A full side profile studio shot of the DeWalt DWFP72155 15-gauge angled finish nailer.
A three-quarter angle studio shot of the DeWalt DWFP72155 15-gauge angled finish nailer, highlighting the angled magazine and air inlet.
A feature callout diagram of the DeWalt DWFP72155 nailer, highlighting its tool-free jam release, small nose, depth adjustment wheel, and selectable trigger.
A close-up studio shot of the trigger and selectable trigger switch on the DeWalt DWFP72155 finish nailer.
A three-quarter angle studio shot of the DeWalt DWFP72155 finish nailer, showing the "Precision Point" logo on the nose.
An action shot of a worker in safety glasses using the DeWalt DWFP72155 finish nailer to install white crown molding on a ceiling.
An action shot of a worker using the DeWalt DWFP72155 angled finish nailer to install wooden door trim.
DEWALT® FLEXVOLT® The Power of Freedom: Skyscraper promotional video
A full side profile studio shot of the DeWalt DWFP72155 15-gauge angled finish nailer.
A three-quarter angle studio shot of the DeWalt DWFP72155 15-gauge angled finish nailer, highlighting the angled magazine and air inlet.
A feature callout diagram of the DeWalt DWFP72155 nailer, highlighting its tool-free jam release, small nose, depth adjustment wheel, and selectable trigger.
A close-up studio shot of the trigger and selectable trigger switch on the DeWalt DWFP72155 finish nailer.
A three-quarter angle studio shot of the DeWalt DWFP72155 finish nailer, showing the "Precision Point" logo on the nose.
An action shot of a worker in safety glasses using the DeWalt DWFP72155 finish nailer to install white crown molding on a ceiling.
An action shot of a worker using the DeWalt DWFP72155 angled finish nailer to install wooden door trim.
DEWALT® FLEXVOLT® The Power of Freedom: Skyscraper promotional video
DEWALT

DeWalt Finish Nailer DWFP72155 15 Gauge (1-1/4 to 2-1/2 Inch Precision Point Oil Free Motor DA Style Angled Cabinetry Trim Fastener)

Only 1 left
SKU: DWFP72155
$229.00 USD

Description

Authorized Dealer Badge DEWALT logout

DeWalt DWFP72155 15-Gauge DA Style Precision Point Angled Finish Nailer

The DeWalt DWFP72155 15-Gauge DA Style Precision Point Angled Finish Nailer is a pneumatic carpentry fastening tool engineered to drive 15-gauge DA style angled finish nails from 1-1/4 inches to 2-1/2 inches in length at a minimum 70 PSI operating pressure. Featuring a narrow Precision Point nosepiece that fires without compressing the contact trip, this 3.7-pound aluminum nailer solves line-of-sight visibility challenges on detailed crown molding, baseboards, and custom cabinetry. Equipped with an oil-free maintenance-free motor, an integrated air blower, and a tool-free depth-of-drive adjustment, this angled finishing tool prevents surface marring across professional interior trim installations.

Best Used For:

  • Crown Molding & Architectural Trim Setup: Placing 15-gauge angled nails precisely into tight wall-to-ceiling corners without compressing a bulky safety contact trip.
  • Custom Cabinetry & Face Frame Assembly: Fastening thick hardwood trim and face frames securely using high-holding 34-degree DA style angled fasteners.
  • Baseboard & Door Casing Installation: Executing clean finish nailing along baseboards and door jambs while using the integrated air blower to clear sawdust from cut lines.

Key Performance & Safety Features

  • Precision Point Technology: Ultra-small nosepiece design improves placement accuracy and fires without requiring contact trip actuation pressure.
  • Oil-Free Motor System: Maintenance-free engine design eliminates daily oiling routines and prevents oil stains on finished wood surfaces.
  • Tool-Free Depth-of-Drive Adjustment: Integrated detent wheel allows precise countersinking adjustment of nail heads across varying wood densities.
  • Tool-Free Jam Clearing Mechanism: Enables rapid removal of jammed fasteners to keep installation workflows moving without extra hand tools.
  • Integrated Onboard Air Blower: Press-button air nozzle clears dust and wood debris instantly from the immediate work surface.
  • 16-Inch On-Center Flip Gauge: Built-in retractable measuring gauge measures exactly 16 inches from nose tip to speed up stud locating during wall trim installation.

What's Included

  • (1) DWFP72155 15-Gauge DA Style Angle Finish Nailer
  • (1) 1/4 in. Swivel Air Fitting
  • (1) Heavy-Duty Carrying Case

Technical Specifications

Manufacturer Brand DEWALT
Model Number / Part ID DWFP72155
Power Delivery Source Pneumatic Air Compressor Driven
Fastener Wire Gauge 15-Gauge (15 GA)
Fastener Angle & Style 34° "DA" Style Strip Nails
Fastener Length Capacity 1-1/4 in. to 2-1/2 in. (31.75 mm to 63.5 mm)
Minimum Operating Pressure 70 PSI
Magazine Loading Type Angled Strip Loading
Engine Motor Architecture Oil-Free / Maintenance-Free
Pneumatic Air Inlet Fitting Size 1/4 in. NPT Swivel Fitting
Tool Net Operating Weight 3.7 lbs (1.68 kg)
Overall Product Length 15.7 in. (39.88 cm)
Overall Product Height 14.3 in. (36.32 cm)
Pro-Tip: Use the integrated 16-inch on-center flip gauge directly against installed drywall to locate underlying wall studs quickly before driving 15-gauge finish nails into heavy baseboard trim.