Freud Crown Molding Router Bit 99-402 1/2 Inch Shank (1-1/4 Dia 2-1/4 Carbide Height 45 Degree TiCo Custom Architectural Trim Cutter)

High-Density 1/2 Inch Shank 1-1/4 Inch Diameter 45-Degree Crown Molding Router Bit

The Freud 99-402 Crown Molding Router Bit functions as an industrial architectural trim shaping cutter engineered to mill classic decorative crown moldings for ceilings, cabinetry, and furniture cornices. Constructed with micro-grain TiCo titanium cobalt carbide flutes, this 1/2-inch shank tool operates on CNC equipment and table-mounted routers at rotational speeds up to 18,000 RPM across solid hardwoods, softwoods, plywood, and composite timber stock. The 1-1/4-inch overall diameter cutter features a 2-1/4-inch carbide cutting height at a 45-degree angle profile with dual radiuses (17/32 in. large, 7/32 in. small), coated with a non-stick red Perma-SHIELD fluoropolymer barrier that enables finish carpenters to alter profile dimensions by adjusting router table fence and bit height configurations.

Best Used For:

• Architectural Crown Molding Fabrication: Milling custom ceiling cornice trims and decorative wall borders from solid hardwood or paint-grade pine stock.
• Cabinet Cornice & Header Detailing: Shaping upper decorative trim strips for high-end kitchen cabinetry, built-in bookcases, and furniture crowns.
• Historical Millwork Reproduction: Replicating classic 45-degree architectural moldings with custom radiuses during historical interior restoration projects.

Key Performance & Safety Features

• 2-1/4 Inch Vertical Carbide Height: Generous cutting span shapes classic 45-degree angled crown molding profiles in a single setup.
• TiCo Hi-Density Carbide Flutes: Custom micro-grain titanium cobalt carbide formula maintains razor-sharp edges through abrasive hardwood runs.
• Perma-SHIELD Non-Stick Coating: Thermal red fluoropolymer coating prevents pitch accumulation, reduces friction, and guards against rust.
• Versatile Setup Adjustability: Profile width and geometry can be altered by adjusting fence depth and bit height relative to the stock.
• CNC & Table Router Requirement: Engineered specifically for safe material control and zero-chatter shaping on table-mounted routers and CNC spindles.

What's Included

• (1) Freud 99-402 1-1/4" Diameter Crown Molding Router Bit with 1/2" Shank

Technical Specifications

Pro-Tip: Due to the 2-1/4 inch carbide height, mill crown molding stock in two or three progressive depth passes using featherboards to hold the workpiece against the fence. Taking incremental passes reduces vibration at 18,000 RPM, prolongs TiCo carbide edge sharpness, and delivers a smooth, stain-ready surface.