Studio view of the 11-piece GearWrench 120XP ratcheting wrench set arranged by size from smallest to largest showing the polished chrome finish.
Infographic of a single 120XP wrench highlighting features including the universal spline drive, 120-position 3-degree swing arc, reduced box end diameter, and XL beam design.
Close-up of the open end of a polished chrome GearWrench combination wrench showing the smooth jaw profile.
Close-up of the ratcheting box end of a GearWrench combination wrench showing the black universal spline drive mechanism.
Front view of the GearWrench 120XP 11-piece SAE combination ratcheting wrench set retail packaging box.
Back of the retail packaging for the GearWrench 120XP wrench set detailing features like the reduced open end head size and dual-direction off-corner loading.
Graphic labeled 3 Degree Swing Arc For Tighter Turns showing a diagram of the gear mechanism with 120XP branding.
Graphic labeled Dual Pawl Design For 120 Positions showing the internal stacked pawl mechanism engaging with gear teeth.
Graphic labeled Off-Corner Loading Reduces Fastener Rounding showing a diagram of force being applied to the flats of a hex fastener.
Graphic labeled High Visibility Marking For Easy Identification showing a magnifying glass over the size marking on a wrench.
Top-down view of a GearWrench 120XP 5/8 inch ratcheting wrench tightening a valve cover bolt on an engine block.
Close-up of a hand using a GearWrench 120XP ratcheting wrench on a bolt near industrial pipes with metal shavings on the floor.
Close-up of a GearWrench 9/16 inch open end wrench loosening a silver bolt on a red engine component.
GearWrench® 120XP™ Ratcheting Wrenches promotional video
Studio view of the 11-piece GearWrench 120XP ratcheting wrench set arranged by size from smallest to largest showing the polished chrome finish.
Infographic of a single 120XP wrench highlighting features including the universal spline drive, 120-position 3-degree swing arc, reduced box end diameter, and XL beam design.
Close-up of the open end of a polished chrome GearWrench combination wrench showing the smooth jaw profile.
Close-up of the ratcheting box end of a GearWrench combination wrench showing the black universal spline drive mechanism.
Front view of the GearWrench 120XP 11-piece SAE combination ratcheting wrench set retail packaging box.
Back of the retail packaging for the GearWrench 120XP wrench set detailing features like the reduced open end head size and dual-direction off-corner loading.
Graphic labeled 3 Degree Swing Arc For Tighter Turns showing a diagram of the gear mechanism with 120XP branding.
Graphic labeled Dual Pawl Design For 120 Positions showing the internal stacked pawl mechanism engaging with gear teeth.
Graphic labeled Off-Corner Loading Reduces Fastener Rounding showing a diagram of force being applied to the flats of a hex fastener.
Graphic labeled High Visibility Marking For Easy Identification showing a magnifying glass over the size marking on a wrench.
Top-down view of a GearWrench 120XP 5/8 inch ratcheting wrench tightening a valve cover bolt on an engine block.
Close-up of a hand using a GearWrench 120XP ratcheting wrench on a bolt near industrial pipes with metal shavings on the floor.
Close-up of a GearWrench 9/16 inch open end wrench loosening a silver bolt on a red engine component.
GearWrench® 120XP™ Ratcheting Wrenches promotional video
GEARWRENCH

GearWrench Ratcheting Wrench Set 86450 11 Piece 120XP Universal Spline XL SAE (3 Degree Swing Arc Full Polish Chrome Alloy Steel)

In stock
SKU: 86450
$159.00 USD

Description

Gearwrench Forge Ahead Logo Logout

GearWrench 86450 11-Piece 120XP Universal Spline XL SAE Ratcheting Wrench Set

The GearWrench 86450 11-Piece 120XP Universal Spline XL Ratcheting Wrench Set is an industrial hand tool system engineered for high-torque fastening across tight engine bays and restricted equipment clearances. Powered by double-stacked 60-tooth pawls delivering 120 positions and an ultra-tight 3-degree swing arc, this 2.86-pound alloy steel set features Universal Spline box ends that fit six distinct fastener profiles, including 6-point, 12-point, E-Torx, spline, square, and partially rounded hex heads. Built with an extended XL beam length up to 25% longer than standard wrenches, these full-polish chrome SAE wrenches maximize leverage and reach when breaking loose seized nuts and bolts in automotive and industrial applications.

