating the DEWALT 20V MAX XR cordless circular saw with an illuminated outline to cut through an industrial steel floor grate grating pattern. The lower yellow marketing panel text reads Our Most Powerful 20V MAX* Metal Cutting Circular Saw, highlighting high-torque brushless performance under structural demolition conditions.
DEWALT XR 20V brushless metal cutting circular saw video. Product DCS383B, DCS383H1, DCS383 shown, features highlighted in this promotional video
DEWALT

DEWALT DCS383B 7 1/4 Inch Metal Cutting Circular Saw (20V MAX Brushless 1400 MWO 3900 RPM Cordless Steel Stud Decking Bare Tool)

In stock
SKU: DCS383B
$479.00 USD

Description

Authorized Dealer Badge DEWALT logout

Streamline Demanding Jobsite Metal Fabrications with High-Efficiency Brushless Cutting Control

The DEWALT DCS383B 20V MAX XR® 7-1/4-Inch Metal Cutting Circular Saw is a high-torque cordless tool engineered to deliver up to 1,400 MWO of industrial cutting power and an operating speed of 3,900 RPM. Powered by an advanced brushless motor, this structural saw provides a maximum 2-5/8 inch depth of cut to crosscut thick steel framing components, strut channels, and sheet metals quickly. Featuring an integrated chip collector and Tool Connect™ smart asset tracking, this bare tool optimizes trade productivity, clean air compliance, and tool safety on demanding commercial jobsites.

**Battery and charger sold separately.

Best Used For:

  • Steel Stud Framing: Making rapid crosscuts through up to 214 high-volume 20-gauge steel studs on a single battery charge lifecycle.
  • Corrugated Metal Decking: Cutting straight layout paths through up to 105 feet of dense corrugated metal roof and floor decking materials.
  • Industrial Strut Channels: Trimming heavy structural metal rods, unistrut segments, and metal utility conduits with complete cold-cutting precision.

Key Performance & Safety Features

  • Brushless Motor Technology: Generates up to 1,400 MWO of heavy-duty cutting output to conquer dense industrial metal materials smoothly.
  • Integrated Metal Chip Collector: Built-in collection container captures hot swarf, shavings, and debris automatically to maintain a clean workspace line of sight.
  • Rapid Electronic Brake: Maximizes operator safety by halting cutting blade rotation in less than 1.0 second after the control trigger is released.
  • Tool Connect™ Technology: Provides deep asset visibility, utilization analysis, tool geo-location, and secure inventory lockouts through the DEWALT® Site Manager software app.
  • Extended Deep-Cut Architecture: Delivers a versatile 2-5/8 inch cutting depth capacity to clear common dimensional metal pieces in a single pass.

What's Included

  • (1) DCS383 20V MAX* XR® 7-1/4 in. Metal Cutting Circular Saw (Tool Only)
  • (1) DWAM71448 7-1/4 in. 48T Cermet-Tipped Metal Cutting Saw Blade
  • (1) Blade Change Hex Wrench

Technical Specifications

Product Type: Circular Saw
Voltage Platform: 20V MAX
Cordless or Corded: Cordless
Power Source: Battery
Tool Only (Bare Tool): Yes
Motor Type: Brushless
Total Number of Batteries: 0
Charger Included: No
Maximum Power Output: 1,400 MWO
Maximum Speed: 3,900 RPM
Blade Diameter Sizing: 7-1/4 in
Maximum Depth of Cut: 2-5/8 in
Assembled Product Dimensions: