A studio product photograph of the Freud 32-110 Rabbeting router bit featuring a red Perma-SHIELD body, two carbide cutting flutes, and a silver ball bearing pilot on a 1/2 inch shank.
A technical profile diagram for the Freud 32-110 bit illustrating a rabbet cut into wood with a specified maximum depth of 1/2 inch and a maximum height of 3/4 inch.
A studio product photograph of the Freud 32-110 Rabbeting router bit featuring a red Perma-SHIELD body, two carbide cutting flutes, and a silver ball bearing pilot on a 1/2 inch shank.
A studio product photograph of the Freud 32-110 Rabbeting router bit featuring a red Perma-SHIELD body, two carbide cutting flutes, and a silver ball bearing pilot on a 1/2 inch shank.
A technical profile diagram for the Freud 32-110 bit illustrating a rabbet cut into wood with a specified maximum depth of 1/2 inch and a maximum height of 3/4 inch.
A studio product photograph of the Freud 32-110 Rabbeting router bit featuring a red Perma-SHIELD body, two carbide cutting flutes, and a silver ball bearing pilot on a 1/2 inch shank.
Freud

Freud Router Bit 32-110 1-3/8 In Dia 1/2 In Shank Rabbeting (16000 RPM TiCo Carbide Perma-SHIELD Ball Bearing Pilot Cabinet Joinery Millwork Tool)

Only 1 left
SKU: 32-110
$36.97 USD

Description

Freud precisely the best logo Logout

Precision Freud 1-3/8 Inch Diameter Rabbeting Router Bit 32-110 with 1/2 Inch Shank

The Freud 32-110 1-3/8-Inch Diameter Rabbeting Router Bit serves as a commercial-grade joinery tool engineered to execute precise 1/2-inch deep rabbet recesses and clean lap joints on solid hardwoods, softwoods, cabinet plywood, and wood composites. Manufactured with micrograin TiCo High-Density Carbide cutters coated in friction-reducing Red Perma-SHIELD non-stick finish, this heavy-duty 1/2-inch shank bit features a 3/8-inch ball bearing pilot, a 3/4-inch carbide height, and a 16,000 RPM maximum speed rating. Compatible with handheld routers and router table setups, this double-flute rabbeting bit slices cleanly across both shoulders of the cut to deliver burn-free, glass-smooth recesses for cabinet back panel inset installation and frame assembly.

Best Used For:

  • Cabinet Back Panel Recess Milling: Cutting clean 1/2-inch deep stepped rabbets along the interior rear perimeter of cabinet carcasses to flush-mount backing plywood.
  • High-Strength Lap Joint Fabrication: Milling matching lap joint shoulders on hardwood drawer sides and box assemblies for reinforced glue-ups.
  • Guided Architectural Molding Insets: Routing edge steps and lip recesses into built-up millwork using interchangeable pilot bearings or router fences.

Key Performance & Safety Features

  • Precision Dual-Surface Shear Geometry: Two precision-ground carbide wings slice both the face and wall of the rabbet simultaneously for chatter-free joints.
  • Interchangeable Bearing Depth System: Pre-installed with a 3/8-inch bearing for a 1/2-inch rabbet depth; accepts alternate bearings to alter recess depth.
  • TiCo High-Density Micrograin Carbide: Proprietary titanium-cobalt carbide formulation maintains razor-sharp edges up to four times longer than standard carbide bits.
  • Red Perma-SHIELD Thermal Barrier Coating: Non-stick fluoropolymer coating insulates the bit body against heat buildup, resin accumulation, and rust corrosion.
  • Heavy-Duty 1/2-Inch Steel Shank: Provides maximum anti-flex structural stability and vibration resistance during deep 3/4-inch vertical profile cuts.
  • Computer-Balanced Dynamically Balanced Body: Precision-balanced tool body eliminates vibration and chatter marks at speeds up to 16,000 RPM.

What's Included

  • (1) Freud 32-110 3/4" Height Rabbeting Router Bit with 1/2" Shank and 3/8" Bearing

Technical Specifications

Brand Name Freud
Model Number SKU 32-110
Product Tool Classification Cabinet Joinery Rabbeting Router Bit
Overall Cut Diameter (D) 1.375 in. (1-3/8 in.)
Shank Diameter (A) 0.500 in. (1/2 in.)
Carbide Cutting Height (h) 0.750 in. (3/4 in.)
Overall Bit Length (H) 2.000 in. (2 in.)
Standard Rabbeting Cut Depth 0.500 in. (1/2 in.)
Pilot Ball Bearing Diameter (B) 0.375 in. (3/8 in.)
Small Tip Diameter (n) 0.375 in. (3/8 in.)
Number of Cutting Flutes 2 Carbide Wings
Maximum Rotational Speed 16,000 RPM (Speed Adjustment Required)
Protective Body Finish Red Perma-SHIELD Non-Stick Coating
Carbide Grade Composition TiCo High-Density Micrograin Carbide
Machine Equipment Compatibility Handheld Routers and Router Tables with 1/2" Collet
Target Substrates Hardwood, Softwood, Cabinet Plywood, MDF, Wood Composites

Pro-Tip: When routing deep 1/2-inch wide by 3/4-inch high rabbets into dense hardwood cabinet panels, adjust your variable-speed router to a maximum of 16,000 RPM. Make your passes in two incremental depth steps rather than taking the full 1/2-inch width at once to prevent motor strain, eliminate corner chip-out, and guarantee clean 90-degree internal shoulders for your back panels.