Best Used For:

  • Restricted Access Engine & Chassis Repair: Turning hard-to-reach automotive fasteners in tight engine compartments requiring a minimal 3-degree handle swing arc.
  • Multi-Profile Fastener Servicing: Engaging 6-point, 12-point, E-Torx, spline, square, and damaged hex fasteners with a single universal box end.
  • High-Torque Bolt Breakaway: Applying extra leverage on stubborn or frozen SAE nuts using the 25% longer XL beam wrench shaft.

Key Performance & Safety Features

  • 120XP Double-Stacked Pawl Technology: Alternating 60-tooth pawls produce a 120-position ratcheting mechanism for precise 3-degree swing arc operation in cramped spaces.
  • Universal Spline Drive Box End: Specialized box end profile grips 6 fastener geometries: 6-point, 12-point, rounded 6-point, spline, E-Torx, and 4-point square heads.
  • 25% Extended XL Beam Geometry: Longer wrench shaft design increases mechanical leverage to decrease manual effort on high-torque applications.
  • Off-Corner Loading Surface Grip: Box end design directs rotational force onto the flat sides of the fastener head rather than the corners to prevent stripping.
  • Slim-Line Head & Open-End Profile: Reduced box-end diameter and slim open-end head slip into narrow mechanical gaps where standard thickness wrenches bind.
  • High-Visibility Color-Coded Markings: Color-coded recessed size stamps (Red for SAE) allow fast size identification inside dark tool chests and work bays.

What's Included

  • (1) 1/4" 120XP Universal Spline XL Combination Ratcheting Wrench
  • (1) 9/32" 120XP Universal Spline XL Combination Ratcheting Wrench
  • (1) 5/16" 120XP Universal Spline XL Combination Ratcheting Wrench
  • (1) 11/32" 120XP Universal Spline XL Combination Ratcheting Wrench
  • (1) 3/8" 120XP Universal Spline XL Combination Ratcheting Wrench
  • (1) 7/16" 120XP Universal Spline XL Combination Ratcheting Wrench
  • (1) 1/2" 120XP Universal Spline XL Combination Ratcheting Wrench
  • (1) 9/16" 120XP Universal Spline XL Combination Ratcheting Wrench
  • (1) 5/8" 120XP Universal Spline XL Combination Ratcheting Wrench
  • (1) 11/16" 120XP Universal Spline XL Combination Ratcheting Wrench
  • (1) 3/4" 120XP Universal Spline XL Combination Ratcheting Wrench

Technical Specifications

Brand / Manufacturer GearWrench
Model / Part Number 86450
Measurement System SAE (Imperial / Fractional)
Piece Count 11 Pieces
Size Range Included 1/4 in. to 3/4 in. (1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4")
Ratchet Mechanism & Tooth Count 120XP Double-Stacked Pawls (120 Positions)
Minimum Swing Arc 3.0 Degrees
Box End Drive Type Universal Spline (Fits 6-pt, 12-pt, Spline, E-Torx, Square, Rounded 6-pt)
Beam Length Format Extra Long (XL Beam Pattern)
Box End Offset Angle 0 Degrees Straight Profile
Material Construction Heat-Treated Alloy Steel
Finish & Coating Full Polish Chrome Finish
Total Weight 2.86 lbs (1.30 kg)
Pro-Tip: Use the open end for initial high-torque fastener loosening, then slip the 3-degree 120XP ratcheting box end onto the bolt head to rapidly back out thread passes in tight clearances without resetting the tool angle.