Freud Router Bit 85-108 2-1/2 Inch (Solid Surface Edge Profile Decorative Trim Specially Formulated Carbide 1/2 Inch Shank 16000 RPM Handheld Routing)

Freud 85-108 2-1/2-Inch Solid Surface Steel Bearing Edge Profile Router Bit

The Freud 85-108 2-1/2-Inch Solid Surface Steel Bearing Edge Profile Router Bit is a professional composite fabrication tool engineered to rout custom decorative edge shapes on solid surface countertops, granite composites, and acrylic vanity tops. Operating at rotational speeds up to 16,000 RPM with a 1/2-inch shank, 1-1/4-inch carbide cutting height, and a precision steel pilot guide bearing, this dual-flute carbide-tipped bit delivers stable template tracking. Designed for handheld portable routers, this edge-profiling bit solves rough trim lines, template wandering, and edge-chipping challenges across commercial kitchen and bath millwork fabrication installations.

Best Used For:

• Solid Surface Countertop Edge Profiling: Milling elegant, highly visible decorative edge shapes along Corian and Avonite kitchen island borders and bar tops.
• Template-Guided Millwork Trim Shaping: Routing precise profile designs on solid composite architectural panels and reception desks using a steel guide bearing.
• Handheld Portable Router Edging: Executing controlled, chatter-free edge trimming passes on site using 1/2-inch collet portable routers.

Key Performance & Safety Features

• Precision Steel Pilot Bearing: High-strength steel guide bearing rides securely along router templates and workpiece edges for controlled tracking.
• 2-1/2-Inch Large Diameter Profile: Wide cutting capacity allows fabricators to rout deep, elaborate decorative edge profiles in a single continuous pass.
• Solid-Surface Formulated Carbide Cutters: High-density micrograin carbide edges resist thermal degradation from abrasive synthetic acrylic minerals and resins.
• 1-1/4-Inch Extended Carbide Height: Generous cutting height accommodates thick countertop overhangs and multi-layer edge buildups.
• Heavy-Duty 1/2-Inch Steel Shank Core: Rigid shank diameter increases stability and neutralizes bit flexing during heavy manual feed routing passes.
• 16,000 RPM Maximum Speed Rating: Dynamically balanced large-diameter cutter body delivers clean, burn-free finishes at controlled spindle speeds.

What's Included

• (1) Freud 85-108 2-1/2 in. Solid Surface Edge Profile Router Bit (1/2 in. Shank)
• (1) Precision Steel Pilot Guide Bearing (Pre-Installed)

Technical Specifications

Pro-Tip: Set your router speed dial to 16,000 RPM or lower when running this large 2-1/2-inch steel bearing bit to maintain optimal torque and prevent burning on dense solid surface edges.