Close-up angled view of the red Diablo carbide tipped hole saw cup, showing the side plug ejection holes and the 'Carbide Tipped For Wood & Metal' label.
Full-length product image of the red Diablo carbide teeth hole saw cup, highlighting the tall body and jagged carbide cutting teeth.
Retail packaging of the Diablo 1-1/16 inch carbide tipped hole saw, highlighting key features including 50X longer life, 2-3/8 inch cutting depth, and compatibility with wood, nails, and metal.
Three-step diagram illustrating the Diablo Snap-Lock Plus system's fast, tool-free plug ejection mechanism, showing the wooden material plug being quickly released from the hole saw cup.
Diagram illustrating the quick-change feature of the Diablo Snap-Lock Plus Mandrel System, with arrows showing the twist and pull motion to quickly detach or attach the hole saw cup.
Comparison diagram showing the increased cutting depth of the Diablo hole saw (2-3/8 inches) compared to a standard hole saw (1-5/8 inches), demonstrating the single-pass drilling advantage through 2x material.
Action shot of the red Diablo carbide tipped hole saw attached to a drill, cutting a clean through-hole into a curved piece of metal piping.
Close-up angled view of the red Diablo carbide tipped hole saw cup, showing the side plug ejection holes and the 'Carbide Tipped For Wood & Metal' label.
Full-length product image of the red Diablo carbide teeth hole saw cup, highlighting the tall body and jagged carbide cutting teeth.
Retail packaging of the Diablo 1-1/16 inch carbide tipped hole saw, highlighting key features including 50X longer life, 2-3/8 inch cutting depth, and compatibility with wood, nails, and metal.
Three-step diagram illustrating the Diablo Snap-Lock Plus system's fast, tool-free plug ejection mechanism, showing the wooden material plug being quickly released from the hole saw cup.
Diagram illustrating the quick-change feature of the Diablo Snap-Lock Plus Mandrel System, with arrows showing the twist and pull motion to quickly detach or attach the hole saw cup.
Comparison diagram showing the increased cutting depth of the Diablo hole saw (2-3/8 inches) compared to a standard hole saw (1-5/8 inches), demonstrating the single-pass drilling advantage through 2x material.
Action shot of the red Diablo carbide tipped hole saw attached to a drill, cutting a clean through-hole into a curved piece of metal piping.
DIABLO

Diablo Hole Saw DHS1063CT 1-1/16 Inch (Carbide Teeth Snap Lock Plus 2-3/8 Inch Deep Cut 50X Life Wood Stainless Steel Plumbing Electrical)

In stock
SKU: DHS1063CT
$12.99 USD

Description

Diablo Tools Logo

Diablo DHS1063CT 1-1/16-Inch Carbide-Tipped Hole Saw Cup

The Diablo DHS1063CT 1-1/16-Inch Carbide-Tipped Hole Saw Cup is an industrial hole-boring cutter engineered to drill clean pass-through openings across stainless steel, cast iron, nail-embedded wood, plastics, and aluminum. Featuring high-density carbide teeth, a 2-3/8-inch (60mm) deep cutting capacity, variable tooth geometry, and a tool-free plug ejection system, this cup connects directly to the Diablo Snap-Lock Plus mandrel. Designed for corded and cordless drills, this carbide hole cutter delivers 50X longer cutting life than bi-metal hole saws, solving tooth stripping, plug jamming, and multi-pass drilling limitations on commercial electrical and plumbing installations.

Best Used For:

  • Electrical Conduit & Cable Pass-Throughs: Boring 1-1/16-inch diameter holes through metal junction boxes, steel studs, and exterior wall panels.
  • Plumbing Pipe & Tubing Hole Cutting: Drilling single-pass holes through 2x dimensional lumber, nail-embedded framing, and cast iron plates.
  • HVAC & Metal Enclosure Fabrication: Executing clean, burr-free cuts through stainless steel sheet metal and heavy structural alloys.

Key Performance & Safety Features

  • High-Density Carbide Tooth Matrix: Engineered carbide teeth deliver up to 50X longer cutting life in abrasive metals compared to bi-metal hole saws.
  • 2-3/8-Inch (60mm) Deep Cut Profile: Extra-deep cup design enables single-pass drilling through 2x dimensional lumber and thick composite materials.
  • Tool-Free Plug Ejection System: Snap-Lock Plus mechanism permits rapid, tool-free core slug removal without prying with screwdrivers.
  • Variable Tooth Geometry Profile: Optimized gullet spacing reduces operational chatter and vibration for faster, smoother hole entry.
  • Snap-Lock Plus Mandrel System Interface: Quick-change cup system allows rapid size swapping without chucking out the drive mandrel.

What's Included

  • (1) Diablo DHS1063CT 1-1/16 in. Carbide-Tipped Hole Saw Cup
  • Note: Snap-Lock Plus pilot mandrel (e.g., DHSAR375) sold separately.

Technical Specifications

Manufacturer Brand Diablo by Freud
Model Part Number (OEM) DHS1063CT
Hole Saw Cutting Diameter 1-1/16 in. (26.98 mm)
Maximum Usable Depth of Cut 2-3/8 in. (60.0 mm) Single Pass
Cutter Rim Tooth Material High-Density Carbide Teeth
Mandrel System Interface Diablo Snap-Lock Plus System
Slug Removal Feature Tool-Free Quick-Release Plug Ejection
Comparative Tool Longevity Up to 50X Longer Life vs. Bi-Metal
Power Tool System Compatibility 1/2 in. and 3/8 in. Corded/Cordless Drill Drivers
Primary Target Substrates Wood, Nail-Embedded Wood, Stainless Steel, Cast Iron, Aluminum, Plastics
Tool Classification Type Carbide-Tipped Hole Saw Cup
Pro-Tip: Press the red release button on your Snap-Lock Plus mandrel and slide the hole saw cup backward along the pilot bit to instantly push out stubborn wood or metal core plugs.