A studio product shot of the red Freud LU87R008 8-inch thin kerf ripping circular saw blade, featuring 22 carbide teeth and industrial specifications printed on the face.
An informational graphic titled Materials showing 3D illustrations of plywood, hardwoods, softwoods, laminate, and OSB as suitable materials for this blade.
An informational graphic titled Tools showing gray-scale illustrations of a radial arm saw, a stationary table saw, and a portable table saw as compatible equipment.
A technical graphic titled Application illustrating the depth of cut range for the saw blade, showing a 3/4 inch minimum and a 2-3/4 inch maximum thickness.
A performance chart titled Recommended Use showing excellent quality ratings for ripping wood and good ratings for crosscutting wood, chip board, and plywood.
A technical graphic titled Carbide Grade featuring a gauge that highlights the H10S grade, indicating a specific balance of increasing hardness and impact strength.
A set of three technical diagrams showing the tooth geometry of the blade, including the 20-degree hook angle, the 15-degree bevel angle, and the relationship between the kerf, bevel, and plate thickness.
A close-up technical diagram of a single saw tooth highlighting the 20-degree positive hook angle designed for fast cutting and easy feeding.
A red Freud thin kerf ripping saw blade resting on a table saw surface next to several pieces of light-colored wood.
A studio product shot of the red Freud LU87R008 8-inch thin kerf ripping circular saw blade, featuring 22 carbide teeth and industrial specifications printed on the face.
An informational graphic titled Materials showing 3D illustrations of plywood, hardwoods, softwoods, laminate, and OSB as suitable materials for this blade.
An informational graphic titled Tools showing gray-scale illustrations of a radial arm saw, a stationary table saw, and a portable table saw as compatible equipment.
A technical graphic titled Application illustrating the depth of cut range for the saw blade, showing a 3/4 inch minimum and a 2-3/4 inch maximum thickness.
A performance chart titled Recommended Use showing excellent quality ratings for ripping wood and good ratings for crosscutting wood, chip board, and plywood.
A technical graphic titled Carbide Grade featuring a gauge that highlights the H10S grade, indicating a specific balance of increasing hardness and impact strength.
A set of three technical diagrams showing the tooth geometry of the blade, including the 20-degree hook angle, the 15-degree bevel angle, and the relationship between the kerf, bevel, and plate thickness.
A close-up technical diagram of a single saw tooth highlighting the 20-degree positive hook angle designed for fast cutting and easy feeding.
A red Freud thin kerf ripping saw blade resting on a table saw surface next to several pieces of light-colored wood.
Freud

Freud Circular Saw Blade LU87R008 8 Inch Thin Kerf Ripping Tool 5/8 Arbor 0.087 Width Underpowered Motor Protection Wood Cut

In stock
SKU: LU87R008
$39.89 USD

Description

Freud precisely the best logo Logout

Industrial Thin-Kerf Wood Ripping Blade with TiCo Carbide Teeth and Drag-Reducing Perma-Shield Coating

The Freud LU87R008 8 Inch Thin Kerf Ripping Circular Saw Blade delivers industrial-grade cutting velocity and exceptional motor efficiency on low-horsepower woodworking equipment. Engineered with a narrow 0.087-inch kerf profile, this specialized circular blade minimizes mechanical drag and reduces material waste to allow faster feed rates without stalling underpowered motors. This trade-focused cutting solution resolves motor overheating, severe timber binding, and rough cut surfaces on jobsite table saws and radial arm saws by pairing an aggressive 20-degree positive hook angle with premium high-density carbide teeth. Outfitted with a non-stick Perma-Shield thermal coating and anti-vibration stabilizer vents, this clean-running blade ensures smooth, chatter-free ripping passes through thick softwoods and dense hardwoods.

Best Used For:

  • Underpowered Machinery Ripping: Running thick hardwood boards through portable benchtop table saws and smaller radial arm saws without overloading the motor.
  • Thick Wood Dimensioning: Executing clean longitudinal rip cuts in solid maple, oak, and pine lumber ranging from 3/4 inch to 2-3/4 inches in thickness.
  • Precision Cabinetry Preparation: Processing straight, glue-line ready edges on furniture-grade lumber with minimal material loss.

Key Performance & Safety Features

  • Premium TiCo Carbide Blend: Specially formulated high-density titanium cobalt carbide teeth maintain a razor-sharp edge longer during continuous ripping.
  • High-Efficiency Thin Kerf: The 0.087-inch kerf width reduces cutting resistance to preserve saw horsepower and maximize motor service life.
  • Perma-Shield Non-Stick Armor: Advanced red protective coating reduces blade drag by up to 33% to prevent pitch build-up and heat warping.
  • Aggressive Hook Geometry: Features a 20° positive hook angle that enables fast, effortless feeding and rapid chip clearance.
  • Laser-Cut Stabilizer Vents: Built-in anti-vibration slots trap noise and prevent blade wobble to yield a smooth, burn-free surface finish.

What's Included

  • (1) Freud LU87R008 8" Thin Kerf Ripping Circular Saw Blade

Technical Specifications

Specification Value
Brand Name Freud
Model Number LU87R008
Blade Nominal Diameter 8 in.
Arbor Hole Size 5/8 in.
Tooth Count 22 Teeth
Kerf Width 0.087 in.
Hook Angle 20° Positive
Plate Body Thickness 0.063 in.
Tooth Grind Configuration ATB (Alternate Top Bevel)
Blade Coating Type Red Perma-Shield™ Non-Stick Coating
Optimal Cutting Depth 3/4 in. to 2-3/4 in.
Material Compatibility Hardwood, Softwood, and Plywood
Tool Compatibility Low-Power Table Saws & Radial Arm Saws

Pro-Tip: When ripping dense lumber stock near the 2-3/4 inch maximum depth capacity, adjust your saw fence alignment precisely parallel to the blade. This prevents binding on the rising rear teeth, allowing the thin 0.087-inch kerf to track perfectly straight without overheating the plate.