Front view of the red Freud LU83R010 10-inch saw blade featuring 50 teeth, laser-cut anti-vibration vents, and text specifying Thin Kerf Combination for Ripping and Crosscutting.
Infographic titled Materials displaying samples of compatible wood types including Veneered Plywood, Hardwoods, Softwoods, and Laminate.
Studio shot of the red Freud LU83R010 saw blade standing upright on a wooden work surface with a blurred workshop background.
Graphic titled Tools displaying icons of compatible machinery including Radial Arm Saw, Stationary Table Saw, Portable Table Saw, and Miter Saw.
Graphic titled Depth of Cut illustrating recommended cutting depths for the blade, showing Ripping range from 3/8 inch to 1-1/2 inch and Crosscutting range from 3/4 inch to 3-1/2 inch.
Chart titled Recommended Use rating the blade's performance as Excellent for Crosscuts, Chip Board, and Plywood; and Good for Rips and Laminate.
Infographic titled Carbide Grade displaying a gauge indicating the specific TiCo Hi-Density Carbide blend H01K, pointing towards high impact strength for durability.
Technical diagram titled Application showing the side and top views of the blade teeth, illustrating the Combination design with 10-degree hook angles and flat top rakers.
Graphic titled Thin Kerf showing a side profile of the blade tooth, highlighting that it requires less power and allows for a faster feed rate.
Front view of the red Freud LU83R010 10-inch saw blade featuring 50 teeth, laser-cut anti-vibration vents, and text specifying Thin Kerf Combination for Ripping and Crosscutting.
Infographic titled Materials displaying samples of compatible wood types including Veneered Plywood, Hardwoods, Softwoods, and Laminate.
Studio shot of the red Freud LU83R010 saw blade standing upright on a wooden work surface with a blurred workshop background.
Graphic titled Tools displaying icons of compatible machinery including Radial Arm Saw, Stationary Table Saw, Portable Table Saw, and Miter Saw.
Graphic titled Depth of Cut illustrating recommended cutting depths for the blade, showing Ripping range from 3/8 inch to 1-1/2 inch and Crosscutting range from 3/4 inch to 3-1/2 inch.
Chart titled Recommended Use rating the blade's performance as Excellent for Crosscuts, Chip Board, and Plywood; and Good for Rips and Laminate.
Infographic titled Carbide Grade displaying a gauge indicating the specific TiCo Hi-Density Carbide blend H01K, pointing towards high impact strength for durability.
Technical diagram titled Application showing the side and top views of the blade teeth, illustrating the Combination design with 10-degree hook angles and flat top rakers.
Graphic titled Thin Kerf showing a side profile of the blade tooth, highlighting that it requires less power and allows for a faster feed rate.
DIABLO

Freud Saw Blade LU83R010 10 Inch 5/8 Arbor (50T COMB TiCo Carbide 0.091 Thin Kerf 7000 RPM Perma-SHIELD Ripping Crosscutting Wood Plywood Slicer)

Only 2 left
SKU: LU83R010
$58.79 USD

Description

Freud precisely the best logo Logout

Industrial-Grade 10 Inch 50-Tooth Thin Kerf Combination Circular Saw Blade

The Freud LU83R010 10-Inch 50-Tooth Combination Circular Saw Blade functions as an all-purpose wood cutting disc engineered to execute fast rip passes and smooth crosscuts through hardwoods, softwoods, plywood, and particle board. Manufactured with TiCo high-density titanium cobalt combination carbide tips ground in a 4 ATB plus 1 Flat Raker configuration, this 5/8-inch arbor blade operates on jobsite table saws and miter saws running up to 7,000 RPM. Featuring a 0.091-inch thin kerf geometry, a 10-degree positive hook angle, laser-cut anti-vibration slots, and a thermal red Perma-SHIELD non-stick coating, the blade minimizes saw amp draw while eliminating pitch gumming and lateral wheel vibration.

Best Used For:

  • All-Purpose Table Saw Ripping & Crosscutting: Executing clean 3/8-inch to 1-1/2-inch rip cuts and 3/4-inch to 3-1/2-inch crosscuts in wood without blade changeovers.
  • Plywood & Chipboard Sheet Trimming: Slicing veneer-faced cabinet plywood and composite chipboard sheets with minimal face tearout.
  • Furniture & Fine Joinery Framing: Milling smooth edge joints and component lengths in oak, maple, walnut, and softwood pine.

Key Performance & Safety Features

  • Smart 5-Teeth Combination Geometry: Configured with groups of four ATB teeth for clean crosscuts followed by one flat raker tooth and deep gullets for fast rip swarf ejection.
  • Thin Kerf Design (0.091 in.): Reduces physical material removal to maximize effective cutting torque on portable and lower-horsepower jobsite table saws.
  • TiCo High-Density Combination Carbide: Custom-formulated micro-grain titanium cobalt carbide tips maintain keen cutting edges through abrasive wood resins.
  • Laser-Cut Anti-Vibration Slots: Engine-etched dampening vents trap thermal noise and prevent sideways movement, eliminating the need for blade stabilizers.
  • Perma-SHIELD Non-Stick Thermal Barrier: Red fluoropolymer coating guards against extreme friction heat, pitch gumming, and plate corrosion.
  • Computer-Controlled Thermal Tensioning: Laser-cut 0.071-inch steel plate remains flat, true, and wobble-free under continuous cutting loads.

What's Included

  • (1) Freud LU83R010 10" 50-Tooth Thin Kerf Combination Saw Blade with 5/8" Arbor

Technical Specifications

Brand Name Freud Tools
Model Number SKU LU83R010
Tool Classification Thin Kerf Combination Circular Saw Blade
Blade Outer Diameter 10.00 in.
Arbor Hole Specification 0.625 in. (5/8 in. Round)
Total Tooth Count 50 Teeth
Tooth Grind Geometry COMB (4 ATB + 1 Flat Raker)
Cutter Tip Composition TiCo™ High-Density Titanium Cobalt Carbide
Cutting Kerf Width 0.091 in. (2.3 mm)
Core Plate Thickness 0.071 in. (1.8 mm)
Hook Angle Geometry 10° Positive Hook Angle
Maximum Operating Speed 7,000 RPM
Recommended Rip Capacity 0.375 in. to 1.50 in. (3/8 in. to 1-1/2 in.)
Recommended Crosscut Capacity 0.75 in. to 3.50 in. (3/4 in. to 3-1/2 in.)
Surface Finish Treatment Perma-SHIELD® Non-Stick Fluoropolymer Red Coating
Primary Machine Compatibility 10-Inch Jobsite Table Saws, Contractor Saws & Miter Saws
Target Material Substrates Hardwoods, Softwoods, Plywood, Chipboard, Composite Wood

Pro-Tip: When ripping 5/4 or 6/4 hardwood lumber on a portable jobsite table saw, adjust the blade height so the 50 combination carbide teeth extend roughly 1/2 inch above the workpiece top face. Setting this projection allows the flat raker gullets to clear sawdust efficiently, preventing motor drag while taking advantage of the 0.091-inch thin kerf design.