Front view of the Freud LU91R012 12-inch 72-tooth industrial thin kerf sliding miter saw blade featuring a red Perma-SHIELD non-stick coating, anti-vibration slots, and 1-inch arbor.
Application graphic for the Freud thin kerf sliding miter blade showing a minimum depth of cut of 1/2 inch and a maximum depth of cut of 2-3/4 inches.
Recommended use and cut quality chart for the Freud industrial sliding miter blade, showing excellent results for crosscutting wood and good results for laminate.
Carbide grade gauge for the Freud LU91R012 miter blade highlighting the H10S grade for increased hardness and long-lasting sharpness.
Technical tooth geometry diagram for the Freud 72-tooth miter blade illustrating the -5 degree hook angle and 15 degree Alternate Top Bevel (ATB) grind.
Detailed diagram of the -5 degree negative hook angle designed to minimize climbing and provide better control during sliding miter saw operations.
Materials compatibility chart for the Freud industrial crosscutting blade showing suitability for plywood, hardwoods, softwoods, laminate, and crosscutting wood.
Tool compatibility graphic indicating the Freud LU91R012 thin kerf blade is designed for use with radial arm saws, slide miter saws, and portable table saws.
Front view of the Freud LU91R012 12-inch 72-tooth industrial thin kerf sliding miter saw blade featuring a red Perma-SHIELD non-stick coating, anti-vibration slots, and 1-inch arbor.
Application graphic for the Freud thin kerf sliding miter blade showing a minimum depth of cut of 1/2 inch and a maximum depth of cut of 2-3/4 inches.
Recommended use and cut quality chart for the Freud industrial sliding miter blade, showing excellent results for crosscutting wood and good results for laminate.
Carbide grade gauge for the Freud LU91R012 miter blade highlighting the H10S grade for increased hardness and long-lasting sharpness.
Technical tooth geometry diagram for the Freud 72-tooth miter blade illustrating the -5 degree hook angle and 15 degree Alternate Top Bevel (ATB) grind.
Detailed diagram of the -5 degree negative hook angle designed to minimize climbing and provide better control during sliding miter saw operations.
Materials compatibility chart for the Freud industrial crosscutting blade showing suitability for plywood, hardwoods, softwoods, laminate, and crosscutting wood.
Tool compatibility graphic indicating the Freud LU91R012 thin kerf blade is designed for use with radial arm saws, slide miter saws, and portable table saws.
Freud

Freud LU91R012 12 Inch 72 Tooth Thin Kerf Sliding Compound Miter Blade ATB Crosscutting Fine Finish Radial Arm Saw 1 Inch Arbor

Only 3 left
SKU: LU91R012
$87.19 USD

Description

Unmatched Precision and Control for Sliding Compound Miter Saws

Unlock the full potential of your sliding compound miter saw or radial arm saw with the Freud LU91R012 12-Inch Thin Kerf Blade. Specifically engineered to address the unique challenges of sliding saws, this industrial-grade blade features a 5° negative hook angle. This crucial design element prevents the blade from "climbing" or becoming too aggressive during the cut, pushing the workpiece down and against the fence for superior control and safety. The thin kerf geometry removes less material than standard carbide blades, significantly reducing the strain on your motor and allowing for faster feed rates without sacrificing cut quality.

Achieve mirror-smooth finish cuts with Freud's premium TiCo™ Hi-Density Carbide Crosscutting Blend, designed to retain a sharp edge longer even in hardwoods and softwoods. The 72-tooth Alternate Top Bevel (ATB) configuration ensures effortless crosscutting with minimal tear-out. To further enhance performance, the blade is shielded by Freud's Perma-SHIELD™ Non-Stick Coating, which reduces drag and protects the steel body from corrosion, heat build-up, and pitch accumulation. Whether you are a professional trim carpenter or a dedicated woodworker, this blade delivers the stability and precision required for flawless results.

Key Features

  • Negative Hook Angle (-5°): Minimizes blade "climbing" to provide better control and safety on sliding compound miter saws and radial arm saws.
  • TiCo™ Hi-Density Carbide: A premium carbide blend specifically formulated for crosscutting applications to ensure maximum sharpness and durability.
  • Thin Kerf Design: Removes less wood to reduce power consumption and allow for smoother, faster feed rates.
  • Perma-SHIELD™ Coating: Non-stick formulation reduces friction, prevents rust, and resists gumming and pitch build-up.
  • Precision Tensioning: Laser-cut blade body ensures the blade remains flat and true under load for accurate cuts.
  • Versatile Application: Ideal for fine finish crosscuts in wood with a depth of cut ranging from 1/2" to 2-3/4".

What's Included

(1) 12-Inch x 72-Tooth Thin Kerf Sliding Compound Miter Saw Blade

Specifications

Blade Diameter 12 Inches
Number of Teeth 72
Arbor Size 1 Inch
Tooth Grind ATB (Alternate Top Bevel)
Kerf Thickness 0.090 Inches
Hook Angle -5° (Negative)
Plate Thickness 0.071 Inches
Blade Material TiCo™ Hi-Density Carbide
Recommended Tool Sliding Miter Saw, Radial Arm Saw
Model Number LU91R012

Pro-Tip: The negative hook angle is the secret weapon for Radial Arm Saws and Sliding Miter Saws. Standard blades often want to "climb" over the wood or pull the saw carriage forward aggressively (self-feeding). This blade's -5° angle pushes the wood down and back, preventing that scary climbing sensation and ensuring a safer, smoother operation.